[1] Florence AL, Ahrens T (1967) Interaction of projectiles and composite armor. Stanford Res Inst Menlo Park.

[2] Tate A (1967) A theory for the deceleration of long rods after impact. J Mech Phys Solids 15: 387-399.

[3] Wilkins ML (1978) Mechanics of penetration and perforation. Int J Eng Sci 16: 793-807.

[4] Backman ME, Goldsmith W (1978) The mechanics of penetration of projectiles into targets. Int J Eng Sci 16(1): 1-100.

[5] Rosenberg Z, Yeshurun Y (1988) The relation between ballistic efficiency and compressive strength of ceramic tiles. Int J Impact Eng 7: 357-362.

[6] Woodward RL (1990) A simple one-dimensional approach to modelling   ceramic   composite   armour   defeat.  Int J Impact Eng 9: 455-474.

[7] Reijer PC (1991) Impact on ceramic faced armour PhD thesis, Technical University Delft, Delft, The Netherlands.

[8] Zaera R, Sánchez-Gálvez V (1998) Analytical modelling of normal and oblique ballistic impact on ceramic/metal lightweight armours. Int J Impact Eng 21: 133-148.

[9] Benloulo IC, Sanchez-Galvez V (1998) A new analytical model to simulate impact onto ceramic/composite armors. Int J Impact Eng 21: 461-471.

[10] Fellows N, Barton P (1999) "Development of impact model for ceramic-faced semi-infinite armour. Int J Impact Eng 22: 793-811.

[11] Hohler V, Weber K, Tham R, James B, Barker A, Pickup I (2001) Comparative analysis of oblique impact on ceramic composite systems. Int J Impact Eng 26: 333-344.

[12] Fawaz Z, Zheng W, Behdinan K (2004) Numerical simulation of normal and oblique ballistic impact on ceramic composite armours. Compos Struct 63: 387-395.

[13] Rosenberg Z, Shuach YA, Dekel E (2007) More on the ricochet of eroding long rods-Validating the analytical model with 3D simulations. Int J Impact Eng 34: 942-957.

[14] Shokrieh M, Javadpour G (2008) Penetration analysis of a projectile in ceramic composite armor. Compos Struct 82: 269-276.

[15] khodadadi a, liaghat g, akbari ma, and tahmasebiabdar m (2014) Numerical and experimental analysis of penetration into Kevlar fabrics and investigation of the effective factors on the ballistic performance. Modares Mechanical Engineering 13: 124-133. (In Persian)

[16] Liaghat G, Shanazari H, Tahmasebi M, Aboutorabi A, and Hadavinia H (2013) A modified analytical model for analysis of perforation of projectile into ceramic composite targets. J Compos Mater 3: 17-22.

[17] Nouri MD, Hatami H, Jahromi AG (2015) Experimental and numerical investigation of expanded metal tube absorber under axial impact loading. Struct Eng Mech 54 (6): 1245-1266.

[18] Hatami H, Nouri MD (2015) Experimental and numerical investigation of lattice-walled cylindrical shell under low axial impact velocities. Lat Am J Solids Stru 12 (10): 1950-1971.

[19] Shanazari H, Lighat GH, Feli S (2016) Analysis of penetration process in hybrid ceramic /nanocomposite targets. Modares Mechanical Engineering 16: 137-146. (In Persian)

[20] Babaei H, Jamali A, Mostofi TM, Talesh SH (2016) Experimental study and mathematical modeling of deformation of rectangular plates under impact load. Journal of Solid and Fluid Mechanics 6 (1): 143-152. (In Persian)

[21] Babaei H, Mostofi TM, Alitavoli M (2017) Experimental and analytical investigation into large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile. Thin Walled Struct 107: 257-265.

[22] Mostofi TM, Babaei H, Alitavoli M, Hosseinzadeh S (2017) On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile. Thin Walled Struct 112: 118-24.

[23] Hatami H, Shokri Rad M, Ghodsbin Jahromi A (2017) theoretical analysis of the energy absorption response of expanded metal tubes under impact loads. Int J Impact Eng 109: 224-239.

[24] Ghodsbin Jahromi A, Hatami H (2017) Energy absorption performance on multilayer expanded metal tubes under axial impact. Thin Walled Struct 116: 1-11.

[25] Najafi M, Hosseini SH, Joudaki J (2018) Penetration of Armored Piercing Projectile into Ultra-High Strength Steel Targets: Numerical and Experimental Investigation. Journal of Solid and Fluid Mechanics 8 (2): 81-92. (In Persian)

[26] Hatami H, Hosseini M, Yasuri AK (2019) Perforation of Thin Aluminum Targets Under Hypervelocity Impact of Aluminum Spherical Projectiles. Mater Eval 77 (3): 411-422.

[27] Bless SJ, Rosenberg Z, Yoon B (1987) Hypervelocity penetration of ceramics. Int J Impact Eng 5: 165-171.