A New Case-Based Reasoning Method for Prediction of Fractured Height of Longwall Panels | ||
| Journal of Mining and Environment | ||
| مقاله 15، دوره 12، شماره 4، دی 2021، صفحه 1103-1121 اصل مقاله (3.16 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2021.11230.2105 | ||
| نویسندگان | ||
| H. Rasouli؛ K. Shahriar* ؛ H. Madani | ||
| Department of Mining and Metallurgy Engineering, Amirkabir University of Technology, Tehran, Iran | ||
| چکیده | ||
| When longwall mining involves total extraction, it includes the overlying strata movements. In order to better control these movements, the height of fracturing (HoF) must be determined. HoF includes both the caved and continuous fractured zones, and represents the region of the broken ground whereby a hydraulic connection to the mined seam occurs. Among the various empirical models for predicting HoF, the Ditton's geometry and geology models are widely used in the Australian coalfields. This work uses a case-based reasoning (CBR) method in order to predict HoF. The model's variables, including the panel width (W), cover depth (H), mining height (T), key stratum thickness (t), and its distance from the mined seam (y), are selected via the Buckingham's p-theorem. The data set consisting of 31 longwall panels is partitioned into the training and test subsets using the W/H ratio as the primary classifier of a semi-random partitioning method. This partitioning method overcomes the class imbalance and sample representativeness problems. A new CBR model presents a linear mathematical equation to predict HoF. The results obtained show that the presented model has a high coefficient of determination (= 0.99) and a low average error (AE = 8.44 m). The coefficient of determination for the CBR model is higher than that for the Ditton’s geometry (= 0.93) and geology (= 0.97) models. Contrary to the Ditton's models, the performance of the CBR model is consistent regarding the average and standard errors (AE and SE) of the training and test stages. The proposed model has an acceptable performance for all the width to depth ratios to predict HoF. | ||
| کلیدواژهها | ||
| Empirical model؛ Ditton's prediction models؛ Granular computing؛ Buckingham's p-theorem | ||
| مراجع | ||
|
[1]. Denkhaus, H.G. (1964). Critical review of strata movement theories and their application to practical problems. Journal of the Southern African Institute of Mining and Metallurgy. 64 (1): 310-332.
[2]. Kenny, P. (1969). The caving of the waste on longwall faces. International Journal of Rock Mechanics and Mining Sciences. 6 (6): 541–555.
[3]. National Coal Board. (1975). Subsidence engineers handbook, Production Department, London, UK, 127p.
[4]. Fawcett, R.J., Hibberd, S., and Singh, R.N. (1986). Analytic calculations of hydraulic conductivities above longwall coal face. International Journal of Mine Water. 27 (1): 45–60.
[5]. Follington, I.L. and Isaac, A.K. (1990). Failure zone development above longwall panels. Journal of Mining Science and Technology. 10 (2): 103–116.
[6]. Peng, S.S. (1992). Surface subsidence engineering, Society for Mining, Metallurgy and Exploration, Inc., Littleton, Colorado, 161 p.
[7]. Kelly, M., Luo, X., and Craig, S. (2002). Integrating tools for the longwall mechanical assessment. International Journal of Rock Mechanics and Mining Sciences. 39 (5): 661–676.
[8]. Palchik, V. (2002). Influence of physical characteristics of weak rock mass on height of caved zone over abandoned subsurface coal mines. Journal of Environmental Geology. 42 (1), 92–101.
[9]. RafiqulIslam, M. D., Hayashi, D., and Kamruzzaman, A.B.M. (2009). Finite element modelling of stress distributions and problems for multi-slice longwall mining in Bangladesh with special reference to the Barapukuria coal mine. International Journal of Coal Geology. 78 (2): 91–109.
[10]. Xie, G.X., Chang, J.C., and Yang, K. (2009). Investigations into stress shell characteristics of surrounding rock in fully mechanized top-coal caving face. International Journal of Rock Mechanics and Mining Sciences. 46 (1):172–181.
