[1] Ghasemi AR, Hajmohammad MH, Aminoroaya M (2015) Using response surface method and genetic algorithm for optimization of fiber metal laminate stacking sequences subjected to explosion loading. J Energ Mater.

[2] Nurick G, Martin J (1989) Deformation of thin plates subjected to impulsive loading—a review part II: Experimental studies. Int J Impact Eng 8(2): 171-186.

[3] Rajendran R, Lee J (2009) Blast loaded plates. Mar Struct 22(2): 99-127.

[4] Langdon G, Cantwell W, Nurick G (2004) The blast performance of novel fibre-metal laminates. WIT Trans Built Env 73.

[5] Balden V, Nurick G (2005) Numerical simulation of the post-failure motion of steel plates subjected to blast loading. Int J Impact Eng 32(1-4): 14-34.

[6] Langdon G, Nurick G, Lemanski S, Simmons M, Cantwell W, Schleyer G (2007) Failure characterisation of blast-loaded fibre–metal laminate panels based on aluminium and glass–fibre reinforced polypropylene. Compos Sci Technol 67(7): 1385-1405.

[7] Langdon G, Lemanski S, Nurick G, Simmons M, Cantwell W, Schleyer G (2007) Behaviour of fibre–metal laminates subjected to localised blast loading: Part I—Experimental observations. Int J Impact Eng 34(7): 1202-1222.

[8] Lemanski S, Nurick G, Langdon G, Simmons M, Cantwell W, Schleyer G (2007) Behaviour of fibre metal laminates subjected to localised blast loading—Part II: Quantitative analysis. Int J Impact Eng 34(7): 1223-1245.

[9] Langdon G, Rowe L (2009) The response of steel-based fibre-metal laminates to localised blast loading. in Proceedings of 17th international conference on composite materials, Edinburgh 27-31.

[10] Gharababaei H, Darvizeh A, Darvizeh M (2010) Analytical and experimental studies for deformation of circular plates subjected to blast loading. J Mech Sci Technol 24(9): 1855-1864.

[11] Zamani J, Shariati H, Gamsari A, Sheykhi A (2011) Effect of strain rate on the circular plate under dynamic loading by introducing a dynamic rather than static failure. J Energ Mater 10(2).

[12] Zamani J, Safari K, Khalili (2006) A theoretical and empirical analysis of the plastic square plates under explosive loading uniformly. presented at the Annual International Conference on Mechanical Engineering.

[13] Alderliesten R, Rans C, Benedictus R (2008) The applicability of magnesium based Fibre Metal Laminates in aerospace structures. Compos Sci Technol 68(14): 2983-2993.

[14] Nguyen T, Tran M (2011) Response of vertical wall structures under blast loading by dynamic analysis. Procedia Engineer 14: 3308-3316.

[15] Sabouri H, Ahmadi H, Liaghata GH (2011) Ballistic impact perforation into GLARE targets: Experiment, numerical modelling and investigation of aluminium stacking sequence. IJVSS 3(3).

[16] Kumar P, Shukla A (2011) Dynamic response of glass panels subjected to shock loading. J Non-Cryst Solids 357(24): 3917-3923.

[17] Sadighi M, Alderliesten R, Benedictus R (2012) Impact resistance of fiber-metal laminates: A review. Int J Impact Eng 49: 77-90.

[18] Ahmadi H, Liaghat G, Sabouri H, Bidkhouri E (2013) Investigation on the high velocity impact properties of glass-reinforced fiber metal laminates. J Compos Mater 47(13): 1605-1615.

[19] Langdon GS, von Klemperer C, Volschenk G, van Tonder T, Govender R (2018) The influence of interfacial bonding on the response of lightweight aluminium and glass fibre metal laminate panels subjected to air-blast loading. P I Mech Eng C-J Mec 232(8): 1402-1417.

[20] خدارحمی ح (1394) مکانیک ضربه و انفجار. دانشگاه جامع امام حسین(ع) انتشارات 147.

