[1] Zaniani, J. R., Ghahfarokhi, S. T., Jahangiri, M., and Shamsabadi, A. A. (2019). Design and optimization of heating, cooling, and lightening systems for a residential villa at Saman city, Iran. Journal of Engineering, Design and Technology. Vol. 17, No. 1, pp. 41-52.

[2] Mostafaeipour, A., Goudarzi, H., Sedaghat, A., Jahangiri, M., Hadian, H., Rezaei, M., and Karimi, P. (2019). Energy efficiency for cooling buildings in hot and dry regions using sol-air temperature and ground temperature effects. Journal of Engineering, Design and Technology. Vol. 17, No. 3, pp. 613-628.

[3] Kalbasi, R., Jahangiri, M., Nariman, A., and Yari, M. (2019). Optimal design and parametric assessment of grid-connected solar power plants in Iran, a review. Journal of Solar Energy Research, Vol. 4, No. 2, pp. 142-162.

[4] Kalbasi, R., Jahangiri, M., and Tahmasebi, A. (2021). Comprehensive Investigation of Solar-based Hydrogen and Electricity Production in Iran. International Journal of Photoenergy, Article ID 6627491.

[5] Kalbasi, R., Jahangiri, M., Mosavi, A., Dehshiri, S.J.H., Dehshiri, S.S.H., Ebrahimi, S., Etezadi, Z.A.S., and Karimipour, A. (2021). Finding the best station in Belgium to use residential-scale solar heating, one-year dynamic simulation with considering all system losses: economic analysis of using ETSW. Sustainable Energy Technologies and Assessments, Vol. 45, p. 101097.

[6] Yousefi, Y., Jahangiri, M., Shamsabadi, A. A., and Dehkordi, A. R. (2019). Designing a mediator space and the study of its effect on the energy consumption of a residential building using EnergyPlus software in Savadkuh, Iran. Journal of Engineering, Design and Technology. Vol. 17, No. 4, pp. 833-846.

[7] Pahlavan, S., Jahangiri, M., Alidadi Shamsabadi, A., and Khechekhouche, A. (2018). Feasibility study of solar water heaters in Algeria, a review. Journal of Solar Energy Research, Vol. 3, No. 2, pp. 135-146.

[8] Jahangiri, M., Alidadi Shamsabadi, A., and Saghaei, H. (2018). Comprehensive evaluation of using solar water heater on a household scale in Canada. Journal of Renewable Energy and Environment, Vol. 5, No. 1, pp. 35-42.

[9] Siampour, L., Vahdatpour, S., Jahangiri, M., Mostafaeipour, A., Goli, A., Shamsabadi, A.A., and Atabani, A. (2021). Techno-enviro assessment and ranking of Turkey for use of home-scale solar water heaters. Sustainable Energy Technologies and Assessments, Vol. 43, p. 100948.

[10] Zaniani, J. R., Dehkordi, R. H., Bibak, A., Bayat, P., and Jahangiri, M. (2015). Examining the possibility of using solar energy to provide warm water using RETScreen4 software (case study: Nasr primary school of pirbalut). Current World Environment, Vol. 10, pp. 835- 841.

[11] Nguyen, Q., Naghieh, A., Kalbasi, R., Akbari, M., Karimipour, A., and Tlili, I., 2021. Efficacy of incorporating PCMs into the commercial wall on the energy-saving annual thermal analysis. Journal of Thermal Analysis and Calorimetry, 143(3), pp. 2179-2187.

[12] Nariman, A., Kalbasi, R., and Rostami, S. (2021). Sensitivity of AHU power consumption to PCM implementation in the wall-considering the solar radiation. Journal of Thermal Analysis and Calorimetry, Vol. 143, No. 3, pp. 2789-2800.

[13] Motahar, S. and Jahangiri, M. (2020). Transient heat transfer analysis of a phase change material heat sink using experimental data and artificial neural network. Applied Thermal Engineering, Vol. 167, p. 114817.

