[1]. Brown, E.T. (2003). Block Caving Geo-mechanics. The International Caving Study I. JKMRC Monograph Series in Mining and Mineral Processing 3. University of Queensland.

[2]. Sainsbury, B. (2012). A model for cave propagation and subsidence assessment in jointed rock masses. University of South Wales.

[3]. Darling, P. (Ed.). (2011). SME mining engineering handbook (Vol. 1). SME.

[4]. Laubscher, D. (2000). Cave Mining Handbook.

[5]. Charles A. Brannon, Gordon K. Carlson, and T.P.C. (2011). Block Caving and Cave Mining. SME mining engineering Handbook (Vol. 1). SME.

[6]. Bieniawski, Z.T. (1976). Rock mass classification in rock engineering applications. In Proceedings of a Symposium on Exploration for Rock Engineering, 1976 (Vol. 12, pp. 97-106).

[7]. Brown, E.T. (2002). Block caving geomechanics.

[8]. Rice, G.S. (1934). Ground movement from mining in Brier Hill mine, Norway, Michigan. Mining and Metallurgy, 15(325), 12-14.

[9]. Panek, L.A. (1984). Subsidence in undercut-cave operations, subsidence resulting from limited extraction of two neighboring-cave operations. Geomechanical applications in hard rock mining, 225-240.

[10]. Carlson, G., and Golden, R. (2008). Initiation, Growth, Monitoring and Management of the 7210 Cave at Henderson Mine-A case study. In 5th International Conference and Exhibition on Mass Mining (Vol. 9, pp. 97-106).

[11]. Beck, D., Sharrock, G., and Capes, G. (2011). A coupled DFE-Newtonian cellular automata scheme for simulation of cave initiation. In Propagation and Induced Seismicity. 45th US Rock Mechanics/Geomechanics Symposium Held in San Francisco, CA.

[12]. Someehneshin, J., Oraee-Mirzamani, B. and Oraee, K. (2015). Analytical model determining the optimal block size in the block caving mining method. Indian Geotechnical Journal, 45(2), 156-168.

[13]. Mahtab, M.A., and Dixon, J.D. (1976). Influence of rock fractures and block boundary weakening on cavability. Trans Soc Min Eng AIME. 260 (1): 6-12.

[14]. McMahon, B.K., and Kendrick, R.F. (1977). Predicting the block caving behavior of orebodies. Society of Mining Engineers of AIME.

[15]. Carter P.G. (2011). Selection Process for Hard‑Rock Mining. SME mining engineering Handbook (Vol. 1). SME.

[16]. Laubscher, D.H. (1990). A geomechanics classification system for the rating of rock mass in mine design. Journal of the Southern African Institute of Mining and Metallurgy, 90(10), 257-273.

[17]. Mawdesley, C., Trueman, R. and Whiten, W.J. (2001). Extending the Mathews stability graph for open–stope design. Mining Technology. 110 (1): 27-39.

[18]. Stewart, S.B.V., and Forsyth, W.W. (1995). The Mathew's method for open stope design. CIM bulletin. 88 (992): 45-53.

[19]. Trueman, R., Mikula, P., Mawdesley, C. A., and Harries, N. (2000). Experience in Australia with the application of the Mathew's method for open stope design. The CIM Bulletin. 93 (1036): 162-167.

[20]. Mawdesley, C.A. (2002). Predicting rock mass cavability in block caving mines.

[21]. Tollenaar, R.N. (2008). Characterization of discrete fracture networks and their influence on caveability and fragmentation (Doctoral dissertation, University of British Columbia).

[22]. Barla, G., Boshkov, S. and Pariseau, W. (1980), Numerical modeling of block caving at the Grace Mine. Geo-mechanics applications in underground hard-rock mining, Turin, Italy, pp. 241-256.

[23]. Rech, W. and Lorig, L. (1992). Predictive numerical stress analysis of panel caving at the Henderson Mine. Proc. of MASSMIN, 92, 55-62.

[24]. Singh, U.K., Stephansson, O.J. and Herdocia, A. (1993). Simulation of progressive failure in hanging-wall and footwall for mining with sub-level caving. Trans Instn Min Metall, Sect A: Min Industry, 102, A188-A194.

[25]. Karzulovic, A., Cavieres, P. and Pardo, C. (1999). Caving subsidence at El Teniente mine. Proceedings of SIMIN, 99.

[26]. Lorig, L. (2000). The Role of Numerical Modelling in Assessing Caveability, Itasca Consulting Group, Inc., Report to the International Caving Study: ICG00-099-3-16.

[27]. Trueman, R., Pierce, M. and Wattimena, R. (2002). Quantifying stresses and support requirements in the undercut and production level drifts of block and panel caving mines. International Journal of Rock Mechanics and Mining Sciences. 39 (5): 617-632.

