Reinforcing Proton Exchange Membrane Fuel Cell Powered Unmanned Aerial Vehicle with an Innovative Combined Flow Field | ||
| Renewable Energy Research and Applications | ||
| دوره 4، شماره 1، فروردین 2023، صفحه 87-101 اصل مقاله (1.11 M) | ||
| نوع مقاله: Original Article | ||
| شناسه دیجیتال (DOI): 10.22044/rera.2021.11214.1081 | ||
| نویسندگان | ||
| M. Rostami؛ A. H. Farajollahi* ؛ F. Bagherpor؛ V. Sfandiyar | ||
| Department of Aerospace Engineering, Faculty of Engineering, Imam Ali University, Kargar Street, Tehran, Iran. | ||
| چکیده | ||
| Polymer electrolyte membrane fuel cells (PEMFCs) produce high power density efficiently and in a pollution-free way. Therefore, it is employed in UAVs. Flow fields play key role in the performance of PEMFC-powered UAVs. In this study, a novel flow field named modified combined was introduced and investigated by a three-dimensional and two-phase PEMFC model. In the flow field main channels are tapered aiming to reinforce the performance. The study consists of two steps. In the first stage, modified combined was compared with parallel, serpentine, interdigitated, and combined. The results showed that in the modified combined compared with simple combined, pressure drop decreased 22.6%. Modified combined demonstrated suitable oxygen distribution and appropriate management and the specific power of modified combined is the highest value among all flow fields. Finally, the effect of atmospheric conditions on the performance of the PEMFC with modified combined flow field was studied and two equations were presented to predict the performance at 0.4V and 0.7V at the different altitudes of flight. The findings unveiled the point that in the cruise phase of the flight, low voltage is more suitable for PEMFC-driven UAV with modified combined flow field. All in all, modified combined flow field and low voltage are recommended to be utilized in PEMFCs as propulsion system of UAVs. | ||
| کلیدواژهها | ||
| PEMFC؛ Innovative flow field؛ Atmospheric conditions of flight؛ Performance | ||
| مراجع | ||
|
[1] Stöcker C, Bennett R, Nex F, Gerke M, and Zevenbergen J. Review of the current state of UAV regulations. Remote Sens 2017;9. https://doi.org/10.3390/rs9050459.
[2] Pan ZF, An L, and Wen CY. Recent advances in fuel cells based propulsion systems for unmanned aerial vehicles. Appl Energy 2019;240:473–85. https://doi.org/10.1016/j.apenergy.2019.02.079.
[3] Adão T, Hruška J, Pádua L, Bessa J, Peres E, Morais R et al. Hyperspectral imaging: A review on UAV-based sensors, data processing, and applications for agriculture and forestry. Remote Sens 2017;9:1110.
[4] Zhang Q, Xu L, Li J, and Ouyang M. Performance prediction of proton exchange membrane fuel cell engine thermal management system using 1D and 3D integrating numerical simulation. Int J Hydrogen Energy 2018;43:1736–48. https://doi.org/10.1016/j.ijhydene.2017.10.088.
[5] Bao Z, Niu Z, and Jiao K. Analysis of single- and two-phase flow characteristics of 3-D fine mesh flow field of proton exchange membrane fuel cells. J Power Sources 2019;438:226995. https://doi.org/10.1016/J.JPOWSOUR.2019.226995.
[6] Toghyani S, Moradi Nafchi F, Afshari E, Hasanpour K, Baniasadi E, and Atyabi SA. Thermal and electrochemical performance analysis of a proton exchange membrane fuel cell under assembly pressure on gas diffusion layer. Int J Hydrogen Energy 2018;43:4534–45. https://doi.org/10.1016/j.ijhydene.2018.01.068.
[7] Mohammedi A, Sahli Y, and Ben Moussa H. 3D investigation of the channel cross-section configuration effect on the power delivered by PEMFCs with straight channels. Fuel 2020;263:116713. https://doi.org/10.1016/j.fuel.2019.116713.
