Blast Design for Improved Productivity using a Modified Available Energy Method | ||
| Journal of Mining and Environment | ||
| مقاله 1، دوره 11، شماره 3، مهر 2020، صفحه 643-659 اصل مقاله (2.61 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2020.9506.1861 | ||
| نویسندگان | ||
| S. Mulenga* 1؛ R. Kaunda2 | ||
| 1Department of Mining Engineering, School of Mines, University of Zambia, Lusaka, Zambia | ||
| 2Department of Mining Engineering, Colorado School of Mines, Colorado, USA | ||
| چکیده | ||
| In this work, a new drilling and blasting design methodology is introduced and applied at a case study mine to improve productivity. For the case study copper mine, a blast diameter of 203 mm is proposed to be used in the ore zone to meet the new required production rate of 90mtpa from 75mtpa. Currently, the Konya and Walter’s model is used to generate drilling and blasting design at a blasthole diameter of 172 mm. The new drilling and blast design approach is advantageous in the sense that it generates a lower specific drilling value and predicts an average fragment size compared with the current method being used. In this regard, a modified available energy blast design method that incorporates the blastability index of ore zone in the calculation of the input powder factor is introduced. The results of the blast design simulations at a 203 mm blasthole diameter shows that the modified available energy model generates a drilling and blasting design with a specific drilling value that is 15.3% less than that generated by the Ash’s and Konya and Walter’s models. Further, the modified available energy model generates a blast design with a predicted average fragment size that is 3.4% smaller than that generated by the Ash’s model, and 6.7% smaller than that generated by the Konya and Walter’s model. | ||
| کلیدواژهها | ||
| Blasting optimization؛ Modified Available Energy؛ Specific drilling؛ Average fragment size | ||
| مراجع | ||
|
[1]. Faramarzi, F., Mansouri, H. and Ebrahimi Farsangi, M.A. (2013). A rock engineering systems based model to predict rock fragmentation by blasting. International Journal of Rock Mechanics and Mining Sciences 60, 82-94.
[2]. Karamia A. and Afiuni-Zadehb, S. (2012). Sizing of rock fragmentation modeling due to bench blasting using adaptive neuro-fuzzy inference system and radial basis function. International Journal of Mining Science and Technology 22, 459-463.
[3]. Thuro, K. and Spaun, G. (1996). Introducing the destruction work as a new rock property of toughness referring to drillability in conventional drill and blast tunneling. Rock Mech Rock Eng; 2:707–20.
[4]. Altindag, R. (2004). Evaluation of drill cuttings in prediction of penetration rate by using coarseness index and mean particle size in percussive drilling. GeotechGeol Eng; 22:417–25.
[5]. Köhler, M., Maidl, U. and Martak, L. (2011). Abrasiveness and tool wear in shield tunnelling insoil/Abrasivität und Werkzeugverschleiß beim Schildvortrieb imLockergestein. Geomech Tunn; 4:36–54
[6]. Yarali, O. and Soyer, E. (2013). Assessment of relationships between drilling rate index and mechanical properties of rocks. Tunn Undergr Sp Technol; 33:46–53.
[7]. Inanloo Arabi Shad H., Sereshki F., Ataei M. and Karammozian, M. (2018). Prediction of rotary drilling penetration rate in iron oxide using rock engineering system, International Journal of mining Science and Technology, Volume 28, Issue 3, May 2018, pp. 407-413.
[8]. Anderson, O. (1952). Blasthole burden design-introducing a new formula. Australian Institute of Mining and Metallurgy, Nos. 166–167, pp. 115–130.
[9]. Fraenkel, K.H. (1954). Handbook in Rock Blasting Technique, Part-1, Esselte AB, Stockholm, p. 378.
[10]. Pearse, G.E. (1955). Rock blasting: some aspects on theory and practice. Mine & Quary Engineering, Vol. 21, No. 1, pp. 25–30.
[11]. Hino, K. (1959). Theory and Practice of Blasting. Nippon Kayaku Co., Ltd., pp. 86–89.
