Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms | ||
| Journal of Mining and Environment | ||
| مقاله 20، دوره 10، شماره 2، تیر 2019، صفحه 543-557 اصل مقاله (4.1 M) | ||
| نوع مقاله: Case Study | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2018.6750.1496 | ||
| نویسندگان | ||
| A.R. Dormishi1؛ M. Ataei1؛ R. Khaloo Kakaie1؛ R. Mikaeil2؛ S. Shaffiee Haghshenas* 3 | ||
| 1Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran | ||
| 2Department of Mining and Metallurgical Engineering, Urmia University of Technology, Urmia, Iran | ||
| 3Young Researchers and Elite Club, Rasht Branch, Islamic Azad University, Rasht, Iran | ||
| چکیده | ||
| One of the most significant and effective criteria in the process of cutting dimensional rocks using the gang saw is the maximum energy consumption rate of the machine, and its accurate prediction and estimation can help designers and owners of this industry to achieve an optimal and economic process. In the present research work, it is attempted to study and provide models for predicting the maximum energy consumption of the gang saw during the process of soft dimensional rocks with the help of an intelligent optimization model such as random non-linear techniques, i.e. the Hybrid ANFIS-DE and Hybrid ANFIS-PSO algorithms based upon 4 physical and mechanical parameters including uniaxial compressive strength, Mohs hardness, Schimazek’s F-abrasiveness factors, Young modulus, and an operational characteristic of the machine, i.e. production rate. During this research work, 120 samples are tested on 12 carbonate rocks. The maximum energy consumption of the cutting machine during this work is measured and used as a modeling output for evaluating the performance of cutting machine. Also meta-heuristic algorithms including DE and PSO algorithms are used for training the Adaptive Neural Fuzzy Inference System (ANFIS). In addition, the PSO algorithm has a higher ability in terms of model output and performance indices and has a superiority over the differential evolution algorithm. Furthermore, comparison between the measured datasets with the ANFIS-DE and ANFIS-PSO models indicate the accuracy and ability of the ANFIS-PSO model in predicting the performance of gang saw considering the machine’s properties and the cut rock. | ||
| کلیدواژهها | ||
| Gang Saw؛ Maximum Energy Consumption (MEC)؛ Cutting Rate؛ ANFIS-DE؛ ANFIS-PSO | ||
|
آمار تعداد مشاهده مقاله: 2,121 تعداد دریافت فایل اصل مقاله: 1,364 |
||