[11]. Singh, G.S.P. and Singh, U.K. (2009). A numerical modeling approach for assessment of progressive caving of strata and performance of hydraulic powered support in longwall workings. Computers and Geotechnics. 36 (7): 1142–1156.
[12]. Palchik, V. (2005). Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction. Environmental Geology. 48 (1): 68–80.
[13]. Zhimin, X., Yajun, S., Qinghong, D., Guowei, Z., and Shi, L. (2010): Predicting the height of water-flow fractured zone during coal mining under the Xiaolangdi Reservoir. International Journal of Mining Science and Technology. 20 (3): 434–438.
[14]. Miao, X., Cui, X., Wang, J., and Xu, J. (2011). The height of fractured water-conducting zone in undermined rock strata. Journal of Engineering Geology. 120 (4): 32–39.
[15]. Gao, F., Stead, D., and Coggan, J. (2014). Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach. Journal of Computers and Geotechnics. 55 (3): 448–460.
[16]. Mohammadi, S., Ataei, M., KhalooKakaie, R., and Mirzaghorbanali, A. (2018). Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method. Journal of Mining and Environment. 9 (3): 717-726.
[17]. Mohammadi, S., Ataei, M., and Khalokakaei, R. (2018). Assessment the importance of impacting factor on roof strata cavability in the mechanized longwall coal mining. Geotechnical and Geological Engineering. 36 (4): 2667-2682.
[18]. Mohammadi, S., Ataei, M., and Khalokakaei, R. (2019). A New Roof Strata Cavability Index (RSCi) for Longwall Mining Incorporating New Rating System. Geotechnical and Geological Engineering. 37 (5):3619–3636.
[19]. Darvishi, A., Ataei, M., and Rafiee, R. (2020). Investigating the effect of simultaneous extraction of two longwall panels on a maingate gateroad stability using numerical modeling. International Journal of Rock Mechanics and Mining Sciences. 126: 1-14.
[20]. Ansari Ardehjani, E., Ataei, M., and Rafiee, R. (2020). Estimation of the first and periodic roof weighting effect interval in mechanized longwall mining using numerical modeling. International Journal of Geomechanics. 20 (2): 040191641- 0401916413.
[21]. Mohammadi, S., Ataei, M., and Khalokakaei, R. (2020). A Probabilistic Model to Determine Main Caving Span by Evaluating Cavability of Immediate Roof Strata in Longwall Mining. Geotechnical and Geological Engineering. DOI: 10.1007/s10706-020-01620-y.
[22]. Rezai, M., Hossaini, M.F., and Khalokakaei, R. (2015). A time-independent energy model to determine the height of destressed zone above the mined panel in longwall coal mining. Tunnelling and Underground Space Technology. 47: 81-92.
[23]. Rezai, M. (2016). Development of an intelligent model to estimate the height of caving-fracturing zone over the longwall gobs. Neural Computing and Applications. DOI: 10.1007/s00521-016-2809-3.
[24]. Rezai, M., Hossaini, M.F., Majdi, A., and Najmoddini, I. (2017). Determination of the height of destressed zone above the mined panel: An ANN model. International Journal of Mining and Geo-Engineering. 51 (1): 1-7.
[25]. Rezai, M. (2018). Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory. Journal of Mining and Environment. 9 (1): 169-182.
[26]. Rezai, M., Hossaini, M.F., Majdi, A., and Najmoddini, I. (2018). Study of the roof behavior in longwall gob in long-term condition. Journal of Geology and Mining Research. 10 (2): 15-27.
[27]. Ditton Geotechnical Services report (DGS-001/7). (2014). Modified ACARP empirical subsidence and height of fracturing prediction model, New South Wales, Australia, www.whitehavencoal.com.au, 1-79.
[28]. Hebblewhite, B. (2020). Fracturing, caving propagation and influence of mining on groundwater above longwall panels - a review of predictive models. International Journal of Mining Science and Technology. 30 (2): 49-54.
