[1] Demir H, Mobedi M, Ülkü S (2008) A review on adsorption heat pump: Problems and solutions. Renew Sust Energ Rev 12: 2381-2403.

[2] Aristov YI (2017) Adsorptive transformation and storage of renewable heat: Review of current trends in adsorption dynamics. Renewable Energy 110: 105-114.

[3] Solmuş İ, Rees DAS, Yamalı C, Baker D (2012) A two-energy equation model for dynamic heat and mass transfer in an adsorbent bed using silica gel/water pair.  Int J Heat Mass Tran 55: 5275-5288.

[4] Solmuş İ, Yamalı C, Yıldırım C, Bilen K (2015) Transient behavior of a cylindrical adsorbent bed during the adsorption process. Appl Energ 142: 115-124.

[5] Niazmand H, Dabzadeh I (2012) Numerical simulation of heat and mass transfer in adsorbent beds with annular fins. Int J Refrig 35: 581-593.

[6] مهدوی خواه م، نیازمند ح (1391) مطالعه عددی میزان اهمیت مقاومت انتقال جرم برون‌ذره‌ای در مدل‌سازی محیط متخلخل بستر چیلرهای جذب سطحی. مجله مهندسی مکانیک مدرس 29-19 :(6)12.   

[7] Golparvar B, Niazmand H (2018) Adsorption cooling systems for heavy trucks A/C applications driven by exhaust and coolant waste heats. Appl Therm Eng 135:158-169.

[8] گل پرور ب، محمدزاده کوثری م، نیازمند ح (1395) بهینه‏ سازی بستر جاذب لوله با فین‌های طولی در سیستم تبرید جذب سطحی با بکارگیری حرارت اتلافی اگزوز. مجله مهندسی مکانیک مدرس 778-767 :(12)16.

[9] Verde M, Harby K, Corberán JM (2017) Optimization of thermal design and geometrical parameters of a flat tube-fin adsorbent bed for automobile air-conditioning. Appl Therm Eng 111: 489-502.

[10] Mohammadzadeh Kowsari M, Niazmand H, Tokarev MM (2017) Bed configuration effects on the finned flat-tube adsorption heat exchanger performance: Numerical modeling and experimental validation. Appl Energ 213:540-554.

[11] Solmuş İ, Yamalı C, Kaftanoğlu B, Baker D, Çağlar A (2010) Adsorption properties of a natural zeolite–water pair for use in adsorption cooling cycles. Appl Energ 87:2062-2067.

[12] Demir H, Mobedi M, Ülkü S (2009) Effects of porosity on heat and mass transfer in a granular adsorbent bed. Int Commun Heat Mass 36: 372-377.

[13] Niazmand H, Talebian H, Mahdavikhah M (2013) Effects of particle diameter on performance improvement of adsorption systems. Appl Therm Eng 59: 243-252.

[14] Waszkiewicz S, Tierney M, Scott HS (2009) Development of coated, annular fins for adsorption chillers. Appl Therm Eng 29: 2222-2227

[15] Demir H, Mobedi M, Ülkü S (2010) The use of metal piece additives to enhance heat transfer rate through an unconsolidated adsorbent bed. Int J Refrig 33:714-720.

[16] Rezk A, Al-Dadah R, Mahmoud S, Elsayed A (2013) Effects of contact resistance and metal additives in finned-tube adsorbent beds on the performance of silica gel/water adsorption chiller. Appl Therm Eng 53:278-284.

[17] Askalany AA, Henninger SK, Ghazy M, Saha BB (2017) Effect of improving thermal conductivity of the adsorbent on performance of adsorption cooling system. Appl Therm Eng 110: 695-702.

[18] آذرفر م، نیازمند ح، طالبیان هـ (1393) شبیه سازی عددی تأثیر افزایش انتقال حرارت در بستر جاذب بر عملکرد سیستم جذب سطحی. مجله مهندسی مکانیک مدرس 112-103 :(8)14.

[19] Aristov YI (2012) Adsorptive transformation of heat: principles of construction of adsorbents database. Appl Therm Eng 42: 18-24.

[20] Sircar S, Hufton J (2000) Why does the linear driving force model for adsorption kinetics work?. Adsorption  6:137-147.

[21] Mahdavikhah M, Niazmand H (2013) Effects of plate finned heat exchanger parameters on the adsorption chiller performance. Appl Therm Eng 50: 939-949.

[22] Tokarev M, Okunev B, Safonov M, Kheifets L, Y. Aristov I (2005) Approximation equations for describing the sorption equilibrium between water vapor and a CaCl2-in-silica gel composite sorbent. Russ J Phys Ch 79:1490-1493.

[23] Nield DA, Bejan A (2012) Convection in Porous Media. Springer Science & Business Media.

[24] Bird RB, Stewart WE, Lightfoot EN (2002) Transport phenomena. 2nd. New York.

[25] محمدزاده کوثری م (1395) مدل‌سازی عددی و بررسی مشخصات ساختاری بستر جاذب با مبدل صفحه-تخت در چیلر جذب سطحی. پایان‌نامه کارشناسی ارشد، دانشکده مهندسی دانشگاه فردوسی مشهد.

[26] Rogala Z (2017) Adsorption chiller using flat-tube adsorbers–Performance assessment and optimization. Appl Therm Eng 121: 431-442.

[27] San JY, Hsu HC (2009) Performance of a multi-bed adsorption heat pump using SWS-1L composite adsorbent and water as the working pair. Appl Therm Eng 29: 1606-1613.

[28] Sapienza A, Frazzica A, Freni A, Aristov Y (2018) Adsorptive heat transformation and storage: Thermodynamic and kinetic aspects. In Dynamics of Adsorptive Systems for Heat Transformation 201: 1-18.

[29] Hamilton RL, Crosser O (1962) Thermal conductivity of heterogeneous two-component systems. Ind Eng Chem Fund 1:187-191.

[30] Maxwell JC (1881) A treatise on electricity and magnetism 1. Clarendon press.

[31] Bruggeman VD (1935) Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. Ann Phys-Berlin 416: 636-664.