[8] Wang X, Qin Y, Wu S, Shangguan X, Zhang J, and Yin Y. Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance. J Power Sources 2020;457:228034. https://doi.org/10.1016/j.jpowsour.2020.228034.
[9] Kahraman H and Orhan MF. Flow field bipolar plates in a proton exchange membrane fuel cell: Analysis andmodeling. Energy Convers Manag 2017;133:363–84. https://doi.org/10.1016/j.enconman.2016.10.053.
[10] Karanfil G. Importance and applications of DOE/optimization methods in PEM fuel cells: A review. Int J Energy Res 2020;44:4–25. https://doi.org/10.1002/er.4815.
[11] Afshari E, Ziaei-Rad M, and Dehkordi MM. Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells. J Energy Inst 2017;90:752–63. https://doi.org/10.1016/j.joei.2016.07.002.
[12] Ghasabehi M, Ashrafi M, and Shams M. Performance analysis of an innovative parallel flow field design of proton exchange membrane fuel cells using multiphysics simulation. Fuel 2021;285:119194. https://doi.org/10.1016/j.fuel.2020.119194.
[13] Duy VN, Lee J, Kim K, Ahn J, Park S, Kim T et al. Dynamic simulations of under-rib convection-driven flow-field configurations and comparison with experiment in polymer electrolyte membrane fuel cells. J Power Sources 2015;293:447–57. https://doi.org/10.1016/j.jpowsour.2015.05.107.
[14] Heidary H, Kermani MJ, and Dabir B. Influences of bipolar plate channel blockages on PEM fuel cell performances. Energy Convers Manag 2016;124:51–60. https://doi.org/10.1016/j.enconman.2016.06.043.
[15] Fan L, Niu Z, Zhang G, and Jiao K. Optimization design of the cathode flow channel for proton exchange membrane fuel cells. Energy Convers Manag 2018;171:1813–21. https://doi.org/10.1016/j.enconman.2018.06.111.
[16] Yang WJ, Wang HY, Lee DH, and Kim YB. Channel geometry optimization of a polymer electrolyte membrane fuel cell using genetic algorithm. Appl Energy 2015;146:1–10. https://doi.org/10.1016/j.apenergy.2015.01.130.
[17] Wang XD, Yan WM, Duan YY, Weng FB, Jung G Bin, and Lee CY. Numerical study on channel size effect for proton exchange membrane fuel cell with serpentine flow field. Energy Convers Manag 2010;51:959–68. https://doi.org/10.1016/j.enconman.2009.11.037.
[18] Sala P, Stampino PG, and Dotelli G. Design Approach for the Development of the Flow Field of Bipolar Plates for a PEMFC Stack Prototype. J Fuel Cell Sci Technol 2014;11:061003. https://doi.org/10.1115/1.4028150.
[19] Mahmoudimehr J and Daryadel A. Influences of feeding conditions and objective function on the optimal design of gas flow channel of a PEM fuel cell. Int J Hydrogen Energy 2017;42:23141–59. https://doi.org/10.1016/j.ijhydene.2017.07.196.
[20] Wang L, Husar A, Zhou T, and Liu H. A parametric study of PEM fuel cell performances. Int J Hydrogen Energy 2003;28:1263–72. https://doi.org/10.1016/S0360-3199(02)00284-7.
[21] Kahveci EE and Taymaz I. Assessment of single-serpentine PEM fuel cell model developed by computational fluid dynamics. Fuel 2018;217:51–8. https://doi.org/10.1016/j.fuel.2017.12.073.
[22] González-Espasandín Ó, Leo TJ, Raso MA, and Navarro E. Direct methanol fuel cell (DMFC) and H2 proton exchange membrane fuel (PEMFC/H2) cell performance under atmospheric flight conditions of Unmanned Aerial Vehicles. Renew Energy 2019;130:762–73. https://doi.org/10.1016/j.renene.2018.06.105.
