[1]. Buttner. A. (1974). Diamond tools and stone. Industrial Diamond Review. 34, 89-93.

[2]. Tönshoff, H. K. and Warnecke G. (1982). Research on stone sawing. Advances in Ultrahard Materials Applications Technology. 1, 36-49.

[3]. Vaya. V. (1983). Mineralogical parameters in granite sawing, Technical paper, University of Jodhpur. 7-79.

[4] Mikaeil R., Gharehgheshlagh, H. H., Ataei, M., and Sohrabian, B. (2020). Sensitivity Analysis for Sawing Cost Model Evaluation. A Review on an Iranian Stone Factory. Academic Journal of Economic Studies. 6 (3): 59-65.

[5]. Mikaeil R., Soltani B., Alipour A., and Jafarpour, A. (2021). Evaluating Safety and Economic Challenges in Dimensional Stone Quarries of West-Azerbaijan Province using FMEA Method. Scientific Quarterly Journal of Iranian Association of Engineering Geology.

[6]. Ertingshausen. W. (1985). Wear processes in sawing hard stone. Industrial Diamond Review. 5, 254–258.

[7]. Burgess. R.B. (1978). Circular sawing granite with diamond saw blades. In Proceedings of the Fifth Industrial Diamond Seminar. 3-10.

[8]. Wright D.N. and Cassapi, V.B. (1985). Factors influencing stone sawability. Industrial Diamond Review. 45(2), 84-7.

[9]. Birle J. D. and Ratterman, E. (1986). An approximate ranking of the sawability of hard building stones based on laboratory tests. Dimensional Stone Magazine. 3 (1): 3-29.

[10]. Jennings M. and Wright, D. (1989). Guidelines for sawing stone. Industrial Diamond Review. 49 (2): 70-75.

[11]. Clausen R., Wang, C. Y. and Meding. M. (1996). Characteristics of acoustic emission during single diamond scratching of granite. Industrial Diamond Review. 56 (570): 96-9.

[12]. Ciccu R., Agus, M., Bortolussi, A., Massacci, G., and Careddu. N., (1998). Diamond wire sawing of hard rocks. In Proceedings of "superabrasive and CVD diamond—theory and application", Ultrahard Materials Technical Conference, May 28–30, 1998—Windsor, Ontario, Canada. Also printed in: Diamante. pp 78–95, and in: Finer Points, Vol. 11, No. 4 1999, pp 22–30. Skyland, NC, Industrial Diamond Association of America (Pub).

[13]. Agus M, Bortolussi A, Careddu N, Ciccu R, Grosso B, and Massacci G. (2003). Influence of stone properties on diamond wire performance. In Fourth international conference on computer applications in the minerals industries (CAMI 2003).

[14]. Wei X, Wang CY, and Zhou ZH. (2003). Study on the fuzzy ranking of granite sawability. Journal of materials processing technology.139(1-3), 277-80. https://doi.org/10.1016/S0924-0136(03)00235-8.

[15]. Eyuboglu AS, Ozcelik Y, Kulaksiz S, and Engin IC. (2003). Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites. International Journal of Rock Mechanics and Mining Sciences. 40 (3): 405-14.

[16]. Ersoy A and Atıcı U. (2004). Performance characteristics of circular diamond saws in cutting different types of rocks. Diamond and Related Materials. 13 (1): 22-37. https://doi.org/10.1016/j.diamond.2003.08.016.

[17]. Kahraman S, Fener M, and Gunaydin O. (2004). Predicting the sawability of carbonate rocks using multiple curvilinear regression analysis. International journal of rock mechanics and mining sciences. 41 (7): 1123-31. https://doi.org/10.1016/j.ijrmms.2004.04.009.

[18]. Gunaydin O, Kahraman S, and Fener M. (2004). Sawability prediction of carbonate rocks from brittleness indices. Journal of the Southern African Institute of Mining and Metallurgy. 104 (4): 239-43.

[19]. Ozcelik Y, Polat E, Bayram F, and Ay AM. (2004). Investigation of the effects of textural properties on marble cutting with diamond wire. International Journal of Rock Mechanics and Mining Sciences. 41, 228-34.

[20]. Buyuksagis IS and Goktan RM. (2005). Investigation of marble machining performance using an instrumented block-cutter. Journal of Materials Processing Technology. 169 (2): 258-62. https://doi.org/10.1016/j.jmatprotec.2005.03.014.

[21]. Ersoy A, Buyuksagic S, and Atici U. (2005). Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks. Wear. 258 (9): 1422-36. https://doi.org/10.1016/j.wear.2004.09.060.