[21] Moshksar M, Mansorzadeh S (2003) Determination of the forming limit diagram for Al 3105 sheet. J Mater Process Tech 141(1): 138-142.

[22] Deilami Azodi H, Darabi R (2017) Theoretical, Numerical and Experimental Investigation on Formability of Al3105-St14 Two-Layer Sheet. Journal of Solid Mechanics 9(2): 434-444.

[23] شکیب س م م (1392) مکانیک سازه‌های مرکب. دانشگاه جامع امام حسین (ع) انتشارات 380.

[24] Vo T, Guan Z, Cantwell W, Schleyer G (2012) Low-impulse blast behaviour of fibre-metal laminates. Compos Struct 94(3): 954-965.

[25] Forouzan MR, Hoseini R (2010) Dynamic Analysis of a Modified Truck Chassis. International Journal of Advanced Design and Manufacturing Technology 3(4): 31-36.

[26] Hoseini R, Salehipoor H (2012) Optimum design process of vibration absorber via imperialist competitive algorithm. Int J Struct Stab Dy 12(03): 1250019.

[27] Hosseini R, Firoozbakhsh K, Naseri H (2014) Optimal design of a vibration absorber for tremor control of arm in Parkinson's disease. JCARME 3(2): 85-94.

[28] Hosseini R, Hamedi M (2015) Study of the resonant frequency of unimorph triangular V-shaped piezoelectric cantilever energy harvester. International Journal of Advanced Design and Manufacturing Technology 8(4).

[29] Hosseini R, Hamedi M (2016) An investigation into resonant frequency of triangular V-shaped cantilever piezoelectric vibration energy harvester. Journal of Solid Mechanics 8(3): 560-567.

[30] Hosseini R, Hamedi M (2016) Resonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester. JCARME 6(1): 65-73.

[31] Hosseini R, Hamedi M, Ebrahimi Mamaghani A, Kim HC, Kim J, Dayou J (2017) Parameter identification of partially covered piezoelectric cantilever power scavenger based on the coupled distributed parameter solution. International Journal of Smart and Nano Materials 8(2-3): 110-124.

[32] Hosseini R, Hamedi M, Im J, Kim J, Dayou J (2017) Analytical and experimental investigation of partially covered piezoelectric cantilever energy harvester. Int J Precis Eng Man 18(3): 415-424.

[33] Hosseini R, Nouri M (2016) Shape design optimization of unimorph piezoelectric cantilever energy harvester. Journal of Computational Applied Mechanics 47(2): 247-259.

[34] Hosseini R, Zargar O, Hamedi M (2018) Improving Power Density of Piezoelectric Vibration-Based Energy Scavengers. Journal of Solid Mechanics 10(1): 98-109.

[35] Nejad RM, Marghmaleki IS, Hoseini R, Alaei P (2011) Effects of irreversible different parameters on performance of air standard Otto cycle. J Am Sci 7(3): 248-254.

[36] Salehipour H, Hosseini R, Firoozbakhsh K (2015) Exact 3-D solution for free bending vibration of thick FG plates and homogeneous plate coated by a single FG layer on elastic foundations Journal of Solid Mechanics 7(1):28-40.

[37] حسینی ر،  فاتحی ناراب هـ (1396) بررسی تجربی برداشت انرژی از راه رفتن انسان. مجله علمی پژوهشی مکانیک سازه‌ها و شاره‌ها 181-173 :(4)7.

[38] حسینی ر، ابراهیمی ممقانی ع، نوری م (1396) بررسی تجربی اثر کاهش عرض تیر بر بازده برداشت کننده انرژی ارتعاشی پیزوپلیمری. مجله علمی پژوهشی مکانیک سازه‌ها و شاره‌ها 51-41 :(3)7.

[39] حسینی ر، فاتحی ناراب هـ (1396) برداشت انرژی ارتعاشی با استفاده از تیر یک‌سردرگیر با دو لایه پیزوالکتریک. مجله علمی پژوهشی مکانیک سازه‌ها و شاره‌ها 9-1 :(1)7.