Low-Cost Approaches to Promote Performance of Comminution Circuit at Steel-Sirjan Iron Ore Complex | ||
| Journal of Mining and Environment | ||
| مقاله 12، دوره 12، شماره 4، دی 2021، صفحه 1065-1076 اصل مقاله (9.35 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2021.11143.2094 | ||
| نویسندگان | ||
| S. Zare1؛ M. Maleki Moghaddam* 2؛ J. Pourshaabadi3 | ||
| 1Department of Mining Engineering, Shahid Bahonar University of Kerman, Kerman, Iran | ||
| 2Mineral Processing Group, Vali-e-Asr University of Rafsanjan, Rafsanjan, Iran | ||
| 3Steel-Sirjan Iron Ore Complex, Sirjan, Iran | ||
| چکیده | ||
| The energy consumed by the comminution equipment accounts for the main part of the operating cost of the mineral processing plants. In order to conserve energy, attempts were made to increase the efficiency of the conventional comminution equipment. As a case study, in this research work, a process audit was carried out in the comminution plant of the Steel-Sirjan Iron Ore Complex in order to find the low-cost solutions to improve the product quality and decrease the maintenance and operating costs. Three main steps of the audit were (1) studying the operating manuals and checking the standard process procedures, (2) process data analyzing, and (3) proposing and implementing the proper solutions. Plant audit revealed a low equipment efficiency. The main defects were the crusher operation in the half-full condition, high pressure grinding roll (HPGR) operation in a non-standard condition, high amounts of rejected materials in the HPGR circuit, and low efficiency of the screen. Following this, a series of modifications were made in the crushing and grinding circuit. This consequently caused an increase of 9.3% in the crushing plant throughput in the choked condition of the crushers as opposed to the half-full condition. By increasing the HPGR operational pressure and the hopper level, BBWI of the HPGR product in the super-choked condition was decreased from 16± 0.20 kWh/t to 14.9± 0.25 kWh/t. By modifying the screen process, the circulating load decreased from 79% to 59%, and the screen efficiency increased from 63.5% to 89.5%.The energy consumed by the comminution equipment accounts for the main part of the operating cost of the mineral processing plants. In order to conserve energy, attempts were made to increase the efficiency of the conventional comminution equipment. As a case study, in this research work, a process audit was carried out in the comminution plant of the Steel-Sirjan Iron Ore Complex in order to find the low-cost solutions to improve the product quality and decrease the maintenance and operating costs. Three main steps of the audit were (1) studying the operating manuals and checking the standard process procedures, (2) process data analyzing, and (3) proposing and implementing the proper solutions. Plant audit revealed a low equipment efficiency. The main defects were the crusher operation in the half-full condition, high pressure grinding roll (HPGR) operation in a non-standard condition, high amounts of rejected materials in the HPGR circuit, and low efficiency of the screen. Following this, a series of modifications were made in the crushing and grinding circuit. This consequently caused an increase of 9.3% in the crushing plant throughput in the choked condition of the crushers as opposed to the half-full condition. By increasing the HPGR operational pressure and the hopper level, BBWI of the HPGR product in the super-choked condition was decreased from 16± 0.20 kWh/t to 14.9± 0.25 kWh/t. By modifying the screen process, the circulating load decreased from 79% to 59%, and the screen efficiency increased from 63.5% to 89.5%. | ||
| کلیدواژهها | ||
| Process Audit؛ Jaw crusher؛ Cone crusher؛ HPGR؛ Screen | ||
| مراجع | ||
|
[1]. Wills, B.A. and Finch, J. A. (2016). Wills’ Mineral Processing Technology. Elsevier, 8th Edition.
[2]. Yahyaei, M. and Powell, M. (2018). Production improvement opportunities in comminution circuits. The 15th AusIMM Mill Operators Conference. Brisbane, Qld, August 2018, pp. 673.
[3]. Manouchehri, H.R. (2014). Changing the game in comminution practices: Vibrocone TM, a new crusher having grinding performance. IMPC 2014. Santiago. Chile.
