[1]  Hou W, Zhu F, Lu G, Fang DN (2010) Ballistic impact experiments of metallic sandwich panels with aluminium foam core. Int J Impact Eng 37(10): 1045-1055.

[2]  Ashby MF, Evans T, Fleck NA, Hutchinson J, Wadley H, Gibson L (2000) Metal foams: a design guide. Elsevier.

[3]  Guruprasad S, Mukherjee A (2000) Layered sacrificial claddings under blast loading Part I—analytical studies. Int J Impact Eng 24(9): 957-973.

[4]  Guruprasad S, Mukherjee A (2000) Layered sacrificial claddings under blast loading Part II—experimental studies. Int J Impact Eng 24(9): 975-984.

[5]  Hanssen A, Enstock L, Langseth M (2002) Close-range blast loading of aluminium foam panels. Int J Impact Eng 27(6):  593-618.

[6]  Ma G, Ye Z (2007) Energy absorption of double-layer foam cladding for blast alleviation. Int J Impact Eng 34(2):  329-347.

[7]  Karagiozova D, Nurick G, Langdon G, Yuen SCK, Chi Y, Bartle S (2009) Response of flexible sandwich-type panels to blast loading. Compos Sci Technol 69(6): 754-763.

[8]  Shen J, Lu G, Wang Z, Zhao L (2010) Experiments on curved sandwich panels under blast loading. Int J Impact Eng 37(9): 960-970.

[9]  Theobald M, Langdon G, Nurick G, Pillay S, Heyns A, Merrett R (2010) Large inelastic response of unbonded metallic foam and honeycomb core sandwich panels to blast loading. Compos Struct 92(10): 2465-2475.

[10] Yazici M, Wright J, Bertin D, Shukla A (2014) Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading. Compos Struct 110: 98-109.

[11] Qi C, Remennikov A, Pei LZ, Yang S, Yu ZH, Ngo TD (2017) Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: experimental tests and numerical simulations. Compos Struct 180: 161-178.

[12] Doğru M, Güzelbey İ (2018) Investigation of the impact effects of thermoplastic polyurethane reinforced with multi-walled carbon nanotube for soldier boot under the blast load. J Thermoplast Compos 0892705717734599.

[13] Bahei-El-Din YA, Dvorak GJ (2007) Behavior of sandwich plates reinforced with polyurethane/polyurea interlayers under blast loads. J Sandw Struct Mater 9(3): 261-281.

[14] Raman SN, Somarathna HCC, Mutalib AA, Badri KH, Taha MR (2018) Bio-based polyurethane elastomer for strengthening application of concrete structures under dynamic loadings. International Congress on Polymers in Concrete 751-757.

[15] Imbalzano G, Linforth S, Ngo TD, Lee PVS, Tran P (2018) Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs. Compos Struct 183: 242-261.

[16] A. International, Standard Test Method for Compressive Properties of Rigid Plastics. ASTM International, 2010.

[17] Dobratz B (1981) LLNL explosives handbook: properties of chemical explosives and explosives and explosive simulants. Lawrence Livermore National Lab, CA (USA).

[18] AUTODYN. Theory Manual. Century Dynamics (2006).

[19] Fish J, Oskay C, Fan R, Barsoum R (2005) Al 6061-T6-elastomer impact simulations. Electronic Document.

[20] Forouzan MR, Hoseini R (2010) Dynamic Analysis of a Modified Truck Chassis. International Journal of Advanced Design and Manufacturing Technology 3(4): 31-36.

[21] Hoseini R, Salehipoor H (2012) Optimum design process of vibration absorber via imperialist competitive algorithm. Int J Struct Stab Dy 12(03): 1250019.

[22] Hosseini R, Firoozbakhsh K, Naseri H (2014) Optimal design of a vibration absorber for tremor control of arm in Parkinson's disease. Journal of Computational and Applied Research in Mechanical Engineering (JCARME) 3(2): 85-94.

[23] Hosseini R, Hamedi M (2015) Study of the resonant frequency of unimorph triangular V-shaped piezoelectric cantilever energy harvester. International Journal of Advanced Design and Manufacturing Technology 8(4).

[24] Hosseini R, Hamedi M (2016) An investigation into resonant frequency of triangular V-shaped cantilever piezoelectric vibration energy harvester. Journal of Solid Mechanics 8(3): 560-567.

[25] Hosseini R, Hamedi M (2016) Resonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester. Journal of Computational and Applied Research in Mechanical Engineering (JCARME) 6(1): 65-73.

[26] Hosseini R, Hamedi M, Ebrahimi Mamaghani A, Kim HC, Kim J, Dayou J (2017) Parameter identification of partially covered piezoelectric cantilever power scavenger based on the coupled distributed parameter solution. International Journal of Smart and Nano Materials 8(2-3): 110-124.

[27] Hosseini R, Hamedi M, Im J, Kim J, Dayou J (2017) Analytical and experimental investigation of partially covered piezoelectric cantilever energy harvester. Int J Pr Eng Man-Gt 18(3): 415-424.

[28] Hosseini R, Nouri M (2016) Shape design optimization of unimorph piezoelectric cantilever energy harvester. Journal of Computational Applied Mechanics 47(2): 247-259.

[29] Hosseini R, Zargar O, Hamedi M (2018) Improving power density of piezoelectric vibration-based energy scavengers. Journal of Solid Mechanics 10(1): 98-109.

[30] Nejad RM, Marghmaleki IS, Hoseini R, Alaei P (2011) Effects of irreversible different parameters on performance of air standard Otto cycle. J Am Sci 7(3): 248-254.

[31] Salehipour H, Hosseini R, Firoozbakhsh K (2015) Exact 3-D solution for free bending vibration of thick FG plates and homogeneous plate coated by a single FG layer on elastic foundations. Journal of Solid Mechanics 7(1):28-40.

[32] حسینی ر، فاتحی ناراب هـ (1396) بررسی تجربی برداشت انرژی از راه رفتن انسان. مجله علمی پژوهشی مکانیک سازه‌ها و شاره‌ها 181-173 :(4)7.

[33] حسینی ر، ابراهیمی ممقانی ع، نوری م (1396) بررسی تجربی اثر کاهش عرض تیر بر بازده برداشت کننده انرژی ارتعاشی پیزوپلیمری. مجله علمی پژوهشی مکانیک سازه‌ها و شاره‌ها 52-41 :(3)7.   

[34] حسینی ر، فاتحی ناراب هـ (1396) برداشت انرژی ارتعاشی با استفاده از تیر یک‌سردرگیر با دو لایه پیزوالکتریک. مجله علمی پژوهشی مکانیک سازه‌ها و شاره­ها 9-1 :(1)7.