[1] Zarei H, Kröger M (2008) Optimum honeycomb filled crash absorber design. Mater Design 29(1): 193-204.

[2] Abramowicz W, Jones N (1984) Dynamic axial crushing of circular tubes. Int J Impact Eng 2(3): 263-281.

[3] Gupta N (1998) Some aspects of axial collapse of cylindrical thin-walled tubes. Thin Wall Struct 32(1-3): 111-126.

[4] Abramowicz W, Jones N (1984) Dynamic axial crushing of square tubes. Int J Impact Eng 2(2): 179-208.

[5] Al Galib D, Limam A (2004) Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes. Thin Wall Struct 42(8): 1103-1137.

[6] Zhang X, Tian Q, Yu T(2009) Axial crushing of circular tubes with buckling initiators. Thin wall struct 47(6-7): 788-797.

[7] Zarei H, Kröger M (2006) Multiobjective crashworthiness optimization of circular aluminum tubes. Thin wall struct 44(3): 301-308.

[8] Alexander J (1960) An approximate analysis of the collapse of thin cylindrical shells under axial loading. Q J Mech Appl Math 13(1): 10-15.

[9] Andrews K, England G, Ghani E (1983) Classification of the axial collapse of cylindrical tubes under quasi-static loading. Int J Mech Sci 25(9-10): 687-696.

[10] Wierzbicki T, Bhat SU, Abramowicz W,  Brodkin D (1992) Alexander revisited—a two folding elements model of progressive crushing of tubes. Int J Solids Struct 29(24): 3269-3288.

[11] Guillow S, Lu G, Grzebieta R (2001) Quasi-static axial compression of thin-walled circular aluminium tubes. Int J Mech Sci 43(9):2103-2123.

[12] Audi RF, Brooks RJ, Cormier JM, Smith DS, Rossi MA (2009) Modular energy absorber with ribbed wall structure, ed: Google Patents.

[13] Ralston DD, Holdren KE, Bastien KR, Gorman D, Kulkarni A (2011) Energy absorber with sidewall stabilizer ribs. ed: Google Patents.

[14] Shahravi S, Rezvani MJ, Jahan A (2019) Multi-response optimization of grooved circular tubes filled with polyurethane foam as energy absorber. Journal of Optimization in Industrial Engineering 12(1): 133-149.

[15] Nia AA, Nejad KF, Badnava H, Farhoudi H (2012) Effects of buckling initiators on mechanical behavior of thin-walled square tubes subjected to oblique loading. Thin wall struct 59: 87-96.

[16] Rezvani MJ, Jahan A (2015) Effect of initiator, design, and material on crashworthiness performance of thin-walled cylindrical tubes: A primary multi-criteria analysis in lightweight design. Thin Wall Struct 96: 169-182.

[17] Mamalis A, Manolakos D, Ioannidis M, Kostazos P, Kastanias S (2003) Numerical modelling of the axial plastic collapse of externally grooved steel thinwalled tubes. Int J Crashworthiness 8(6): 583-590.

[18] Baykasoglu C, Cetin MT (2015) Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading. Int J Crashworthiness 20(1): 95-106.

[19] Li G, Xu F, Sun G, Li Q (2015) A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading. Int J Impact Eng 77: 68-83.

[20] Xu F (2015) Enhancing material efficiency of energy absorbers through graded thickness structures. Thin Wall Struct 97: 250-265.

[21] Erdin ME, Baykasoglu C, Cetin MT (2016) Quasi-static axial crushing behavior of thin-walled circular aluminum tubes with functionally graded thickness. Procedia Engineer 149: 559-565.

[22] Pang T, Kang H, Yan X, Sun G, Li Q (2017) Crashworthiness design of functionally graded structures with variable diameters. Int J Crashworthiness 22(2): 148-162.

[23] Yao S, Xing Y, Zhao K (2017) Crashworthiness analysis and multiobjective optimization for circular tubes with functionally graded thickness under multiple loading angles. Adv Mech Eng 9(4): 1687814017696660.

[24] Yin H, Dai J, Wen G, Tian W, Wu Q (2019) Multi-objective optimization design of functionally graded foam-filled graded-thickness tube under lateral impact. Int J Com Meth-sign 16(1):1850088.

[25] Baykasoğlu C, Baykasoğlu A, Tunay Çetin M (2019) A comparative study on crashworthiness of thin-walled tubes with functionally graded thickness under oblique impact loadings. Int J Crashworthiness 24(4): 453-471.

[26] Li C, Wang D (2019) Knowledge-Based Engineering–based method for containership lashing bridge optimization design and structural improvement with functionally graded thickness plates. P I Mech Eng M-J Eng 233(3):760-778.

[27] Gupta N, Abbas H (2000) Mathematical modeling of axial crushing of cylindrical tubes. Thin Wall Struct 38(4): 355-375.

[28] Hosseinipour S, Daneshi G (2003) Energy absorbtion and mean crushing load of thin-walled grooved tubes under axial compression. Thin wall struct 41(1): 31-46.

[29] Rezvani M, Nouri M D (2015) Analytical model for energy absorption and plastic collapse of thin-walled grooved frusta tubes. Mech Adv Mater Struc 22(5): 338-348.

[30] Rezvani M, Nouri MD (2017) Mathematical modelling of energy absorption in thin-walled grooved conical tubes with considering of strain hardening phenomena. Int J Struc Eng 8(4): 308-326.

[31] Chirwa E (1993) Theoretical analysis of tapered thin-walled metal inverbucktube. In J Mech Sci 35(3-4): 325-351.

[32] Rezvani M, Nouri MD (2014) Axial crumpling of aluminum frusta tubes with induced axisymmetric folding patterns. Arab J Sci Eng 39(3): 2179-2190.

[33] Ghamarian A, Zarei H (2012) Crashworthiness investigation of conical and cylindrical end-capped tubes under quasi-static crash loading. Int J Crashworthiness 17(1): 19-28.

[34] Li G, Xu F, Sun G, Li Q (2015) Crashworthiness study on functionally graded thin-walled structures. Int J Crashworthiness 20(3): 280-300.

[35] Rezvani M, Nouri MD, Rahmani H (2012)  Experimental and numerical investigation of grooves shape on the energy absorption of 6061-T6 aluminium tubes under axial compression. Int J Mater Struc Integrity 6(2-4): 151-168.