[1]  Suresh S, Mortensen A (1998) Functionally Graded Materials. London. UK IOM Communication Limited.

[2] Bhatnagar RM (2013) Modeling, validation and design of autofrettage and compound cylinder. Eur J Mech A-Solid 39: 17-25.

[3] Trieb F, Poelzl J (2005) Autofrettage – basic information and practical application on components for waterjet cutting. WJTA American Waterjet Conference. Houston, Texas, August 21-23.

[4] Abdelsalam OMRY (2012) Analysis and optimization of autofrettaged and shrink-fitted compound cylinders under thermo-mechanical loads. PhD Thesis. Concordia University, Montreal, Quebec Canada.

[5] Grujicic M, Zhang Y (1998) Determination of effective elastic properties of functionally graded materials using voroni cell finite element method. Mater Sci Eng 251: 64-76.

[6] Aboudi J, Pindera M, Arnold SM (1999) Higher-order theory for functionally graded materials. Compos Part B-Eng 30: 777-832.

[7] Franklin GJ, Morrison JLM (1960) Autofrettage of cylinders: Prediction of pressure, external expansion curves and calculation of residual stresses. Proc Inst Mech Eng 174: 947-974.

[8] Chen PCT (1986) Stress and deformation analysis of autofrettaged high pressure vessels. ASME special publication PVP. ASME United Engineering Center, New York.

[9] Stacey A, Webster GA (1988) Determination of residual stress distributions in autofrettaged tubing. Int J Pres Ves Pip 31: 205-220.

[10] Parker AP, Underwood JH (1998) Influence of the bauschinger effect on residual stress and fatigue lifetimes in autofrettaged thick-walled cylinders. Am Soc Test Mater 29: ASTM STP 1321.

[11] Livieri P, Lazzarin P (2002) Autofrettaged cylindrical vessels and bauschinger effect: an analytical frame for evaluating residual stress distributions. J Press Vess-T ASME 124: 38-45.

[12] Bayat Y, Ekhteraei Toussi H (2015) Elastoplastic torsion of hollow FGM circular shaft. Journal of Computational and Applied Research in Mechanical Engineering 4(2): 165-180.

[13] Moulick M, Kumar S (2015) Comparative stress analysis of elliptical and cylindrical pressure vessel with and without Autofrettage consideration using finite element method. Int J Adv Eng Res Stud E-ISSN2249–8974.

[14] Kalali AT, Hadidi-Moud S (2013) A semi-analytical approach to elastic-plastic stress analysis of FGM pressure vessels. Journal of Solid Mechanics 5: 163-173.

[15] Wilkins ML (1980) Use of artificial viscosity in multi-dimensional fluid dynamic calculations. Journal of Computational Physics. Vol. 36, pp. 281-303, 1980.

[16] Caramana EJ, Shashko MJ (1998) Elimination of artificial grid distortion and hourglass-type motion by means of lagrangian subzonal masses and pressure. J Comput Phys 142: 142-521.

[17] ABAQUS 6.14 user  manual,  Dassault Systemes, 2014.