[14] Shamsabadi, A.A., Jahangiri, M., Rezaei, T., Farsani, R.Y., Seryani, A., and Hakim, S. (2021). The design of a seasonal heat storage system with a geothermal heat pump for a residential building in Tehran. Journal of Engineering, Design and Technology, in press.

[15] Siampour, L., Vahdatpour, S., Jahangiri, M., Mostafaeipour, A., Goli, A., Shamsabadi, A. A., and Atabani, A. (2021). Techno-enviro assessment and ranking of Turkey for use of home-scale solar water heaters. Sustainable Energy Technologies and Assessments, Vol. 43, p. 100948.

[16] Almutairi, K., Mostafaeipour, A., Baghaei, N., Techato, K., Chowdhury, S., Jahangiri, M., and Rezaei, M. (2021). Techno-Economic Investigation of Using Solar Energy for Heating Swimming Pools in Buildings and Producing Hydrogen: A Case Study. Frontiers in Energy Research, Vol. 9, p. 680103.

[17] Du, L., Ping, L., and Yongming, C. (2020). Study and analysis of air flow characteristics in Trombe wall. Renewable Energy, Vol. 162, pp. 234-241.

[18] Sergei, K., Shen, C., and Jiang, Y., (2020). A review of the current work potential of a trombe wall. Renewable and Sustainable Energy Reviews, Vol. 130, p. 109947.

[19] Saadatian, O., Sopian, K., Lim, C.H., Asim, N., and Sulaiman, M.Y. (2012). Trombe walls: A review of opportunities and challenges in research and development. Renewable and Sustainable Energy Reviewsm, Vol. 16, No. 8, pp. 6340-6351.

[20] Tan, A.Y.K. and Wong, N.H. (2013). Parameterization studies of solar chimneys in the tropics. Energies, Vol. 6, No. 1, pp. 145-163.

[21] Salehpour, A., Sadatlu, M.A.A., and Sojoudi, A. (2019). Unsteady natural convection in a differentially heated rectangular enclosure possessing sinusoidal corrugated side walls loaded with power law non-Newtonian fluid. Fluid Dynamics, Vol. 54, No. 2, pp. 159-176.

[22] Chan, H.Y., Riffat, S.B., and Zhu, J. (2010). Review of passive solar heating and cooling technologies. Renewable and Sustainable Energy Reviews, Vol. 14, No. 2, pp. 781-789.

[23] Yedder, R.B., Du, Z.G., and Bilgen, E. (1990). Numerical study of laminar natural convection in composite trombe wall systems. Solar and wind technology, Vol. 7, No. 6, pp. 675-683.

[24] Yedder, R.B. and Bilgen, E. (1991). Natural convection and conduction in Trombe wall systems. International Journal of Heat and Mass Transfer, Vol. 34, No. 4-5, pp. 1237-1248.

[25] Gan, G. (2006). Simulation of buoyancy-induced flow in open cavities for natural ventilation. Energy and buildings, Vol. 38, No. 5, pp. 410-420.

[26] Mezrhab, A. and Rabhi, M. (2008). Modeling of the thermal transfers in an enclosure of the Trombe wall type. Thermodynamic analysis in renewable energy, Vol. 10, No. 62, pp. 9-14.

[27] Li, Y., Duanmu, X., Sun, Y., Li, J., and Jia, H. (2007). Study on the air movement character in solar wall system, In Proceedings: Building Simulation, pp. 927-931.

[28] Kim, S. and Seo, J. (2012). An influence of the opening location of the trombe wall system on indoor airflow and thermal environment. National Research Foundation of Korea, pp. 1-6.

[29] Mansour, A.R., Jubran, B.A., and Tashtoush, B., An approximate analytical solution to convective laminar heat transfer flow within the Trombe wall channel. International communications in heat and mass transfer (1991) Vol. 18, No. 1, pp. 153-159.

[30] Jubran, B.A., Hamdan, M.A., Tashtoush, B., and Mansour, A.R., An approximate analytical solution for the prediction of transient response of the trombe wall. International communications in heat and mass transfer (1993), Vol. 20, No. 4, pp. 567-577.