[28]. Yasitli, N.E. and Unver, B. (2005). 3D numerical modeling of longwall mining with top-coal caving. International Journal of Rock Mechanics and Mining Sciences. 42 (2): 219-235.

[29]. Pierce, M., Cundall, P., Mas Ivars, D., Darcel, C., Young, R.P., Reyes‐Montes, J. and Pettitt, W. (2006). Mass Mining Technology Project: Six Monthly Technical Report, Caving Mechanics, Sub‐Project No. 4.2: Research and Methodology Improvement, and Sub‐Project 4.3, Case Study Application. ICG06‐2292‐1‐Tasks 2‐3‐14, Itasca Consulting Group, Inc., Minneapolis.

[30]. Beck, D., Reusch, F. and Arndt, S. (2007). Estimating the Probabaility of Mining-Induced Seismic Events using Mine-Scale, Inelastic Numerical Models. In Deep Mining 2007: Proceedings of the Fourth International Seminar on Deep and High Stress Mining (pp. 31-41). Australian Centre for Geomechanics.

[31]. Singh, G.S.P. and Singh, U.K. (2010). Numerical modeling study of the effect of some critical parameters on caving behavior of strata and support performance in a long-wall working. Rock Mechanics and Rock Engineering, 43(4), 475-489.

[32]. Woo, K. S., Eberhardt, E., Rabus, B., Stead, D. and Vyazmensky, A. (2012). Integration of field characterisation, mine production and InSAR monitoring data to constrain and calibrate 3-D numerical modelling of block caving-induced subsidence. International Journal of Rock Mechanics and Mining Sciences, 53, 166-178.

[33]. Cumming-Potvin, D., Wesseloo, J., Pierce, M.E., Garza-Cruz, T., Bouzeran, L., Jacobsz, S.W. and Kearsley, E. (2018, October). Numerical simulations of a centrifuge model of caving. In Caving 2018: Proceedings of the Fourth International Symposium on Block and Sublevel Caving (pp. 191-206). Australian Centre for Geomechanics.

[34]. Öge, İ.F. (2018). Prediction of top coal cavability character of a deep coal mine by empirical and numerical methods. Journal of Mining Science. 54 (5): 793-803.

[35]. Xia, Z., Tan, Z., Pei, Q. and Wang, J. (2019). Ground pressure damage evolution mechanism of extraction level excavations induced by poor undercutting in block caving method. Geotechnical and Geological Engineering. 37 (5): 4461-4472.

[36]. Xia, Z., Tan, Z. and Miao, Y. (2020). Damage evolution mechanism of extraction structure during mining gently dipped orebody by block caving method. Geotechnical and geological engineering, 38(4), 3891-3902.

[37]. Lorig, L.J., Board, M.P., Potyondy, D.O. and Coetzee, M. J. (1995). Numerical modelling of caving using continuum and micro-mechanical models. In Proc. of CAMI’95 Canadian Conference on Computer Applications in the Mining Industry, Montreal, Qebec, Kanada (pp. 416-424).

[38]. Gilbride, L.J., Free, K.S., and Kehrman, R. (2005). Modeling Block Cave Subsidence at the Molycorp, Inc., Questa Mine? A Case Study. In Alaska Rocks 2005, The 40th US Symposium on Rock Mechanics (USRMS). OnePetro.

[39]. Kalenchuk, K.S., McKinnon, S. and Diederichs, M.S. (2008). Block geometry and rockmass characterization for prediction of dilution potential into sub-level cave mine voids. International Journal of Rock Mechanics and Mining Sciences. 45 (6): 929-940.

[40]. Xie, Y.S. and Zhao, Y.S. (2009). Numerical simulation of the top coal caving process using the discrete element method. International Journal of Rock Mechanics and Mining Sciences. 46 (6): 983-991.

[41]. Sharrock, G., Vakili, A., Duplancic, P. and Hastings, N. (2011). Numerical analysis of subsidence for Perserverence Deeps Block Cave in Continuum and Distinct Element Numerical Modelling in Geomechanics. Sainsbury, Hart, Detournay and Nelson (eds.), Paper, 06-03.

[42]. Gao, F., Stead, D. and Coggan, J. (2014). Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach. Computers and Geotechnics, 55, 448-460.

[43]. Rafiee, R., Ataei, M., KhalooKakaie, R., Jalali, S. E., Sereshki, F. and Noroozi, M. (2018). Numerical modeling of influence parameters in cavabililty of rock mass in block caving mines. International Journal of Rock Mechanics and Mining Sciences, 105, 22-27.

[44]. Song, Z. and Konietzky, H. (2019). A particle-based numerical investigation on longwall top coal caving mining. Arabian Journal of Geosciences. 12 (18): 1-18.