[4]. Maleki-Moghaddam, M. Arghavani, E. Ghasemi, A.R. and Banisi, S. (2019). Changing sag mill liners type from Hi-Low to Hi-Hi at Sarcheshmeh copper complex based on physical and numerical modeling. Journal of Mining and Environment (JME). 10 (2): 365-372.
[5]. Amiri, S. H. and Zare, S. (2019). Influence of Grinding and Classification Circuit on the Performance of Iron Ore Beneficiation – A Plant Scale Study. J. Mineral Processing and Extractive Metallurgy Review, DOI: 10.1080/08827508.2019.1702982.
[6]. Zare, S. Yahyaei, M. Mahmoudi, Maleki-Moghaddam, M. and Banisi. S. (2021). Effect of crushing chamber filling on the performance of cone crushers – The Sarcheshmeh copper complex case. IMPC 2021: XXX International Mineral Processing Congress, Cape Town, South Africa, 18-22 October 2020.
[7]. Herbst, J.A. and Potapov, A.V. (2004). Making a Discrete Grain Breakage model practical for comminution equipment performance simulation. Powder Technology. Journal 2004 143-144, 145-150.
[8]. Jacobson, D. Janssen, P. and Urbinatti, V. (2010). Cavity level’s effect on cone crusher performance and production. 7th International Mineral Processing Seminar 2010, Santiago, Chile, Chapter 1, pp.15-21.
[9]. Huiqi, L. McDowell, Glenn, R. Lowndes and Ian. (2014). Discrete element modelling of rock comminution in a cone crusher using a bonded particle model. Geo-technique Letters, 4, 79-82.
[10]. Quist, J. C. (2017). DEM Modelling and Simulation of Cone Crushers and High Pressure Grinding Rolls. Gothenburg: Chalmers University of Technology.
[11]. Cleary, P.W. Sinnott; M.D. Morrison, R.D. (2017). Cummins. Analysis of cone crusher performance with changes in material properties and operating conditions using DEM. Minerals Engineering, 100: 49-70.
[12]. Evertsson, C. M. Quist, J. Bengtsson, M. and Hulthén, E. (2016). Monitoring and Validation of Life Time Prediction of Cone Crusher with Respect to Loading and Feeding Conditions. Comminution '16. Cape Town: Minerals Engineering.
[13]. Nematollahi, E. Zare, S. Ghorbani, F. Ghasemi, A. and Banisi, S. (2018). an investigation of feed box shape effects on cone crusher performance by discrete element method (DEM) – The Sarcheshmeh copper complex cone crusher case. 29th International Mineral Processing Cong., (IMPC 2018), Mosco, Russia.
[14]. Nematollahi, E. Zare, S. Maleki-Moghaddam, M. Ghasemi, A. Ghorbani, F. and Banisi S. (2021). DEM-based design of feed chute to improve performance of cone crushers, Minerals Engineering. Volume 168, 1 July 2021, 106927.
[15]. Qin, S. J. and Badgwell, T. A. (2003). A survey of industrial model predictive control strategy. J. Control Engineering Practice, 11, 733-764.
[16]. Sbarbaro, D. and Del Villar, R. (2010). Advanced control and supervision of mineral processing plants, Advances in Industrial Control series, Springer Press, London.
[17]. Camalan, M. and Hoşten, C. (2015). Ball-mill grinding kinetics of cement clinker comminuted in the high-pressure roll mill. Mineral Processing and Extractive Metallurgy Review 36 (5):310–16. doi:10.1080/ 08827508.2015.1004402.
[18]. Van der Meer, F. P. Ӧnol, S. and Strasser, S. (2012). Case study of dry HPGR grinding and classification in ore processing. 9th International Mineral Processing Conference, Chile, 32–34.
[19]. Ghobadi, P. and Pourjenaei, E. (2018). Determining impact of operating parameters on HPGR performance using design expert and industrial tests results. XXVII International Mineral Processing Congress, Santiago, Chile.