[31] Ong, K.S., A mathematical model of a solar chimney. Renewable energy (2003), Vol. 28, No. 7, pp. 1047-1060.

[32] Haghighi, A.P. and Maerefat, M. (2014). Solar ventilation and heating of buildings in sunny winter days using solar chimney. Sustainable Cities and Society, Vol. 10, pp. 72-79.

[33] Li, Z., Du, C., Ahmadi, D., Kalbasi, R., and Rostami, S. (2021). Numerical modeling of a hybrid PCM-based wall for energy usage reduction in the warmest and coldest months. Journal of Thermal Analysis and Calorimetry, Vol. 144, pp. 1985-1998.

[34] Bergman T.L., Incropera F.P., DeWitt D.P., and Lavine A.S. (2011). Fundamentals of heat and mass transfer, New York: John Wiley and Sons.

[35] Jahangiri, M., Saghafian, M., and Sadeghi, M. R. (2015). Effects of non-Newtonian behavior of blood on wall shear stress in an elastic vessel with simple and consecutive stenosis. Biomedical and Pharmacology Journal, Vol. 8, No. 1, pp. 123-131.

[36] Jahangiri, M., Saghafian, M., and Sadeghi, M. R. (2015). Numerical simulation of hemodynamic parameters of turbulent and pulsatile blood flow in flexible artery with single and double stenoses. Journal of Mechanical Science and Technology, Vol. 29, No. 8, pp. 3549-3560.

[37] Jahangiri, M., Haghani, A., Ghaderi, R., and Hosseini Harat, S. M. (2018). Effect of non-Newtonian models on blood flow in artery with different consecutive stenosis. Journal of Advanced Design and Manufacturing Technology, Vol. 11, No. 1, pp. 79-86.

[38] Jahangiri, M., Saghafian, M., and Sadeghi, M. R. (2018). Effect of six non-Newtonian viscosity models on hemodynamic parameters of pulsatile blood flow in stenosed artery. Journal of Computational and Applied Research in Mechanical Engineering, Vol. 7, No. 2, pp. 199-207.

[39] Yadegari, M. and Jahangiri, M. (2019). Simulation of non-Uniform Magnetic Field Impact on non-Newtonian and Pulsatile Blood Flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 57, No. 1, pp. 86-99.

[40] Khanal, R. and Lei, C. (2015). A numerical investigation of buoyancy induced turbulent air flow in an inclined passive wall solar chimney for natural ventilation. Energy and Buildings, Vol. 93, pp. 217-226.

[41] Launder, B.E. and Spalding, D.B. (1983). Numerical prediction of flow, heat transfer, turbulence and combustion, pp. 96-116, Amsterdam: Elsevier Ltd.

[42] Moradicheghamahi, J., Jahangiri, M., Mousaviraad, M., and Sadeghi, M. R. (2020). Computational studies of comparative and cumulative effects of turbulence, fluid–structure interactions, and uniform magnetic fields on pulsatile non-Newtonian flow in a patient-specific carotid artery. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, No. 10, pp. 1-22.

[43] Sharifzadeh, B., Kalbasi, R., and Jahangiri, M. (2020). The effect of turbulence model on predicting the development and progression of coronary artery atherosclerosis. Journal of Computational and Applied Research in Mechanical Engineering, Vol. 10, No. 1, pp. 183-199.

[44] Jahangiri, M., Saghafian, M., and Sadeghi, M. R. (2014). Numerical study of hemodynamic parameters in pulsatile turbulent blood flow in flexible artery with stenosis. In the 22nd annual international conference on mechanical engineering-ISME2014, Shahid Chamran University, Ahvaz, Iran, pp. 1-5.

[45] Jafari, A. and Poshtiri, A.H. (2017). Passive solar cooling of single-storey buildings by an adsorption chiller system combined with a solar chimney. Journal of cleaner production, Vol. 141, pp. 662-682.

[46] Duffie, J.A. and Beckman, W.A. (1980). Solar engineering of thermal processes. New York: John Wiley and Sons.