[1] Tamasgavabari R, Ebrahimi AR, Abbasi SM, Yazdipour AR (2020) Effect of harmonic vibration during gas metal arc welding of AA-5083 aluminum alloy on the formation and distribution of intermetallic compounds. J Manuf Process 49: 413-422.

[2] Pujari KS, Patil DV, Mewundi G (2018) Selection of GTAW process parameter and optimizing the weld pool geometry for AA 7075-T6 aluminium alloy. Mater Today-Proc 5(11): 25045-25055.

[3] Thomas WM, Nicholas ED, Needham JC, Murch MG, Smith PT, Dawes CJ (1991) Friction stir butt welding. Int. Patent No. PCT/GB92/02203.

[4] Zhao J, Jiang F, Jian HG, Wen K, Jiang L, Chen XB (2010) Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al−Mg−Sc alloy plates. Mater Des 31: 306-311.

[5] Steel RJ, Packer SM, Fleck RD, Sanderson S, Tucker C (2013) Advances in FSW and new applications. Editor: Fujii H, Proceedings of the 1st International Joint Symposium on Joining and Welding, Woodhead Publishing 125-127.

[6] Thomas WM, Nicholas ED (1997) Friction stir welding for the transportation industries. Mater Des 18: 269-273.

[7] Gite RA, Loharkar PK, Shimpi R (2019) Friction stir welding parameters and application: A review. Mater Today-Proc 19(2): 361-365.

[8] Woo W, Balogh L, Ungár T, Choo H, Feng Z (2008) Grain structure and dislocation density measurements in a friction-stir welded aluminum alloy using X-ray peak profile analysis. Mater Sci Eng A 498(1-2): 308-313.

[9] Jata KV, Semiatin SL (2000) Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Scripta Mater 43: 743-749.

[10] Ramanjaneyulu K, Madhusudhan Reddy G, Hina G (2015) Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology. Defence Tech 11(3): 209-219.

[11] Rathinasuriyan C, Sankar R, Avin Ganapathi S, Senthil Kumar VS (2018) Optimization of Welding Parameters for Friction Stir Lap Welding of AA6061-T6 Alloy. Mod Mech Eng 8: 31-41.

[12] Liu HJ, Fujii H, Maeda M, Nogi K (2003) Tensile properties and fracture locations of friction stir welded joints of 6061-T6 aluminum alloy. Mater Sci Lett 22: 1061-1063.

[13] Guo Y, Ma Y, Wang F (2019) Dynamic fracture properties of 2024-T3 and 7075-T6 aluminum friction stir welded joints with different welding parameters. Theor Appl Fract Mec 104: 102372.

[14] Cabibbo M, Mcqueen HJ, Evangelista E, Spigarelli S, Paola MD, Falchero A (2007) Microstructure and mechanical property studies of AA6056 friction stir welded plate. Mater Sci Eng A 460-461: 86-94.

[15] Fratini L, Buffa G, Shivpuri R (2009) In-process heat treatments to improve FS-welded butt joints. Int J Adv Manuf Tech 43: 664.

[16] Sakurada D, Katoh K, Tokisue H (2002) Underwater friction welding of 6061 aluminum alloy. J Jpn Inst Light Met 52 (1): 2-6.

[17] Derazkola HA, Khodabakhshi F (2019) Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel. Int J Adv Manuf Tech 102: 4383-4395.

[18] Rouzbehani R, Kokabi AH, Sabet H, Paidar M, Ojo OO (2018) Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy. J Mater Process Tech 262: 239-256.

[19] Mofid MA, Abdollah-Zadeh A, Ghaini FM, Gur CH (2012) Submerged friction-stir welding (SFSW) underwater and under liquid nitrogen: An improved method to join Al alloys to Mg alloys. Metall Mater Trans A 43: 5106-5114.

[20] Sabari SS, Malarvizhi S, Balasubramanian V, Reddy GM (2016) Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloy. Defence Tech 12: 324-333.

[21] Xua WF, Liu JH, Chen DL, Luan GH, Yao JS (2012) Improvements of strength and ductility in aluminum alloy joints via rapid cooling during friction stir welding. Mater Sci Eng A 548: 89-98.

[22] Liu HJ, Zhang HJ, Huang YX, Lei Y (2010) Mechanical properties of underwater friction stir welded 2219 aluminum alloy. T Nonferr Metal Soc 20: 1387-1391.

[23] Klobcar D, Kosec L, Pietras A, Smolej A (2012) Friction-stir welding of aluminium alloy 5083. Mater Tehnol 46: 483-488.