[45]. Wang, J., Wei, W., Zhang, J., Mishra, B. and Li, A. (2020). Numerical investigation on the caving mechanism with different standard deviations of top coal block size in LTCC. International Journal of Mining Science and Technology. 30 (5): 583-591.

[46]. Vyazmensky, A., Elmo, D., Stead, D. and Rance, J.R. (2007, May). Combined finite-discrete element modelling of surface subsidence associated with block caving mining. In 1st Canada-US Rock Mechanics Symposium. OnePetro.

[47]. Vyazmensky, A., Elmo, D. and Stead, D. (2010). Role of rock mass fabric and faulting in the development of block caving induced surface subsidence. Rock mechanics and rock engineering. 43 (5): 533-556.

[48]. Rance, J.M., Van As, A., Owen, D.R.J., Feng, Y.T., and Pine, R. J. (2007). Computational modeling of multiple fragmentation in rock masses with application to block caving. In 1st Canada-US Rock Mechanics Symposium. OnePetro.

[49]. Mohammadi, S., Ataei, M., Kakaie, R., Mirzaghorbanali, A. and Aziz, N. (2021). A Probabilistic Model to Determine Main Caving Span by Evaluating Cavability of Immediate Roof Strata in Longwall Mining. Geotechnical and Geological Engineering. 39 (3): 2221-2237.

[50]. Ivars, D.M., Pierce, M.E., Darcel, C., Reyes-Montes, J., Potyondy, D.O., Young, R.P., and Cundall, P.A. (2011). The synthetic rock mass approach for jointed rock mass modelling. International Journal of Rock Mechanics and Mining Sciences. 48 (2): 219-244.

[51]. Karekal, S., Das, R., Mosse, L. and Cleary, P.W. (2011). Application of a mesh-free continuum method for simulation of rock caving processes. International Journal of Rock Mechanics and Mining Sciences. 48 (5): 703-711.

[52]. Park, D.W., and Kicker, D.C. (1985). Physical model study of a longwall mine. Mining Science and Technology. 3 (1): 51-61.

[53]. Kang, H., Li, J., Yang, J. and Gao, F. (2017). Investigation on the influence of abutment pressure on the stability of rock bolt reinforced roof strata through physical and numerical modeling. Rock Mechanics and Rock Engineering. 50 (2): 387-401.

[54]. McNearny, R.L., and Abel Jr, J.F. (1993). Large-scale two-dimensional block caving model tests. In International journal of rock mechanics and mining sciences and geomechanics abstracts (Vol. 30, No. 2, pp. 93-109). Pergamon.

[55]. Carmichael. P. and Hebblewhite. B. (2012). An investigation into semi-intact rock mass representation for physical modelling block caving mechanics zone. Mining education Australian Research projects review.

[56]. Cumming-Potvin, D., Wesseloo, J., Jacobsz, S.W., and Kearsley, E. (2016). Results from physical models of block caving. In 7th International Conference and Exhibition on Mass Mining (MassMin 2016), 9-11 May 2016, Sydney, New South Wales, Australia (pp. 329-340). Australasian Institute of Mining and Metallurgy.

[57]. Jacobsz, S.W., Kearsley, E.P., Cumming-Potvin, D. and Wesseloo, J. (2018). Modelling cave mining in the geotechnical centrifuge. In Physical Modeling in Geotechnics, The 9th International Conference on Physical Modelling in Geotechnics (ICPMG 2018) (pp. 809-814).

[58]. Bai, Q., Tu, S. and Wang, F. (2019). Characterizing the top coal cavability with hard stone band (s): insights from laboratory physical modeling. Rock Mechanics and Rock Engineering. 52 (5): 1505-1521.

[59]. Heydarnoori, V., Khosravi, M.H. and Bahaaddini, M. (2020). Physical modelling of caving propagation process and damage profile ahead of the cave-back. Journal of Mining and Environment. 11 (4): 1047-1058.

[60]. Rafiee, R., Ataei, M., KhaloKakaie, R., Jalali, S.E. and Sereshki, F. (2016). A fuzzy rock engineering system to assess rock mass cavability in block caving mines. Neural Computing and Applications. 27 (7): 2083-2094.

[61]. Azadmehr, A., and Jalali, S.M.E. (2017). Assessment of rock mass caveability in block caving mining method, using Rock Engineering Systems (RES). Tunneling and Underground Space Engineering. 6 (1): 57-78.

[62]. Rafiee, R., Ataei, M., Khalokakaie, R., Jalali, S.M.E., and Sereshki, F. (2015). Determination and assessment of parameters influencing rock mass cavability in block caving mines using the probabilistic rock engineering system. Rock Mechanics and Rock Engineering. 48 (3): 1207-1220.