[22]. Delgado NS., Rodriguez R., and Rio A. (2005). Sarria I.D, Calleja L., and Argandona. V.G.R. The influence of microhardness on the sawability of Pink Porrino granite (Spain). Int. J. Rock Mech. Min. Sci. 42, 161–166.

[23]. Kahraman S., Altun H., Tezekici B.S., and Fener. M. (2005). Sawability prediction of carbonate rocks from shear strength parameters using artificial neural networks. International Journal of Rock Mechanics & Mining Sciences. 43 (1): 157–164.

[24]. Cai O., Careddu N., Mereu M., and Mulas I. (2007). The influence of operating parameters on the total productivity of diamond wire in cutting granite. IDR-Industrial Diamond Review. 3/07; 25-32. Managing Editor: Martin Jennings, UK. ISSN 0019-8145.

[25]. Fener M, Kahraman S, and Ozder MO. (2007). Performance prediction of circular diamond saws from mechanical rock properties in cutting carbonate rocks. Rock Mechanics and Rock Engineering. 40 (5): 505-17.

[26]. Kahraman S, Ulker U, and Delibalta MS. (2007). A quality classification of building stones from P-wave velocity and its application to stone cutting with gang saws. Journal of the Southern African Institute of Mining and Metallurgy. 107 (7): 427-30.

[27]. Özçelik Y. (2007). The effect of marble textural characteristics on the sawing efficiency of diamond segmented frame saws. Industrial Diamond Review. 2, 65-70.

[28]. Tutmez B., Kahraman S., and Gunaydin O. (2007). Multi-factorial fuzzy approach to the sawability classification of building stones. Construction and Building Materials. 21, 1672–1679.

[29]. Buyuksagis. I. S. Effect of cutting mode on the sawability of granites using segmented circular diamond sawblade. (2007). Journal of Materials Processing Technology. 183 (2-3): 399-406. https://doi.org/10.1016/j.jmatprotec.2006.10.034.

[30]. Mikaiel R., Ataei M., and Hoseinie. H. (2008). Predicting the production rate of diamond wire saws in carbonate rock cutting. IDR. Industrial Diamond Review. 68 (3). 28-34.

[31]. Kahraman S and Gunaydin O. (2008). Indentation hardness test to estimate the sawability of carbonate rocks. Bulletin of Engineering Geology and the Environment. 67 (4): 507-11. https://doi.org/10.1007/s10064-008-0162-1.

[32]. Mikaeil R, Yousefi R, and Ataei M. (2011). Sawability ranking of carbonate rock using fuzzy analytical hierarchy process and TOPSIS approaches. Scientia Iranica. 18 (5): 1106-15.

[33]. Ataei M, Mikaiel R, Sereshki F, and Ghaysari N. (2012). Predicting the production rate of diamond wire saw using statistical analysis. Arabian Journal of Geosciences. 5 (6): 1289-95. https://doi.org/10.1007/s12517-010-0278-z.

[34]. Ataei M, Mikaeil R, Hoseinie SH, and Hosseini SM. (2012). Fuzzy analytical hierarchy process approach for ranking the sawability of carbonate rock. International Journal of Rock Mechanics and Mining Sciences. 50, 83-93. https://doi.org/10.1016/j.ijrmms.2011.12.002.

[35]. Yurdakul M and Akdas H. Prediction of specific cutting energy for large diameter circular saws during natural stone cutting (2012). International Journal of Rock Mechanics and Mining Sciences. 53, 38-44. https://doi.org/10.1016/j.ijrmms.2012.03.008.

[36]. Ghaysari N., Ataei M., Sereshki F., and Mikaiel R. (2012). Prediction of performance of diamond wire saw with respect to texture characteristics of rock/Prognozowanie Wydajności Pracy Strunowej Piły Diamentowej W Odniesieniu do Charakterystyki Tekstury Skał. Archives of Mining Sciences. 57 (4): 887-900.

[37]. Mikaeil R, Ozcelik Y, Yousefi R, Ataei M, and Hosseini SM. (2013). Ranking the sawability of ornamental stone using Fuzzy Delphi and multi-criteria decision-making techniques. International Journal of Rock Mechanics and Mining Sciences. 58, 118-26. https://doi.org/10.1016/j.ijrmms.2012.09.002.

[38]. Sadegheslam G, Mikaeil R, Rooki R, Ghadernejad S, and Ataei M. (2013). Predicting the production rate of diamond wire saws using multiple non-linear regression analysis. Geosystem engineering. 16 (4): 275-85. https://doi.org/10.1080/12269328.2013.856276.

