A 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks | ||
| Journal of Mining and Environment | ||
| مقاله 10، دوره 11، شماره 2، تیر 2020، صفحه 467-480 اصل مقاله (2.37 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2020.9267.1827 | ||
| نویسندگان | ||
| S. Sepehri؛ R. Shirinabadi* ؛ N. Hosseini Alaee؛ E. Moosavi؛ A. H. Bangian Tabrizi | ||
| Department of petroleum and Mining Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran | ||
| چکیده | ||
| In this research work, a 3D numerical modeling technique is proposed based on the 3D particle flow code in order to investigate the failure mechanism of rock foundations. Two series of footings with different geometries and areas are considered in this work. The failure mechanism obtained is similar to that of the Terzaghi’s but there is a negligible difference in between. Lastly, one equation is presented to calculate the bearing capacity based on the results achieved from the numerical model and the Mohr-Coulomb theory. The sensitivity analyses are performed on the friction angle, cohesion, and footing width. The results obtained are compared with the corresponding results given by the equations given by Terzaghi and Meyerhof. This comparison demonstrates a good agreement between them. In the friction angle sensitive analysis, the amounts of the bearing capacity diagram are very close to Meyerhof’s, which overlap with each other. | ||
| کلیدواژهها | ||
| Bearing capacity؛ Rock foundations؛ Shear failure mechanism؛ Particle flow code | ||
| مراجع | ||
|
[1]. Baazouzi, M. (2016). 2D Numerical Analysis of Shallow Foundation Rested Near Slope under Inclined Loading. Elsevier. Procedia Engineering, 143: 623-634. https://doi.org/10.1016/j.proeng.2016.06.086. [2]. Tajeri, Sh. (2015). Indirect estimation of the ultimate bearing capacity of shallow foundations resting on rock masses. International Journal of Rock Mechanics & Mining Sciences, Elsevier Ltd. 107–117. https://doi.org/10.1016/j.ijrmms.2015.09.015. [3]. Terzaghi K. (1943). Theoretical Soil Mechanics. [4] Meyerhof, G.G. (1963). Some recent research on the bearing capacity of foundations. Can. Geotech. 1 (1): 16-26. [5]. Dixit, M.S. (2013). Experimental Estimate of Ultimate Bearing Capacity and Settlement for Rectangular Footings. International Journal of Civil Engineering and Technology (IJCIET), 4 (2). [6]. Tahmasebi poor, A., Barari, A., Behnia, M. and Najafi, T. (2015). Determination of the ultimate limit states of shallow foundations using gene expression programming (GEP) approach. Soils and Foundations, 55(3): 650-659. https://doi.org/10.1016/j.sandf.2015.04.015. [7]. Israelsson, J.I. (1996). Short Descriptions of UDEC and 3DEC. In O. Stephansson, L. Jing, & C.-F. Tsang (Eds.), Developments in Geotechnical Engineering, 79: 523-528. [8]. Bretas, E.M., Léger, P. and Lemos, J.V. (2012). 3D stability analysis of gravity dams on sloped rock foundations using the limit equilibrium method. Computers and Geotechnics, 44. [9]. Lin, Y., Zhu, D., Deng, Q. and He, Q. (2012). Collapse Analysis of Jointed Rock Slope Based on UDEC Software and Practical Seismic Load. Procedia Engineering, 31: 441-446. https://doi.org/10.1016/j.proeng.2012.01.1049. [10]. Souley, M. and Homand, F. (1996). Stability of jointed rock masses evaluated by UDEC with an extended Saeb-Amadei constitutive law. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 33(3): 233-244. https://doi.org/10.1016/0148-9062 (95)00063-1. [11]. Zhou, H.-z., Zheng, G., Yu, X.-x., Zhang, T.-q. and Liu, J.-j. (2018). Bearing capacity and failure mechanism of ground improved by deep mixed columns. Journal of Zhejiang University-SCIENCE A, 19(4): 266-276. https://doi.org/10.1631/jzus.A1700517. [12]. Fernando, N., Sendanayake, E., Sendanayake, D. and and Silva, N.D. (2011). The Experimental Investigation of Failure Mechanism and Bearing Capacity of Different Types of Shallow Foundation. Civil Engineering Research for Industry, Department of Civil Engineering, University of Moratuwa. [13]. Ramadan, M.I. and Hussien, M.H. (2015). Bearing Capacity of Sand Overlying Clay – Strip Footing. International Journal of Science and Research (IJSR). 4 (11). [14] Castelli, F., Lentini, V. and Dean, E.T. (2015). Evaluation of the Bearing Capacity of Footings on Slopes. International Journal of Physical Modelling in Geotechnics, 15 (3): 165-168. [15]. Acharyya, R. and Dey, A. (2017). Finite Element Investigation of the Bearing Capacity of Square Footings Resting on Sloping Ground. INAE Letters, 2 (3): 97-105. https://doi.org/10.1007/s41403-017-0028-6 [16]. Potyondy, D.O. and Cundall, P.A. (2004). A bonded-particle model for rock. Int. J. Rock Mech. Min. Sci. 41: 1329–1364. [17]. Itasca Consulting Group Inc. (2008). PFC3D-Particle Flow Code in Three Dimensions, version 4.0; Itasca Consulting. [18]. Mas Ivars, D.M., Pierce, M.E., Darcel, C., Juan, R.M., Potyondy, D.O., Young, R.P. and Cundall, P.A. (2011). The synthetic rock mass approach for jointed rock mass modelling. Int. J. Rock Mech. Min. Sci. 48: 219–244. [19]. Vesic, A.S. (1973). Analysis of Ultimate Loads of Shallow Foundations. Journal of the Soil Mechanics and Foundations Division, 99 (1): 45-73. https://doi.org/10.1016/0148-9062(74)90598-1. [20]. Das, B.M. (2010). Principles of Foundation Engineering. 7th Ed, International Edition, 143-145. [21]. Meyerhof, G.G. (1963). Bearing Capacity of Concrete and Rock. Magazine of Concrete, April. https://doi.org/10.1680/macr.1953.4.12.107. [22]. Chavda, J.T. and Dodagoudar, G.R. (2019). Finite Element Evaluation of Vertical Bearing Capacity Factors , and for Ring Footings, Geotech Geol Eng, 37, 741–754, https://doi.org/10.1007/s10706-018-0645-1. [23]. Qiang, C. (2018). The efects of the geometric parameters of a circular shallow foundation on its uplift bearing capacity in loess soil. Acta Geotechnica Slovenica, 2: 74-80. https://doi.org/10.18690/actageotechslov.15.2. [24]. Chen, Q. (2015). Ultimate bearing capacity analysis of strip footings on reinforced soil foundation. Elsevier, Soils and Foundations Journal, 55(1): 74–85. https://doi.org/10.1016/j.sandf.2014.12.006. [25]. Latha, G.M. and Somwanshi, A. (2009). Effect of reinforcement form on the bearing capacity of square footings on sand, Elsevier, Geotextiles and Geomembranes, 27:409–422. [26]. Bowels, J.E. (1997). Foundation analysis and design. Fifth edition. | ||
|
آمار تعداد مشاهده مقاله: 993 تعداد دریافت فایل اصل مقاله: 602 |
||