[1] Azadi M, Safarloo S, Loghman F, Rasouli R (2018) Microstructural and thermal properties of piston aluminum alloy reinforced by nano-particles. AIP Conf Proc 1920: 020027.

[2] Azadi M, Zolfaghari M, Rezanezhad S, Azadi M (2018) Preparation of various aluminum matrix composites reinforcing by nanoparticles with different dispersion methods. Proc. Iran Int Aluminum Conf.

[3] Azadi M, Zolfaghari M, Rezanezhad S, Azadi M (2018) Effects of SiO₂ nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods. Appl Phys A 124(5): 377.

[4] Ishikawa K, Okuda H, Kobayashi Y (1997) Creep behaviors of highly pure aluminum at lower temperatures. Mater Sci Eng A 234-236: 154-156.

[5] Jahromi SAJ (2002) Creep behavior of spray-cast 7XXX aluminum alloy. Mater Des 23: 169-172.

[6] Ishikawa K, Kobayashi Y (2004) Creep and rupture behavior of a commercial aluminum-magnesiumalloy A5083 at constant applied stress. Mater Sci Eng A 387-389: 613-617.

[7] Dobes F, Milicka K (2004) Comparison of thermally activated overcoming of barriers in creep of aluminum and its solid solutions. Mater Sci Eng A 387-389: 595-598.

[8] Srivastava V, Williams JP, McNee KR, Greenwood GW, Jones H (2004) Low stress creep behavior of 7075 high strength aluminum alloy. Mater Sci Eng A 382: 50-56.

[9] Lina J, Kowalewskib ZL, Caoa J (2005) Creep rupture of copper and aluminum alloy under combinedLoadings-experiments and their various descriptions. Int J Mech Sci 47:1038-1058.

[10] Requena G, Degischer HP (2006) Creep behavior of unreinforced and short fiberreinforced AlSi12CuMgNi piston alloy. Mater. Sci. Eng. A 420: 265-275.

[11] Couteau O, Dunand DC (2008) Creep of aluminum syntactic foams. Mater Sci Eng A 488: 573-579.

[12] Diologent F, Goodall R, Mortensen A  (2009)  Creep of aluminum syntactic foams. Acta Mater 57: 830-837.

[13] Jeong CY (2012)Effect of alloying elements on high temperature mechanical properties for piston alloy. Mater Trans 53: 234-239.

[14] Li LT, Lin YC, Zhou HM, Jiang YQ (2013) Modeling the high-temperature creep behaviors of 7075 and 2124aluminum alloys by continuum damage mechanics model. Comput Mater Sci 73: 72-78.

[15]  Yuana J, Wanga Q,  Yina D,  Wanga  H, Chena C, Yea B (2013)  Creep behavior of  Mg-9Gd-1Y-0.5Zr (wt.%) alloy piston bysqueeze casting. Mater Charact 78: 37-46.

[16] Maximov JT, Duncheva GV, Anchev AP, Ichkova MD (2014)  Modeling of strain hardening and creep behavior of 2024T3 aluminumalloy at room and high temperatures. Comput Mater Sci 83: 381-393.

[17] Fernandez-Gutierrez R, Requena GC (2014) The effect of spheroidization heat treatment on the creep resistance of a cast AlSi12CuMgNi piston alloy.  Mater Sci Eng A 598: 147-153.

[18] Spigarelli S, Sandstrom R (2018) Basic creep modelling of aluminum. Mater. Sci. Eng. A 711: 343-349.

[19] ASTM-E13911 (2012) Standard test methods for conducting creep, creep-rupture and stress-rupture tests of metallic materials. ASTM Int.

[20] Azadi M, Azadi M (2017) Evaluation of high- temperature creep behavior in Inconel-713C nickel-based superalloy considering effects of stress levels. Mater Sci Eng A 689: 298-305.

[21] Shi D, Dong C, Yang X, Sun Y, Wang J, Liu J (2013) Creep and fatigue lifetime analysis of directionally solidified superalloy and its brazed joints based on continuum damage mechanics at elevated temperature. Mater Des 45: 643-652.

[22] Seruga D, Fajdiga M, Nagode M (2011) Creep damage calculation for thermo-mechanical fatigue. J Mech Eng 57(5): 371-378.

[23] Donchie MJ, Donchie SJ (2002) Superalloys: A technical guide. ASM Int.

[24] Dieter GE (1998) Mechanical metallurgy. Mc-Graw Hill Book Company.

[25] Eftekhari M, Fatemi A (2016)  Creep behavior and modeling of neat, talc-filled, and short glass fiber reinforced thermoplastics. Compos Part B 97: 68-83.

[26] Monkman CF, Grant NJ (1956) An empirical relationship between rupture life and minimum creep rate in creep-rupture tests. ASTM Proc 56: 593-620.

[27] Dobes F, Milicka K (1976) The relation between minimum creep rate and time to fracture. Met Sci 10: 382-384.

[28] Creep and Swelling, Help of ABAQUS Software.

[29] Du Y, Yan N, Kortschot MT (2013) An experimental study of creep behavior of light weight natural fiber - reinforced polymer composite /honeycomb core sandwich panels. Compos  Struct 106: 160-116.

[30] Findley WN (1960) Mechanism and mechanics of creep of plastics. Division of Engineering, Brown University.

[31] Hadid M, Rechak S, Tati A (2004)  Long-term bending creep behavior prediction of injection molded composite using stress-time correspondence principle. Mater Sci Eng A 385(1-2): 8-54.

[32] Zhao Y, Gong J, Yong J, Wang X, Shen L, Li Q (2016) Creep behaviors of Cr25Ni35Nb and Cr35Ni45N alloys predicted by modified theta method Mater Sci Eng A 649: 1-8.

[33] Chaboche JL (1988) Continuum damage mechanics: Part I: General concepts. J Appl Mech 55: 59-64.

[34] Bahmanabadi H, Rezanezhad S, Azadi M, Azadi M  (2018) Characterization of creep damage and lifetime in Inconel-713C nickel-based superalloy by stress-based, strain/strain rate-based and continuum damage mechanics models. Mater Res Express 5: 026509.

[35] Yu SB, Kim MS (2016) Microstructure and high temperature deformation of extruded Al-12Si-3Cu-based alloy. Metals 6: 32.

[36] Abe F (2014) Development of creep-resistant steels and alloys for use in power plants. Structural Alloys for Power Plants. Chapter 9, Woodhead Publishing Series in Energy.