[24] Darras B, Khraisheh M, Abu-Farha F (2007) Friction stir processing of AZ31 commercial magnesium alloy. J Mater Process Tech 191: 77-81.

[25] Kishta EE, Darras B (2014) Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy. Proc Inst Mech Eng B J Eng Manuf 230(3): 458-465.

[26] Hosseini M, Manesh HD (2010) Immersed friction stir welding of ultrafine grained accumulative roll-bonded al alloy. Mater Des 31: 4786-4791.

[27] Liu HJ, Zhang HJ, Huang YX, Lei Y (2010) Mechanical properties of underwater friction stir welded 2219 aluminum alloy. T Nonferr Metal Soc 20: 1387-1391.

[28] Wang KS, Wu JL, Wang W, Zhou LH, Lin ZX, Kong L (2012) Underwater friction stir welding of ultrafine grained 2017 aluminum alloy. J Cent South Univ 19: 2081-2085.

[29] Zhang HJ, Liu HJ, Yu L (2012) Effect of water cooling on the performances of friction stir welding heat-affected zone. J Mater Eng Perform 21(7): 1182-1187.

[30] De PS, Mishra RS (2011) Friction stir welding     of precipitation strengthened aluminium alloys: scope and challenges. Sci Technol Weld Joi 16: 343-347.

[31] Wang Q, Zhao Z, Zhao Y, Yan K, Liu C, Zhang H (2016) The strengthening mechanism of spray forming Al−Zn−Mg−Cu alloy by underwater friction stir welding. Mater Des 102: 91-99.

[32] Lokesh R, Senthil Kumar VS, Rathinasuriyan C, Sankar R (2015) Optimization of Process Parameters: Tool Pin Profile, Rotational Speed and Welding Speed for Submerged Friction Stir Welding of AA6063 Alloy. Int J Tech Res Appl 12: 35-38.

[33] Rathinasuriyan C, Senthil Kumar VS (2016) Modelling and optimization of submerged friction stir welding parameters for AA6061-T6 alloy using RSM. Kovove Mater 54: 297-304.

[34] Zhang HJ, Liu HJ, Yu L (2011) Microstructure and mechanical properties as a function of rotation speed in underwater friction stir welded aluminum alloy joints. Mater Des 32: 4402-4407.

[35] Liu HJ, Zhang HJ, Yu L (2011) Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy. Mater Des 32(3): 1548-1553.

[36] Zhang Z, Xiao BL, Ma ZY (2014) Influence of water cooling on microstructure and mechanical properties of friction stir welded 2014Al-T6 joints. Mater Sci Eng A 614: 6-15.

[37] Sabari SS, Malarvizhi S, Balasubramanian V, Reddy G (2016) The effect of pin profiles on the microstructure and mechanical properties of underwater friction stir welded AA2519-T87 aluminium alloy. Int J Mech Mater Eng 11(5): 1-14.

[38] Jelokhani-Niaraki MR, Mostafa Arab NB, Naffakh-Moosavy H, Ghoreishi M (2016) The systematic parameter optimization in the Nd:YAG laser beam welding of Inconel 625. Int J Adv Manuf Tech 84(9-12): 2537-2546.

[39] Myers RH, Montgomery DC, Anderson-Cook CM (2016) Response surface methodology: process and product optimization using designed experiments. John Wiley & Sons, ISBN 978-1-118 91601-8.

[40] Vahdati M, Moradi M (2020) Statistical analysis and optimization of the yield strength and hardness of surface composite Al7075/Al₂O₃ produced by FSP via RSM and desirability approach. Iran J Mater Form 7(1): 32-45.

[41] Vahdati M, Moradi M, Shamsborhan M (2020) Modeling and Optimization of the Yield Strength and Tensile Strength of Al7075 Butt Joint Produced by FSW and SFSW Using RSM and Desirability Function Method. T Indian I Metals 73: 2587-2600.

[42] Design Expert software, version 11, http://www.statease.com.

[43] http://www.matweb.com

[44] AMSH6088: Heat Treatment of Aluminum Alloys, SAE International, https://www.sae.org.

[45] Montgomery DC (2017) Design and analysis of experiments. John Wiley & Sons, ISBN 978-1-119-11347-8.

[46] Arbegast WJ (2003) Modeling friction stir joining as a metalworking process. Proc. Hot Def Alum All III: 313-327.

[47] Benavides S, Li Y, Murr LE, Brown D, McClure JC (1999) Low-temperature friction-stir welding of 2024 aluminium. Scripta Mater 41(8): 809-815.

[48] Shanmuga Sundaram N, Murugan N (2010) Tensile behavior of dissimilar friction stir welded joints of aluminium alloys. Mater Des 31(9): 4184-4193.