[29]. Sankara, K., Simon, C.K. (2004). Foundations of soft case-based reasoning, Wiley interscience, John Wiley and Sons, Inc., New York, 274.
[30]. Schank, R. and Abelson, R.P. (1997). Case-based reasoning for mission planning, Control and decision making, Florida Atlantic University, 248p.
[31]. Althoff, K. D., Bergmann, R., and Wess, S. (1998). Case-based reasoning for medical decision support tasks. Artificial Intelligence in Medicine. 12 (1): 25–41.
[32]. Richter, M.M., and Weber, R.O. (2013). Case-based Reasoning, Organic Chemistry, John Wiley and Sons, Inc., New York, 505 P.
[33]. Minsky, M. (2006). The Emotion Machine: Commonsense Thinking, Artificial Intelligence, and the Future of the Human Mind. Simon and Schuster, New York, 372p.
[34]. Zadeh, L.A. (2002).Toward a perception-based theory of probabilistic reasoning with imprecise probabilities Journal of Statistical Planning and Inference. 105 (1):233–264.
[35]. Azim, I., Yang, J., Iqbal, M.F., Mahmood, Z., Wang, F., and Liu, Q.F. (2020). Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming. Structures. 25 (1): 212-228.
[36]. Ghazi, D., Inkpen, D., and Szpakowicz, S. (2014). Prior and contextual emotion of words entential context.Computer Speech Language. 28 (1): 76–92.
[37]. Majidfar, M., Jahangiri, B., Buttlar, W.G., and Alavi, A.H. (2019). New machine learning-based prediction models for fracture energy of asphalt mixtures. Measurement. 135 (1), 438-451.
[38]. Pedrycz, W., and Chen, S.M. (2011). Granular Computing and Intelligent Systems: Design with Information Granules of Higher Order and Higher Type, Springer-Verlag, New York, 301p.
[39]. Liu, H., Gegov, A., and Cocea, M. (2016). Rule-based systems: a granular computing perspective. Granular Computing. 1 (4):259–274.
[40]. Livi, L., and Sadeghian, M. (2016). Granular computing, computational intelligence, and the analysis of non-geometricinput spaces.Granular Computing. 1 (1):13–20.
[41]. Herbert, J.P., and Yao, J.T. (2009). A granular computing framework for selforganizing maps. Neurocomputing. 72(13): 2865–2872.
[42]. Qian, Y.H., Liang, J. Y., Wu, W. Z., and Dang, C.Y. (2011). Information granularity in fuzzy binary GrC model. IEEE Transactions Fuzzy Systems. 19 (2): 253–264.
[43]. Kreinovich, V. (2016). Solving equations (and systems of equations) under uncertainty: how different practical problems lead to different mathematical and computational formulations. Granular Computing. 1 (3):171–179.
[44]. Antonelli, M., Ducange, P., Lazzerini, B., and Marcelloni, F. (2016). Multi-objective evolutionary design of granular rule-based classifiers.Granular Computing. 1 (1):37–58.
[45]. Liu, H., Cocea, M. (2017). Granular computing based approach for classification towards reduction of bias in ensemble learning. Granular Computing. 2 (3): 131-139.
[46]. Yao, J.T. (2013). Granular Computing: Perspectives and Challenges. IEEE Transactions on Cybernetics. 43 (6): 1977-1989.
[47]. Ali, A., Shamsuddin, S.M., and Ralescu, AL. (2015). Classification with classimbalance problem: a review. International Journal of Advances in Soft Computing and its applications. 7 (3):176 –204.
[48]. Liu, H., and Cocea, M. (2017). Semi-random partitioning of data into training and test sets in granular computing context. Granular Computing. 1 (2): 357–386. | ||
|
آمار تعداد مشاهده مقاله: 705 تعداد دریافت فایل اصل مقاله: 560 |
||