[1] Bagheri Tofighi M, Biglari H (2021) FEM analyses of low velocity impact response of sandwich composites with nanoreinforced polypropylene core and aluminum face sheets. Phys Mesomech 24(1): 107-116.

[2] Rezasefat M, Mostofi TM, Ozbakkaloglu T (2019) Repeated localized impulsive loading on monolithic and multi-layered metallic plates. Thin Walled Struct 144: 106332.

[3] Mostofi TM, Babaei H, Alitavoli M, Lu G, Ruan D (2019) Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load. Int J Impact Eng 125: 93-106.

[4] Mostofi T M, Babaei H (2019) Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part I: Experimental studies. JSFM 9(1): 71-83.

[5] Sarasini F, Tirillo J, Ferrante L, Sergi C, Sbardella F, Russo P, Simeoli G, Mellier D, Calzolari A (2019) Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates. Compos Struct 223: 110961.

[6] Colombo C, Carrado A, Palkowski H, Vergani L (2015) Impact behaviour of 3-layered metal-polymer-metal sandwich panels. Compos Struct 133: 140-147.

[7] Sun G, Wang E, Wang H, Xiao Z, Li Q (2018) Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores. Mater Des 160: 1117-1136.

[8] Marouf B T, Bagheri R, Mahmudi R (2008) Role of interfacial fracture energy and laminate architecture on impact performance of aluminum laminates. Compos Part A Appl Sci Manuf 39(11): 1685-1693.

[9] Marouf BT, Bagheri R, Mahmudi R (2004) Effects of number of layers and adhesive ductility on impact behavior of laminates. Mater Lett 58(22): 2721-2724.

[10] Katnam KB, Crocombe AD, Sugiman H, Khoramishad H (2011) Static and fatigue failures of adhesively bonded laminate joints in moist environments. Int J Damage Mech 20(8): 1217-1242.

[11] Katnam KB, Crocombe AD, Khoramishad H, Ashcroft A (2011) The static failure of adhesively bonded metal laminate structures: A Cohesive Zone Approach. J Adhes Sci Technol 25(10): 1131-1157.

[12] Pacchione M, Hombergsmeier E (2009) Hybrid metal laminates for low weight fuselage structures. Engineering Against Fracture. Dordrecht, Springer: 41-57.

[13] Yildirim M, Kemal Apalak M (2011) Transverse low-speed impact behavior of adhesively bonded similar and dissimilar clamped plates. J Adhes Sci Technol 25(1): 69-91.

[14] Kemal Apalak M, Yildirim M (2011) Effect of adhesive thickness on transverse low-speed impact behavior of adhesively bonded similar and dissimilar clamped plates. J Adhes Sci Technol 25(19): 2587-2613.

[15] Yildirim M, Kemal Apalak M (2014) Experimental investigation on transverse low-speed impact behavior of adhesively bonded similar and dissimilar clamped plates. J Adhes Sci Technol 28(13): 1219-1242.

[16] Wang P, Zhang X, Zhang H, Li X, He P, Lu G, Yu TX, Yang J (2015) Energy absorption mechanisms of modified double-aluminum layers under low-velocity impact. Int J Appl Mech 7(6): 1-18.

[17] Khoramishad H, Bagheri Tofighi M (2015) Effects of mechanical and geometrical properties of adhesive and metal layers on low-velocity impact behavior of metal laminate structures. J Adhes Sci Technol 29(7): 592-608.

[18] Khoramishad H, Bagheri Tofighi M, Khodaei M (2018) Effect of stacking sequence on low-velocity impact behavior of metal laminates. Phys Mesomech 21(2): 140-149.

[19] Rezasefat M, Mirzababaie Mostofi T, Babaei H, Ziya-Shamami M, Alitavoli M (2019) Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading. P I Mech Eng L-J Mat 233(7): 1449-1471.