[12]. Allsman, P.L. (1960). Analysis of explosive action in breaking rock. Transactions, Australian Institute of Mining and Metallurgy, Vol. 217, pp. 475, 476.
[13]. Ash, R.L. (1963). The mechanics of rock breakage (Part 2)–Standards for blasting design. Pit and Quarry, Vol. 56, No. 3, pp. 126–131.
[14]. Langefors, U. and Kihlström, B. (1963). The Modern Technique of Rock Blasting. Almquist and Wiksell, Stockholm, p. 438.
[15]. Hansen, D.W. (1967). Drilling and blasting techniques for morrow point power plant. Proceedings Ninth Symposium of Rock Mechanics, Golden, Colorado, pp. 347–360.
[16]. Konya, C.J. (1972). The Use of Shaped Explosive Charges to Investigate Permeability, Penetration, and Fracture Formation in Coal, Dolomite, and Plexiglas, PhD Dissertation, Department of Mining and Petroleum Engineering, University of Missouri at Rolla.
[17]. Foldesi, J. (1980) in Sereshki et al. [24].
[18] Praillet, R. (1980). A New Approach to Drilling and Blasting. Technical publications, Drilltech Inc., Alachua, USA, p. 73.
[29]. Jimeno, E.L. (1980). Parametros Criticos en la Fragmentacion de Rocas con Explosivos. 6th Journadas Minerometalurgicas, Huelva, pp. 178–185.
[20]. Konya, C.J. and Walter, E.J. (1983). Chap. 6 – blast monitoring. in Sendlein, L.V.A. et al. (Eds.): Surface Mining, Environmental Monitoring and Reclamation Handbook, New York, Elsevier Scientific Publishing Co., Montville, Ohio.
[21]. Carr, B. (1985) in Sereshki et al. [24].
[22]. Olofsson, S.O. (1990). Applied Explosive Technology for Construction and Mining. Applex, Arla, Sweden, p. 303.
[23]. Rustan, P.A. (1990). Burden, spacing and borehole diameter at rock blasting. The 3rd International Symposium on Rock Fragmentation by Blasting, 26–31 August, Brisbane, Australia, pp. 303–309.
[24]. Sereshki, F., Ataei, M. and Hoseinie, S.H. (2010). Comparison and analysis of burden design methods in blasting: a case study on Sungun copper mine in Iran. Int. J. Mining and Mineral Engineering, Vol. 2, No. 2, pp. 123–136.
[25]. Blair, A. C. (2015). A novel powder factor based bench blast design method for large surface coal mines. Missouri University of Science and Technology.
[26]. Mulenga, S. (2020). Evaluation of factors affecting rock fragmentation by blasting using interrelations diagram method. Journal of Physical Sciences, Vol 2. No.
[27]. Lilly P.A. (1986). An empirical method of assessing rock mass blastability. Proceedings of the Large Open Pit Conference, IMM, Australia, 89–92.
[28]. Cailteux, J.L.H., Kampunzu, A.B., Lerouge, C., Kaputo, A.K. and Milesi, J.P. (2005). Genesis of Sediment-Hosted Stratiform Copper-Cobalt Deposits, Central African Copperbelt. Journal of African Earth Sciences.
[29]. Nabiullah, J., Pingua, B. and Misra, D. (2003). Design of drilling and blasting pattern for optimum fragmentation – A case study. Proceedings of Geomechanics and Ground Control. Allied Publishers, India, p. 98.
[30]. Rorke, A. (2003). BME training module: Pre-splitting. Bulk Mining Explosives, Johannesburg. South Africa. pp. 1–24.
[31]. Kuznetsov, V.M. (1973). The mean diameter of the fragments formed by blasting rock. Soviet Mining Science, 9(2), 144–48.
[32]. Cunningham, C.V.B. (1983). The Kuz-Ram model for prediction of fragmentation from blasting. Proceedings of the 1st International Symposium on Rock Fragmentation by Blasting, Lulea, Sweden, 439–453.
[33]. Hjelmberg, H. (1983). Some ideas on how to improve calculations of the fragment size distribution in bench blasting. Proceedings of the 1st International Symposium on Rock Fragmentation by Blasting, Lulea, Sweden, 469–494.