[39]. Careddu N. and Cai. O., Granite sawing by diamond wire: from Madrigali “bicycle” to modern multi-wires. Diamante–Applicazioni and Tecnologia, n. 79, Anno 20, (2014) 33-50. Ed. G and M Associated Sas, Milano, Italy.

[40]. Careddu N. and Lanceni G., The sawing of granite blocks with gang-saw: strong points of the traditional technology. Marmomacchine, n. 243 (2015)12-25. Ed. Promorama, Milan, Italy. ISSN: 0392-6303.

[41]. Tumac D. (2015). Predicting the performance of large diameter circular saws based on Schmidt hammer and other properties for some Turkish carbonate rocks. International Journal of Rock Mechanics and Mining Sciences. 75, 159-168. https://doi.org/10.1016/j.ijrmms.2015.01.015.

[42]. Mikaeil R., Abdolaahi K.M., Sadegheslam G., and Ataei M. (2016). Ranking the Sawability of Dimension Stone by using Promethee, Journal of Mining and Environment. 6 (2): 263-271.

[43]. Aryafar A. and Mikaeil R. (2016). Estimation of the ampere consumption of dimension stone sawing machine using artificial neural networks. International Journal of Mining and Geo-Engineering. 50 (1): 121-130.

[44]. Tumac D. (2016). Artificial neural network application to predict the sawability performance of large diameter circular saws. Measurement. 80, 12-20. https://doi.org/10.1016/j.measurement.2015.11.025.

[45]. Almasi SN, Bagherpour R, Mikaeil R, Ozcelik Y, and Kalhori H. (2017). Predicting the building stone cutting rate based on rock properties and device pullback amperage in quarries using M5P model tree. Geotechnical and Geological Engineering. 35 (4): 1311-26. https://doi.org/10.1007/s10706-017-0177-0.

[46]. Almasi SN, Bagherpour R, Mikaeil R, and Ozcelik Y. (2017). Analysis of bead wear in diamond wire sawing considering the rock properties and production rate. Bulletin of Engineering Geology and the Environment. 76 (4): 1593-607. https://doi.org/10.1007/s10064-017-1057-9.

[47]. Almasi SN, Bagherpour R, Mikaeil R, and Ozcelik Y. (2017). Developing a new rock classification based on the abrasiveness, hardness, and toughness of rocks and PA for the prediction of hard dimension stone sawability in quarrying. Geosystem Engineering. 20 (6): 295-310. https://doi.org/10.1080/12269328.2017.1278727.

[48]. Kamran MA, Khoshsirat M, Mikaeil R, and Nikkhoo F. (2017). Ranking the sawability of ornamental and building stones using different MCDM methods. Journal of Engineering Research. 5 (3).

[49]. Akhyani M, Sereshki F, Mikaeil R, and Taji M. (2017). Evaluation of cutting performance of diamond saw machine using artificial bee colony (ABC) algorithm. International Journal of Mining and Geo-Engineering. 51 (2): 185-90.

[50]. Mikaeil. R, Shaffiee Haghshenas. S, Ozcelik Y, and Shaffiee Haghshenas. S. (2017). Development of intelligent systems to predict diamond wire saw performance. Journal of Soft Computing in Civil Engineering. 1 (2): 52-69. https://doi.org/10.22115/SCCE.2017.49092.

[51]. Yilmazkaya EM, Dagdelenler G, Ozcelik Y, and Sonmez H. (2018). Prediction of mono-wire cutting machine performance parameters using artificial neural network and regression models. Engineering geology. 239, 96-108. https://doi.org/10.1016/j.enggeo.2018.03.009.

[52]. Tumac D and Shaterpour-Mamaghani A. (2018). Estimating the sawability of large diameter circular saws based on classification of natural stone types according to the geological origin. International Journal of Rock Mechanics and Mining Sciences. 101, 18-32. https://doi.org/10.1016/j.ijrmms.2017.11.014.

[53]. Aryafar A, Mikaeil R, Haghshenas S.S, and Haghshenas S.S. (2018). Application of metaheuristic algorithms to optimal clustering of sawing machine vibration. Measurement. 124, 20-31.https://doi.org/10.1016/j.measurement.2018.03.056

[54]. Aryafar A, Mikaeil R, Shafiee Haghshenas S, and Shafiei Haghshenas S. (2018b). Utilization of soft computing for evaluating the performance of stone sawing machines, Iranian Quarries. International Journal of Mining and Geo-Engineering. 52 (1): 31-6.

