Sensitivity Analysis of Stress and Cracking in Rock Mass Blasting using Numerical Modelling | ||
| Journal of Mining and Environment | ||
| مقاله 15، دوره 11، شماره 4، دی 2020، صفحه 1141-1155 اصل مقاله (6.5 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2020.10033.1939 | ||
| نویسندگان | ||
| M.A. Chamanzad؛ M. Nikkhah* | ||
| Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood university of technology, Shahrood, Iran | ||
| چکیده | ||
| Drilling and blasting have numerous applications in the civil and mining engineering. Due to the two major components of rock masses, namely the intact rock matrix and the discontinuities, their behavior is a complicated process to be analyzed. The purpose of this work is to investigate the effects of the geomechanical and geometrical parameters of rock and discontinuities on the rock mass blasting using the UDEC software. To this end, a 2D distinct element code (DEM) code is used to simulate the stress distribution around three blast holes in some points and propagation of the radial cracks caused by blasting. The critical parameters analyzed for this aim include the normal stiffness (JKN) and shear stiffness (JKS), spacing, angle and persistence of joint, shear and bulk modulus, density of rock, and borehole spacing. The results obtained show that the joint parameters and rock modulus have very significant effects, while the rock density has less a effect on the rock mass blasting. Also the stress level has a direct relationship with JKN, JKS, bulk modulus, and the shear modulus has an inverse relationship with the rock density. Moreover, the stress variation in terms of spacing and joint angle indicates sinusoidal and repetitive changes with the place of target point with respect to the blast hole and joint set. Also with a decrease in the JKN and JKS values, the radial cracked and plastic zones around a blast hole show more development. With increase in the joint persistence, the plastic zones decrease around a blast hole. | ||
| کلیدواژهها | ||
| Blasting؛ Distinct element method؛ Numerical modelling؛ discontinuity؛ Rock mass | ||
| مراجع | ||
|
[1]. Cai, J. G. and Zhao, J. (2000). Effects of multiple parallel fractures on apparent attenuation of stress waves in rock masses. International Journal of Rock Mechanics and Mining Sciences. 37 (4). 661-682.
[2]. Jimeno, E.L., Jimino, C.L. and Carcedo, A. (1995). Drilling and blasting of rocks. CRC Press.
[3]. Zhu, F., Dui, G. and Ren, Q. (2011). A continuum model of jointed rock masses based on micromechanics and its integration algorithm. Science China Technological Sciences. 54 (3). 581-590.
[4]. Zhang, Q. B. and Zhao, J. (2014). A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock mechanics and rock engineering. 47 (4). 1411-1478.
[5]. Norouzi Masir, R., Ataei, M. and Mottahedi, A. (2020). Risk assessment of flyrock in surface mines using FFTA-MCDMs combination. Journal of Mining and Environment.
[6]. Sharpe, J.A. (1942). The production of elastic waves by explosion pressures. I. Theory and empirical field observations. Geophysics. 7 (2). 144-154.
[7]. Konya, C.J. and Walter, E.J. (1991). Rock blasting and overbreak control (No. FHWA-HI-92-001; NHI-13211). United States. Federal Highway Administration.
[8]. Koopialipoor, M., Fallah, A., Armaghani, D.J., Azizi, A. and Mohamad, E.T. (2019). Three hybrid intelligent models in estimating flyrock distance resulting from blasting. Engineering with Computers. 35 (1). 243-256.
[9]. Cho, S.H., Nakamura, Y. and Kaneko, K. (2004). Dynamic fracture process analysis of rock subjected to stress wave and gas pressurization. International Journal of Rock Mechanics and Mining Sciences. 41. 433-440.
[10]. R.L. Ash, “Mechanics of rock breakage; material properties, powder factor, blasting costs,” Pit Quarr. 1963), pp. 109–111, 1963.
[11]. Drukovanyi, M.F., Komir, V.M., Myachina, N.I., Rodak, S.N. and Semenyuk, E.A. (1973). Effect of the charge diameter and type of explosive on the size of the overcrushing zone during an explosion. Soviet Mining. 9 (5). 500-506.
[12]. Vovk, A. A., Mikhalyuk, A. V. and Belinskii, I.V. (1973). Development of fracture zones in rocks during camouflet blasting. Soviet Mining. 9 (4). 383-387.
[13]. Szuladzinski, G. (1993). Response of rock medium to explosive borehole pressure. In International symposium on rock fragmentation by blasting (pp. 17-23).
[14]. Kanchibotla, S.S., Valery, W. and Morrell, S. (1999, November). Modelling fines in blast fragmentation and its impact on crushing and grinding. In Explo ‘99–A conference on rock breaking, The Australasian Institute of Mining and Metallurgy, Kalgoorlie, Australia (pp. 137-144).
[15]. Esen, S., Onederra, I. and Bilgin, H.A. (2003). Modelling the size of the crushed zone around a blasthole. International Journal of Rock Mechanics and Mining Sciences. 40 (4). 485-495.
[16]. Iverson, S.R., Hustrulid, W.A., Johnson, J.C., Tesarik, D. and Akbarzadeh, Y. (2009, September). The extent of blast damage from a fully coupled explosive charge. In Proceedings of the 9th International Symposium on Rock Fragmentation by Blasting, Fragblast (Vol. 9, pp. 459-68).
[17]. Siamaki, A. and Bakhshandeh Amnieh, H. (2016). Numerical analysis of energy transmission through discontinuities and fillings in Kangir Dam. Journal of Mining and Environment. 7 (2). 251-259.
[18]. Ma, G.W. and An, X.M. (2008). Numerical simulation of blasting-induced rock fractures. International Journal of Rock Mechanics and Mining Sciences. 45 (6). 966-975.
[19]. Cundall, P.A. (1990). Numerical modelling of jointed and faulted rock. In International conference on mechanics of jointed and faulted rock (pp. 11-18).
[20]. Sharafisafa, M., Aliabadian, Z., Alizadeh, R. and Mortazavi, A. (2014). Distinct element modelling of fracture plan control in continuum and jointed rock mass in presplitting method of surface mining. International Journal of Mining Science and Technology. 24 (6). 871-881.
[21]. Kulatilake, P.H., Shreedharan, S., Sherizadeh, T., Shu, B., Xing, Y. and He, P. (2016). Laboratory estimation of rock joint stiffness and frictional parameters. Geotechnical and Geological Engineering. 34 (6). 1723-1735.
[22]. Wang, Z.L. and Konietzky, H. (2009). Modelling of blast-induced fractures in jointed rock masses. Engineering Fracture Mechanics. 76 (12). 1945-1955.
[23]. Wang, Z.L., Li, Y.C. and Wang, J.G. (2008). Numerical analysis of blast-induced wave propagation and spalling damage in a rock plate. International Journal of Rock Mechanics and Mining Sciences. 45 (4). 600-608.
[24]. Wang, Z. L., Li, Y. C., & Shen, R. F. (2007). Numerical simulation of tensile damage and blast crater in brittle rock due to underground explosion. International Journal of Rock Mechanics and Mining Sciences. 44 (5). 730-738. | ||
|
آمار تعداد مشاهده مقاله: 468 تعداد دریافت فایل اصل مقاله: 540 |
||