[20]. Amiri, S.H. Zare, S. Ramezanizadeh, M. Arghavani, E. and Sepehri, F. (2021). The Process Audition, a Method of Improvement Opportunities in Mineral Processing Circuits - Case Study: Gohar-Zamin Iron Ore Beneficiation Plant. IMPC 2020: XXX International Mineral Processing Congress, Cape Town, South Africa, 18-22 October 2020.
[21]. Gupta, A. and Yan, E. S. (2006). Mineral processing design and operation- An introduction (1st Ed.). Perth, Australia, Elsevier Publisher.
[22]. Schützenmeistera, L. Mützea, T. and Kacheb, G. (2020). The Influence of roll speed and feed fineness on HPGR-performance in finish grinding of cement clinker, International Mineral Processing Congress (IMPC).
[23]. Westermeyer, C.P. and Cordes, H. (2000). Operating experience with a roller press at the Los Colorados iron ore dressing plant in Chile. J. Aufbereitungs-Technik/Mineral Processing 11, 497–505.
[24]. Maxton, D., Van der Meer, F.P. and Gruendken, A. (2006). KHD Humboldt Wedag. 150 years of innovation. New developments for the KHD roller press. In: Proceedings SAG, Vancouver, Canada.
[25]. Aminalroaya, A. and Pourghahramani, P. (2021). The Effect of Feed Characteristics on Particles Breakage and Weakening Behavior in High Pressure Grinding Rolls (HPGR), Mineral Processing and Extractive Metallurgy Review, DOI: 10.1080/08827508.2021.1913153.
[26]. Jankovic, A. Valery, W. Sonmez, B. and Oliveria, R. (2014). Effect of circulating load and classification efficiency on hpgr and ball mill capacity. XXVII International Mineral Processing Congress, Santiago, Chile.
[27]. Senchenkoa, A.Y. and Kulikov, Y.V. (2020). Ore hardness effect on design of comminution circuits which use competing technologies: SAG vs HPGR, International Mineral Processing Congress (IMPC).
[28]. Pamparana, G. and Klein, B. (2021). A methodology to predict the HPGR operational gap by using piston press tests. Minerals Engineering Volume 166, 1 June 2021, 106875. https://doi.org/10.1016/j.mineng.2021.106875.
[29]. Li, G. Roufail, R. Klein, B. Nordell, L. Kumar, A. Sun, C. and Kou, J. (2019). Experimental evaluation of the conjugate anvil hammer mill–Comparison of semi-confined to confined particle breakage, Miner. Eng. 137, 34–42.
[30]. Johansson, M. and Evertsson, M. (2019). A time dynamic model of a high pressure grinding rolls crusher, Miner. Eng. 132, 27–38.
[31]. Li, Y.-W. Zhao, L.-L. Hu, E.-Y. Yang, K.-K. He, J.-F. Jiang, H.-S. and Hou, Q.-F. (2019). Laboratory-scale validation of a DEM model of a toothed double-roll crusher and numerical studies, Powder Technol. 356, 60–72.
[32]. Barrios, G.K.P. and Tavares, L.M. (2016). A preliminary model of high pressure roll grinding using the discrete element method and multi-body dynamics coupling, Int. J. Miner. Process. 156 32–42.
[33]. Nagata, Y. Tsunazawa, Y. Tsukada, K. Yaguchi, Y. Ebisu, Y. Mitsuhashi, K. and Tokoro, C. (2020). Effect of the roll stud diameter on the capacity of a high-pressure grinding roll using the discrete element method, Miner. Eng. 154, 106412.
[34]. Cleary, P. W. and Sinnott, M. D. (2021). Axial pressure distribution, flow behavior and breakage within a HPGR investigation using DEM. Minerals Engineering. Volume 163, 15 March 2021, 106769. https://doi.org/10.1016/j.mineng.2020.106769.
[35]. Chehreh Chelgani S. Nasiri, H. and Tohry, A. (2021). Modeling of particle sizes for industrial HPGR products by a unique explainable AI tool- A ‘‘Conscious Lab” development. Advanced Powder Technology, article in press, https://doi.org/10.1016/j.apt.2021.09.020. | ||
|
آمار تعداد مشاهده مقاله: 918 تعداد دریافت فایل اصل مقاله: 838 |
||