[34]. Otterness, RE., Stagg, M.S., Rholl, S.A. and Smith. N.S. (1991). Correlation of shot design parameters to fragmentation. Proceedings of the 7th Annual Conference of Explosives and Blasting Research, Las Vegas, 179–191.
[35]. Kou, S. and Rustan, P. (1993). Computerized design and result prediction of bench blasting. Proceedings of 4th International Symposium on Rock Fragmentation by Blasting, 263-271.
[36]. Lownds, C.M. (1995). Prediction of fragmentation based on distribution of explosives energy. Proceedings of the 11th Annual Conference of Explosives and Blasting Research, Orlando, Florida, USA, 286–296.
[37]. Aler, J., Du Mouza, J. and Arnould. M. (1996). Evaluation of blast fragmentation efficiency and its prediction by multivariate analysis procedures. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 33: 189–96.
[38]. Morin, M.A. and Ficarazzo, F. (2006). Monte carlo simulation as a tool to predict blasting fragmentation based on the Kuz-Ram model, Computers and Geotechnics, 32, 352–369.
[39]. Ouchterlony, F. (2005). The Swebrec© function: linking fragmentation by blasting and crushing, Mininig Technology, 114, 29–44.
[40]. Gheibie S., Aghababaei, H., Hoseinie, S.H. and Pourrahimian, Y. (2009). Modified Kuz-Ram fragmentation model and its use at the Sungun Copper Mine, International Journal of Rock Mechanics and Mining Sciences, 46, 967–973.
[41]. Gheibie S. and Aghababaei, H. (2010). Kuznetsov model’s efficiency in estimation of mean fragment size at the Sungun copper mine. Proceeding of 9th International Symposium on Rock Fragmentation by Blasting, 265–270.
[42]. Monjezi, M., Rezaei, M. and Yazdian Varjani, A. (2009). Prediction of Rock Fragmentation due to Blasting in Gol-E-Gohar Iron Mine Using Fuzzy Logic.” International Journal of Rock Mechanics and Mining Sciences 46(8): 1273–1280 1273–1280. doi:10.1016/j.ijrmms.2009.05.005.
[43]. Kulatilake, P.H.S.W., Qiong, W., Hudaverdi, T. and Kuzu, C. (2010). Mean particle size prediction in rock blast fragmentation using neural networks. Engineering Geology 114(3–4): 298–311.
[44]. Chakraborty, A.K., Raina, A.K., Ramulu, M., Choudhury, P.B., Haldar, A., Sahu, P. and Bandopadhyay, C. (2004). Parametric study to develop guidelines for blast fragmentation improvement in jointed and massive formations. Engineering Geology 73(1–2): 105–16.
[45]. Hudaverdi, T., Kulatilake, P. and Kuzu, C. (2011). Prediction of blast fragmentation using multivariate analysis procedures. International Journal for Numerical and Analytical Methods in Geomechanics 35: 1318–1333.
[46]. Faramarzi, F., Mansouri, H. and Ebrahimi Farsangi, M.A. (2013). A rock engineering systems based model to predict rock fragmentation by blasting. International Journal of Rock Mechanics and Mining Sciences 60: 82–94.
[47]. Akbari, M., Lashkaripour, G., Yarahamdi Bafghi, A. and Ghafoori, M. (2015). Blastability evaluation for rock mass fragmentation in Iran central iron ore mines. International Journal of Mining Science and Technology, 1–8.
[48]. Kim, V.J. and Kemeny, J. (2011). Site specific blasting model for mine-to-mill optimization. Proceedings of SME Annual Meeting and Exhibit and CMA 113th National Western Mining Conference, 619-623.
[49]. Shad, H.I.A., Sereshki, F., Ataei, M., Karamoozian, M. (2018). Investigation of rock blast fragmentation based on specific explosive Energy and In-Situ Block Size. International Journal of Mining and Geo-Engineering 52-1: 1-6. | ||
|
آمار تعداد مشاهده مقاله: 647 تعداد دریافت فایل اصل مقاله: 1,861 |
||