[1] Overton G, Annderson SG, Belforte DA, Hausken T (2010) Laser marketplace: How wide is the chashm. Laser Focus World 46: 32-49.

[2]. D’Oliveira AS, Silva PS, Vilar R (2002) Microstructural Features of Consecutive Layers of Satellite 6 Deposited By Laser Cladding. Surf Coat Technol 153: 203-209.

[3] Jendrzejewski R, Conde A, Damborenea J, Sliwinski G (2002) Characterisation of the Laser-Clad Stellite Layers for Protective Coatings. Mater Des 23: 83-88.

[4] Vollertsen F, Partes K, Meijer J (2005) State of the art of the laser hardening and cladding. Proc. 3rd  int. WLT. Munich, 281-298.

[5] Khorram A, Davoodi Jamaloei A, Paidar M, Cao X (2019) Laser cladding of Inconel 718 with 75Cr3C2+25(80Ni20Cr) powder: Statistical modeling and optimization. Surf Coat Technol 378: 124933.

[6] Ming Q, Lim LC, Chen ZD (1998)  Laser cladding of nickel-based hardfacing alloys. Surf Coat Technol 106: 174-182.

[7] Bourahima F, Helbert AL, Rege M, Ji V, Solas D, Baudin T (2018) Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: influence of the process parameters on bonding quality and coating geometry. J Alloy Compd 771: 1018-1028

[8] Olakanmia EO, Nyadongo ST, Malikongwa K, Lawal SA, Botes A, Pityana SL (2019) Multi-variable optimisation of the quality characteristics of fiber-laser cladded Inconel-625 composite coatings. Surf Coat Technol 357: 289-303

[9] Kim J, Peng Y (2000) Melt pool shape and dilution of laser cladding with wire feeding. J Mater Process Technol 104(3): 284-293.

[10] Sun Y, Hao M (2012) Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd:YAG laser. Opt Lasers Eng 50(7): 985-995.

[11] Nenadl O, Ocelík V, Palavra A, Hosson JD (2014) The Prediction of Coating Geometry from Main Processing Parameters in Laser Cladding. Phys Procedia  56: 220-227.

[12] Shi Y, Li Y, Liu J, Yuan Z (2018) Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel. Opt Lasers Tech 99: 256-270.

[13] Moazami Goodarzi D, Pekkarinen J, Salminen A (2017) Analysis of laser cladding process parameter influence on the clad bead geometry. Weld World 61: 883-891.

[14] Liu H, Hu Z, Qin X, Wang Y, Zhang J, Huang S (2017) Parameter optimization and experimental study of the sprocket repairing using laser cladding. Int J Adv Manuf Tech 91: 3967-3975.

[15] Moradi M, Ashoori A, Hasanib A (2020) Additive manufacturing of stellite 6 superalloy by direct laser metal deposition – Part 1: Effects of laser power and focal plane position. Opt Lasers Tech 131: 106328

[16] Moradi M, Hasani A, Malekshahi Beiranvand Z, Ashoori A, Additive manufacturing of stellite 6 superalloy by direct laser metal deposition – Part 2: Effects of scanning pattern and laser power reduction in differrent layers. Opt Lasers Tech 131: 106455

[17] Khorram A, Davoodi jamaloei A, jafari A (2019)  Surface transformation hardening of Ti-5Al-2.5Sn alloy by pulsed nd:yag laser: an experimental study. Int J Adv Manuf Tech 100: 3085-3099.