[55]. Akhyani M, Sereshki F, and Mikaeil R. (2018). An investigation of the effect of toughness and brittleness indices on ampere consumption and wear rate of a circular diamond saw. Rudarsko-geološko-naftni zbornik. 33 (4). https://doi.org/10.17794/rgn.2018.4.8.

[56]. Mikaeil R, Haghshenas S.S, Haghshenas S.S, and Ataei M. (2018a). Performance prediction of circular saw machine using imperialist competitive algorithm and fuzzy clustering technique. Neural Computing and Applications. 2018. 29 (6): 283-92. https://doi.org/10.1007/s00521-016-2557-4.

[57]. Mikaeil R, Haghshenas S.S, Ozcelik Y, and Gharehgheshlagh H.H. (2018b). Performance evaluation of adaptive neuro-fuzzy inference system and group method of data handling-type neural network for estimating wear rate of diamond wire saw. Geotechnical and Geological Engineering. 36 (6): 3779-91. https://doi.org/10.1007/s10706-018-0571-2.

[58]. Careddu N., Cai O., and Perra E.S. (2018). Performance and issues of diamond wire in ornamental basalt quarries. Geoingegneria Ambientale e Mineraria. 155 (3): 85-92.

[59]. Careddu N., Perra E. S., and Masala O. (2019). Diamond wire sawing in ornamental basalt quarries: technical, economic and environmental considerations. Bull Eng Geol Environ. 78, 557-568. https://doi.org/10.1007/s10064-017-1112-6.

[60]. Akhyani M, Mikaeil R, Sereshki F, and Taji M. (2019). Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process. Journal of Mining and Environment. 10 (3): 559-74. https://doi.org/10.22044/jme.2017.5770.1388.

[61]. Mohammadi J, Ataei M, Kakaie R, Mikaeil R, and Shaffiee Haghshenas S. (2019). Performance evaluation of chain saw machines for dimensional stones using feasibility of neural network models. Journal of Mining and Environment. 10 (4): 1105-19. https://doi.org/10.22044/jme.2018.7013.1542.

[62]. Dormishi AR, Ataei M, Khaloo Kakaie R, Mikaeil R, and Shaffiee Haghshenas S. (2019a). Performance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms. Journal of Mining and Environment. 10 (2): 543-57. https://doi.org/10.22044/JME.2018.6750.1496.

[63]. Dormishi A, Ataei M, Mikaeil R, Khalokakaei R, and Haghshenas SS. (2019b). Evaluation of gang saws' performance in the carbonate rock cutting process using feasibility of intelligent approaches. Engineering Science and Technology, an International Journal. 22(3), 990-1000. https://doi.org/10.1016/j.jestch.2019.01.007.

[64]. Mikaeil R, Ozcelik Y, and Ataei M, Shaffiee Haghshenas S. (2019). Application of harmony search algorithm to evaluate performance of diamond wire saw. Journal of Mining and Environment. 10 (1): 27-36. https://doi.org/10.22044/JME.2016.723.

[65]. Haghshenas SS, Faradonbeh RS, Mikaeil R, Haghshenas SS, and Taheri A. (2019). Saghatforoush A., Dormishi A. A new conventional criterion for the performance evaluation of gang saw machines. Measurement. 146: 159-70. https://doi.org/10.1016/j.measurement.2019.06.031.

[66]. Hosseini SM, Ataei M, Khalokakaei R, Mikaeil R, and Haghshenas SS. (2019). Investigating the role of coolant and lubricant fluids on the performance of cutting disks (case study: hard rocks). Rudarsko-geološko-naftni zbornik. 34 (2): 13-24. https://doi.org/10.17794/rgn.2019.2.2.

[67]. Hosseini SM., Ataei M, Khalokakaei R, and Mikaeil R. (2020a). An Experimental Investigation on the Role of Coolant and Lubricant Fluids in the Maximum Electrical Current based upon the Rock Physical and Mechanical Properties. Geotechnical and Geological Engineering. 38 (2): 2317-26. https://doi.org/10.1007/s10706-019-01101-x.

[68]. Hosseini SM, Ataei M, Khalokakaei R, Mikaeil R, and Haghshenas SS. (2020b). Study of the effect of the cooling and lubricant fluid on the cutting performance of dimension stone through artificial intelligence models. Engineering Science and Technology, an International Journal. 23 (1): 71-81. https://doi.org/10.1016/j.jestch.2019.04.012.

