[1] Dutta A, Srinath S, Chan JE (2012) Gas turbine heat transfer and cooling technology. 2nd edn. CRC press, Taylor and Francis Group.

[2] Han JC (2004) Recent studies in turbine blade cooling. Int J Rotating Mach 10(6): 443-457.

[3] Wagner J, Johnson BV, Graziani RA, Yeh FC (1992) Heat transfer in rotating serpentine passages with trips normal to the flow. J Turbomach 114: 847–857.

[4] Han JC (1984) Heat Transfer and friction in channels with two opposite rib-roughened walls. J Heat Trans-T ASME 106(4): 774.

[5] Choi EY, Choi YD, Lee WS, Chung JT, Kwak JS (2013) Heat transfer augmentation using a rib-dimple compound cooling technique. Appl Therm Eng 51(1): 435-441.

[6] Siw SC, Chyu MK, Alvin MA (2012) Heat transfer enhancement of internal cooling passage with triangular and semi-circular shaped pin-fin arrays. ASME Turbo Expo 2012, GT2012-69266.

[7] Jason K, Karen A (2013) Effects of non-uniform streamwise spacing in low aspect ratio pin fin arrays. ASME Turbo Expo 2013, GT2013-95889.

[8] Bunker R (2004) Latticework (vortex) cooling effectiveness. Part 1: Stationary channel experiments. ASME Turbo Expo 2004, GT-2004-54157.

[9] Acharya S, Zhou F, Lagrone J, Mahmood G, Bunker R (2005) Latticework (Vortex) cooling effectiveness: Rotating channel experiments. J Turbomach 127: 471-478.

[10] Huh M, Lei J, Liu YH, Han JC (2009) High rotation number effects on heat transfer in a rectangular (AR=2:1) two pass channel. ASME Turbo Expo 2009, GT2009-59421.

[11] Fu WL, Wright LM, Han JC (2006) Rotational buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45 degree ribbed walls. J Heat Trans 128(11): 1130-1141.

[12] Tao Z, Yang M, Deng H, Li H, Tian S (2016) Heat transfer study in a rotating ribbed two-pass channel with engine-similar cross section at high rotation number. Appl Therm Eng 106: 681-696.

[13] Li Y, Deng H, Xu G, Lu Q, Tian S (2014) Effect of channel orientation on heat transfer in rotating smooth square U-duct at high rotation number. ASME Turbo Expo 2014, GT2014-25188.

[14] Lei J, Li S, Han JC, Zhang L, Moon HK (2014) Effect of a turning vane on heat transfer in rotating mult pass rectangular smooth channel J Thermophys Heat Tr 28(3): 417-427.

[15] Deng H, Han Y, Tao Z, Li Y, Wang J (2017) Heat transfer in a rotating trailing edge wedge-shaped cooling channel with two inflow forms. Exp Therm Fluid Sci 88: 530-541.

[16] Wang J, Liu J, Wang L, Sundén B, Wang S (2018) Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs. Appl Therm Eng 129: 1369-1381.

[17] Niu Y, Zhang C, Xu G (2018) A modified anisotropic k−ω model for predicting flow and heat transfer in a rotating channel. Int J Heat Mass Tran 123: 1-15. 

[18] Bons J, Kerrebrock J (1999) Complementary velocity and heat transfer measurements in a rotating cooling passage with smooth walls. J Turbomach 121: 651-662.

[19] Faccini B, Carcasci C, Pievarol M (2014) Heat transfer and pressure loss measurements of matrix cooling geometries for gas turbine airfoils. ASME Turbo Expo 2014, GT2014-25384.

[20] Liu J, Hussain S, Wang J, Wang L, Xie G, Sunden B (2018) Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements. Int J Therm Sci 123: 99-116.

[21] Sundén B (2012) Introduction to heat transfer. WIT Press.

[22] Moffat RJ (1988) Describing the uncertainties in experimental results. Exp Therm Fluid Sci 1(1): 3-17.