Experimental Study of Effect of Glass Fibres on Properties of Concrete Containing Micro-silica and Limestone Powder | ||
| Journal of Mining and Environment | ||
| مقاله 20، دوره 12، شماره 3، مهر 2021، صفحه 895-906 اصل مقاله (3 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2021.11175.2098 | ||
| نویسندگان | ||
| M. Hosseini* ؛ D. Fakhri | ||
| Faculty of Technical and Engineering, Imam Khomeini International University, Qazvin, Iran | ||
| چکیده | ||
| The purpose of this work is to investigate the possibility of using mine wastes in the improvement of concrete properties. This research work investigates the physical and mechanical properties of the concrete specimens. These concrete specimens include concrete-lacking fibres, micro-silica and limestone powder (C), concrete-containing glass fibres without micro-silica and limestone powder (GC), concrete-containing micro-silica and limestone powder without fibres (CML), and concrete-containing glass fibres, micro-silica, and limestone powder (CGML). The physical and mechanical properties including the effective porosity, longitudinal wave velocity, water absorption, unit weight, tensile strength, uniaxial compressive strength, triaxial compressive strength, cohesion, and internal friction angle are investigated. The results obtained show that adding glass fibres to the concrete (GC) improve its properties compared to the fibre-less concrete (C). However, the properties of GC are improved significantly less than CGML. The Brazilian tensile strength and uniaxial compressive strength of GC increase by 13.6% and 10.95% relative to C. The Brazilian tensile strength and uniaxial compressive strength of CGML increase by 21.8% and 45.94% relative to C. Finally, it can be concluded that adding the micro-silica and limestone powder to the glass fibre concrete as well as the use of mine wastes also significantly improves the properties of the concrete. | ||
| کلیدواژهها | ||
| Concrete؛ Microsilica؛ Limestone powder؛ Glass fibres؛ Physical and mechanical properties | ||
| مراجع | ||
|
[1]. Zhang, J. and Li, Y. (2019). The stability of gob-side entry retaining in a high-gas-risk mine. Advances in Civil Engineering, Article ID 7540749.
[2]. Zhao, H. (2019). State-of-the-art of standing supports for gob-side entry retaining technology in China. Journal of the Southern African Institute of Mining and Metallurgy, 119 (11), 891-906.
[3]. Ghalenoei, M., Khodabakhshian, A., and Asadi Shamsabadi, A. (2018). Effect of marble powder wastes and microsilica as replacement for part of cement on concrete durability, Concrete Studies, 11(2), 35-50 (In Persian).
[4]. Payro, P. (2013). Fibre-reinforced concrete, Farhang-Danesh Publication (In Persian).
[5]. Eqtedari, M. and Ghanbari, A. (2019). Experimental study of the effect of glass fibres on the mechanical strength of concrete in comparison with PP-reinforced concrete, 3rd National Conference on Concrete Surfaces, Tehran, Iranian Concrete Association, Iran University of Science and Technology (In Persian).
[6]. Miloud, B. (2005). Permeability and porosity characteristics of steel fiber reinforced concrete.
[7]. Choi, Y. and Yuan, R. (2005). Experimental relationship between splitting tensile strength and compressive strength of GFRC and PFRC, Cement and Concrete Research, 35, 1587-1591.
[8]. Karahan, O. and Atiş, C.D. (2011). The durability properties of polypropylene fiber reinforced fly ash concrete. Materials and Design, 32(2), 1044-1049.
[9]. Taheri Fard, A.R., Soheili, H., Ramzani Movafagh, S., and Farnood Ahmadi, P. (2016). Combined effect of glass fiber and polypropylene fiber on mechanical properties of self-compacting concrete.
[10]. Hilles, M.M. and Ziara, M.M. (2019). Mechanical behavior of high strength concrete reinforced with glass fiber. Engineering Science and Technology, an International Journal, 22(3), 920-928.
[11]. Hasanzadeh, M., Hasanzadeh, F., Ayron, A., and Moazzami Goodarzi, S. (2009). Mechanical properties of concrete containing micro-silica, 1st National Concrete Conference (October 2009), 1-11(In Persian).
[12]. Singniao, P., Sappakittipakorn, M., and Sukontasukkul, P. (2020, July). Effect of silica fume and limestone powder on mechanical properties of ultra-high performance concrete. In IOP Conference Series: materials Science and Engineering (Vol. 897, No. 1, p. 012009). IOP Publishing.
[13]. Mansoori, A., Moein, M.M., and Mohseni, E. (2021). Effect of micro silica on fiber-reinforced self-compacting composites containing ceramic waste. Journal of Composite Materials, 55(1), 95-107.
[14]. Iranian National Building Code. (2013). 5th Chapter, Building materials and products (In Persian).
[15]. Institute of Standards and Industrial Research of Iran, 2015, Concrete aggregates-properties, Standard No. 302 (In Persian).
[16]. Iran Brush Catalogue, 2018 (In Persian).
[17]. Institute of Standards and Industrial Research of Iran (2013). Mixing room, moist chamber, moist room, and water ponds used in hydraulic testing of cement and concretes, Standard No. 17040 (In Persian).
[18]. ISRM. (1979). Suggested method for determining water content, porosity, density, absorption and related properties, and swelling and slake durability index properties, Int J Rock Mech Min Sci, 16, 141–156.
[19]. ISRM. (1978). Suggested methods for determining sound velocity, Int J Rock Mech Min Sci Geomech Abstr, 15, 53–58.
[20]. ISRM (1978). Suggested methods for determining tensile strength of rock materials, Int J Rock Mech Min Sci Geomech Abstr, 15, 99–103.
[21]. ISRM (1979). Suggested methods for determining the uniaxial compressive strength and deformability of rock materials, Int J Rock Mech Min Sci, 16, 138–140.
[22]. ISRM (1978). Suggested methods for determining the strength of rock materials in triaxial compression, Int J Rock Mech Min Sci Geomech Abstr, 15, 47–51.
[23]. Fahimifar, A. and Soroush, H. (2001). Rock Mechanics Tests, 1st volume, Soil Mechanics and Technical Laboratory Co. Publication, 1st edition (In Persian). | ||
|
آمار تعداد مشاهده مقاله: 659 تعداد دریافت فایل اصل مقاله: 592 |
||