[69]. Tönshoff HK, Hillmann-Apmann H, and Asche J. (2002). Diamond tools in stone and civil engineering industry: cutting principles, wear, and applications. Diamond and Related Materials. 11 (3-6): 736-41.

[70]. Mikaeil R., Mokhtarian M., Haghshenas S. S., Careddu N., and Alipour A. (2021). Assessing the System Vibration of Circular Sawing Machine in Carbonate Rock Sawing Process using Experimental Study and Machine Learning. Geotechnical and Geological Engineering, 40, 103–119.

[71]. Ceylanoglu A and Gorgulu K. (1997). The performance measurement results of stone cutting machines and their relations with some material properties, 393–398.

[72]. Atici U. and Ersoy A. (2009). Correlation of specific energy of cutting saws and drilling bits with rock brittleness and destruction energy. Journal of materials processing technology. 209 (5): 2602-12.

[73]. Mikaeil R, Ozcelik Y, Ataei M, and Yousefi R. (2011b). Correlation of specific ampere draw with rock brittleness indices in rock sawing process. Archives of Mining Sciences. 56 (4): 777-788.

[74]. Yaylaci M. (2016). The investigation of crack problem through numerical analysis. Structural engineering and mechanics: An international journal. 57 (6): 1143-1156.

[75]. Yaylaci M., Terzi C., and Avcar M. (2019). Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane. Structural Engineering and Mechanics. 72 (6): 775-783.

[76]. Yaylacı E. U., Yaylacı M., Ölmez H., and Birinci, A. (2020). Artificial neural network calculations for a receding contact problem. Computers and Concrete, An International Journal. 25 (6): 551-563.

[77]. Yaylaci M., Adiyaman G., Oner E., and Birinci A. (2020). Examination of analytical and finite element solutions regarding contact of a functionally graded layer. Structural Engineering and Mechanics. 76 (3): 325-336.

[78]. Yaylacı M. Eyüboğlu A., Adıyaman G., Yaylacı E. U., Öner, E., and Birinci A. (2021). Assessment of different solution methods for receding contact problems in functionally graded layered mediums. Mechanics of Materials, 154, 103730.

[79]. Yaylaci M., Adiyaman G., Oner E., and Birinci A. (2021). Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM. Computers and Concrete. 27 (3): 199-210.

[80]. Yaylaci M., Yayli M., Yaylaci E. U., Olmez H., and Birinci A. (2021). Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method, and multi-layer perceptron. Structural Engineering and Mechanics. 78 (5): 585-597.

[81]. International Society for Rock Mechanics. Rock characterization, testing and monitoring: ISRM suggested methods. Oxford: Pergamon, 1981.

[82]. Naderpour H., Rafiean A. H., and Fakharian P. (2018). Compressive strength prediction of environmentally friendly concrete using artificial neural networks. Journal of Building Engineering, 16, 213-219.

[83]. Naderpour H., Nagai K., Fakharian P., and Haji M. (2019). Innovative models for prediction of compressive strength of FRP-confined circular reinforced concrete columns using soft computing methods. Composite Structures, 215, 69-84.

[84]. Naderpour H., Eidgahee D. R., Fakharian P., Rafiean A. H., and Kalantari S. M. (2020). A new proposed approach for moment capacity estimation of ferrocement members using Group Method of Data Handling. Engineering Science and Technology, an International Journal. 23 (2): 382-391.

[85]. Ghazvinian H., Bahrami H., Ghazvinian H., and Heddam S. (2020). Simulation of monthly precipitation in semnan city using ANN artificial Intelligence model. Journal of Soft Computing in Civil Engineering. 4 (4): 36-46.

[85]. Saber A. (2021). Effects of window-to-wall ratio on energy consumption: application of numerical and ANN approaches. Journal of Soft Computing in Civil Engineering. 5 (4): 41-56.

[87]. Atici U. (2020). Assessment of the Modulus of Elasticity at a Triaxial Stress State for Rocks using Gene Expression Programming. Journal of Soft Computing in Civil Engineering. 4 (4): 47-60.

[88]. Rasti A., Adarmanabadi H. R., and Sahlabadi M. R. (2021). Effects of controllable and uncontrollable parameters on diamond wire cutting performance using statistical analysis: a case study. Rudarsko-geološko-naftni zbornik. 36 (4): 21-32.

[89]. Mikaeil R, Shaffiee Haghshenas S, Ataei M, and Shaffiee Haghshenas S. (2017). The application of multivariate regression analysis to predict the performance of diamond wire saw. In 25th international mining congress and exhibition of Turkey, 122-128.