[1] Walsh PJ (2001) Carbon fibers, ASM handbook. Zoltek Corporation. St. Louis.

[2] Morgan P (2005) Carbon fibers and their composites. Taylor & Francis, New York.

[3] Buckley JD, Edie DD (1993) Carbon-Carbon materials and composites. William Andrew Publishing, New York.

[4] Montes-Moran M, Gauthier W, Martinez A, Tascon J (2004) Mechanical properties of high-strength carbon fibers. validation of an end-effect model for describing experimental data. Carbon, 42: 1275–1278.

[5] ISO 11566, Carbon fiber, Determination of the tensile properties of single-filament of specimens.

[6] ASTM D 3379, Standard test method for tensile strength and young’s modulus for high-modulus single-filament materials.

[7] ISO 10618, Carbon fiber, Determination of the tensile properties of resin impregnated yarns.

[8] ASTM D 4018, Standard test methods for properties of continuous filament carbon and graphite fiber tows.

[9] Yu W, Yao J (2006) Tensile strength and its variation of pan-based carbon fibers. I, statistical distribution and volume dependence. J Appl Polym Sci 101(5): 3175–3182.

[10] Yu W, Yao J (2007) Tensile strength and its variation of pan-based carbon fibers. II, calibration of the variation from testing. J Appl Polym Sci 104(4): 2625–2632.

[11] Griffith AA (1921) The Phenomena of Rupture and Flow in Solids. Philos Trans R Soc London, Ser. A 221: 163–198.

[12] Pardini LC, Manhani LGB (2002) Influence of the testing gage length on the strength, young’s modulus and weibull modulus of carbon fibres and glass fibres. Mater Res5(4): 411–420.

[13] Moreton R (1969) The effect of gauge length on the tensile strength of R.A.E. carbon fibres. Fiber Sci Technol 1(4): 273–284.

[14] Barry PW (1987) Experimental data for the longitudinal tensile strength of unidirectional fibrous composites - Part 1: fiber and matrix, Fiber Sci Technol 11(4): 245–255.

[15] Chwastiak S, Barr J, Didchenko R (1979) High strength carbon fibres from mesophase pitch. Carbon 17(1): 49–53.

[16] Westbury MC, Drzal T (1991) J Compos Tech Res 13(1): 22–28.

[17] Donnet JB, Bansal RC (1990) Carbon fibers. 2nd edn., Marcel Dekker, New York.

[18] Tagawa T, Miyata T (1997) Size effect on tensile strength of carbon fibers. Mater Sci and Eng A 238: 336–342.

[19] ISO 11567, Carbon fiber, Determination of filament diameter and cross-sectional area.

[20] ISO 10120, Carbon fiber, Determination of linear density.

[21] ISO 10119, Carbon fiber, Determination of density.

[22] ISO 1889, Reinforcement yarns, Determination of linear density.

[23] ISO 10548, Carbon fiber, Determination of size content.

[24] Morgan P (2005) Carbon fibers and their composites. Taylor & Francis, New York: 85.

[25] Goggin PR, A method of measuring the quality of carbon fibers, AERE R-7790.