Numerical Investigation of Gas Channel Geometry of Proton Exchange Membrane Fuel Cell | ||
| Renewable Energy Research and Applications | ||
| مقاله 10، دوره 1، شماره 1، فروردین 2020، صفحه 93-114 اصل مقاله (2.77 M) | ||
| نوع مقاله: Original Article | ||
| شناسه دیجیتال (DOI): 10.22044/rera.2020.9182.1021 | ||
| نویسندگان | ||
| Haleh Sadeghi* 1؛ I. Mirzaee1؛ Sh. Khalilarya1؛ N. Ahmadi2 | ||
| 1Faculty of mechanical engineering, Urmia university, Urmia, Iran. | ||
| 2Faculty of mechanical engineering, Urmia university of technology, Urmia, Iran. | ||
| چکیده | ||
| In present research, a three-dimensional, single phase proton-exchange membrane fuel cell has been simulated numerically. The governing equations have been solved using finite volume scheme and the obtained results have been validated against famous published data which showed proper conformity. The basic target is an investigation of the gas channel shape effect on cell performance and mass transport phenomenon. First, the besides walls of gas channels have been converted from straight condition to sinusoidal form with two different steps and in continue, the membrane electrode assembly has been bended in four states, but the gas channel cross section area has been kept 1 mm2. The results revealed that, the spiral models because of curved construction, prepare the long pathway for incoming gases and also much mass diffusion to the reaction area. So for model M1, the produced current density for V=0.6 [V], increased about 7.5% and consequently more oxygen and hydrogen consumed. The pressure drop of spiral models has been studied and results showed that the base model has the less pressure drop but model M2 because of higher performance and nearly same pressure drop can be a best choice for user. Also, for new bended models, the best choice is a model with δ=0.4, which has produced more current density, while its reaction area is about 19.64 mm2 larger than the conventional model with δ=0. | ||
| کلیدواژهها | ||
| Geometrical configuration؛ PEM Fuel Cell؛ Gas Channel؛ Species Distribution؛ Membrane electrode assembly | ||
| مراجع | ||
|
[1] Kreuer, K.D., editor, “Fuel cells”, Springer, New York, (2013). https://doi.org/10.1007/978-1-4614-5785-5.
[2] Sajjad Rezazadeh, Iraj Mirzaee, Nader Pourmahmoud, Nima Ahmadi “Three Dimensional Computational Fluid Dynamics Analysis of a Proton Exchange Membrane Fuel Cell”. Journal of Renewable Energy and Environment., Vol. 1, No. 1, (2014),30-42.
[3] N. Ahmadi, S. Rezazadeh, A. Dadvand, I. Mirzaee “Numerical Investigation of the Effect of Gas Diffusion Layer with Semicircular prominences on Polymer Exchange Membrane Fuel Cell Performance and Species Distribution”. Journal of Renewable Energy and Environment., Vol. 2, No. 2, (2015),36-46.
[4] Nima Ahmadi1, Abdolrahman Dadvand, Iraj Mirzaei, Sajad Rezazadeh. “Modeling of polymer electrolyte membrane fuel cell with circular and elliptical cross‐section gas channels: A novel procedure”. International Journal of Energy research., Vol. 42, No. 8, (2018), 2805-2822. https://doi.org/10.1002/er.4069.
[5] Zhuqian Zhang, Wei Liu, Yulei Wang, “Three dimensional two-phase and non-isothermal numerical simulation of multi-channels PEMFC”, International journal of hydrogen energy, Vol. 44, (2018), 379–388. https://doi.org/10.1016/j.ijhydene.2018.05.149.
[6] Dutta, S., Shimpalee, S., Van Zee, JW. “Three-dimensional numerical simulation of straight channel PEM fuel cells”, Journal of Applied Electrochemical, Vol. 30, (2000), 135–146. https://doi.org/10.1023/a:1003964201327.
[7] Chin T-san Wang., “A modified serpentine flow slab for in Proton Exchange Membrane Fuel Cells”, Journal of Energy Procedia, Vol. 142, (2017), 667-673. https://doi.org/10.1016/j.egypro.2017.12.110.
[8] Tae-Hyun Yang, Gu-gon Park, Perumal Pugazhendhi, Won-Yong Lee, Chang Soo Kim, “Performance Improvement of Electrode for Polymer Electrolyte Membrane Fuel Cell”, Korean journal of Chemical Engineering, Vol. 19, No. 3, (2002), 417-420. https://doi.org/10.1007/bf02697149.
[9] Akbar Mohammadi-Ahmar , Behzad Osanloo, Ali Solati , Jalal Ghasemi., “performance improvement of the circular tubular PEMFC by using different architectures and number of layers”, Energy conversion and management, Vol. 128, (2016), 238-249. http://dx.doi.org/10.1016/j.enconman.2016.09.074.
[10] Carral, Ch., Mélé, P., “A Numerical Analysis of PEMFC Stack Assembly Through a 3D Finite Element Model”, International Journal of Hydrogen Energy, Vol. 39, No. 9, (2014), 4516-4530. https://doi.org/10.1016/j.ijhydene.2014.01.036.
[11] Ahmadi N., Rostami S, “Enhancing the performance of polymer electrolyte membrane fuel cell
by optimizing the operating parameter”, Journal of Brazilian Society of Mechanical Science and Engineering, (2019). https://doi.org/10.1007/s40430-019-1720-0.
[12] Rezazadeh, S., Ahmadi, N., “Numerical investigation of Gas Channel Shape Effect on Proton Exchange Membrane Fuel Cell Performance”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2014). https://doi.org/10.1007/s40430-014-0209-0.
[13] Ticianelli, E. A., Derouin, C. R. Redondo, A., Srinivasan, S., “Methods to advance technology of proton exchange membrane fuel cell”, Journal of Electrochemical Society, Vol. 135, No. 9, (1988) 2209-2214. https://doi.org/10.1149/1.2096240.
[14] Ahmadi, N., Pourmahmoud, N., Mirzaee I., and Rezazadeh, S. "Three-dimensional computational fluid dynamic study of effect of different channel and shoulder geometries on cell performance." Australian Journal of Basic and Applied Sciences, Vol. 5, No. 12, (2011), 541-556.
[15] Ahmadi, N., Rezazadeh, S., Mirzaee, I., and Pourmahmoud., N. "Three-dimensional computational fluid dynamic analysis of the conventional PEM fuel cell and investigation of prominent gas diffusion layers effect." Journal of mechanical science and technology, Vol. 26, No. 8, (2012), 2247-2257. https://doi.org/10.1007/s12206-012-0606-1.
[16] Wang, Lin, Attila Husar, Tianhong Zhou, and Hongtan Liu. "A parametric study of PEM fuel cell performances." International Journal of Hydrogen Energy, Vol. 28, No. 11, (2003), 1263-1272. https://doi.org/10.1016/s0360-3199(02)00284-7.
[17] Ahmadi, N., Rezazadeh, S., Mirzaee, I., "Study the effect of various operating parameters of proton exchange membrane." Periodica Polytechnica. Chemical Engineering, Vol. 59, No. 3, (2015), 221-235. https://doi.org/10.3311/ppch.7577.
[18] Ahmadi N., Rezazadeh S., Dadvand A., Mirzaee I., “Modelling of gas transport in proton exchange membrane fuel cells”, ICE, Vol. 170, No. 4, (2017), 163-179. https://doi.org/10.1680/jener.15.00015.
| ||
|
آمار تعداد مشاهده مقاله: 1,380 تعداد دریافت فایل اصل مقاله: 477 |
||