[23] Ghasabehi M, Shams M, and Kanani H. Multi-objective optimization of operating conditions of an enhanced parallel flow field proton exchange membrane fuel cell. Energy Convers Manag 2021;230:113798. https://doi.org/10.1016/j.enconman.2020.113798.
[24] Qin Y, Du Q, Fan M, Chang Y, and Yin Y. Study on the operating pressure effect on the performance of a proton exchange membrane fuel cell power system. Energy Convers Manag 2017;142:357–65. https://doi.org/10.1016/j.enconman.2017.03.035.
[25] Jawrungrit C, Sirivat A, and Siemanond K. Improving proton exchange membrane efficiency of fuel cell by numerical simulation and optimization. Comput Aided Chem Eng 2016;38:1887–92. https://doi.org/10.1016/B978-0-444-63428-3.50319-2.
[26] Rostami M, Dehghan Manshadi M, and Afshari E. Performance evaluation of two proton exchange membrane and alkaline fuel cells for use in UAVs by investigating the effect of operating altitude . Int J Energy Res 2021:1–16. https://doi.org/10.1002/er.7263.
[27] Toghyani S, Atyabi SA, and Gao X. Enhancing the Specific Power of a PEM Fuel Cell Powered UAV with a Novel Bean-Shaped Flow Field. Energies 2021;14:2494. https://doi.org/10.3390/en14092494.
[28] Seo S-HH, Choi J-II, and Song J. Secure Utilization of Beacons and UAVs in Emergency Response Systems for Building Fire Hazard. Sensors 2017;17:2200. https://doi.org/10.3390/s17102200.
[29] Dyantyi N, Parsons A, Barron O, and Pasupathi S. State of health of proton exchange membrane fuel cell in aeronautic applications. J Power Sources 2020;451:227779. https://doi.org/10.1016/j.jpowsour.2020.227779.
[30] Boukoberine MN, Zhou Z, and Benbouzid M. A critical review on unmanned aerial vehicles power supply and energy management: Solutions, strategies, and prospects. Appl Energy 2019;255:113823. https://doi.org/https://doi.org/10.1016/j.apenergy.2019.113823.
[31] Belmonte N, Staulo S, Fiorot S, Luetto C, Rizzi P, and Baricco M. Fuel cell powered octocopter for inspection of mobile cranes: Design, cost analysis and environmental impacts. Appl Energy 2018;215:556–65. https://doi.org/https://doi.org/10.1016/j.apenergy.2018.02.072.
[32] Yuan W, Tang Y, Pan M, Li Z, and Tang B. Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance. Renew Energy 2010;35:656–66. https://doi.org/10.1016/j.renene.2009.08.017.
[33] Atyabi SA and Afshari E. Three-dimensional multi-phase model of proton exchange membrane fuel cell with honeycomb flow field at the cathode side. J Clean Prod 2019;214:738–48. https://doi.org/10.1016/j.jclepro.2018.12.293.
[34] Um S, Wang C-Y, and Chen KS. Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells. Vol. 147. 2000.
[35] Nam JH and Kaviany M. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium. Int J Heat Mass Transf 2003;46:4595–611. https://doi.org/10.1016/S0017-9310(03)00305-3.
[36] Van Nguyen T. Modeling two-phase flow in the porous electrodes of proton exchange membrane fuel cells using the interdigitated flow fields. Proc-Electrochem Soc 1999;99–14:222–41.
[37] Springer TE, Zowodzinski TA, and Gottesfeld S. Polymer Electrolyte Fuel Cell Model. J Electrochem Soc 1991;138:2334–42. https://doi.org/10.1149/1.2085971.
[38] Fluent A. Theory Guide 17.2. Ansys Inc USA 2016.
[39] Bozorgnezhad A, Shams M, Kanani H, Hasheminasab M, and Ahmadi G. Two-phase flow and droplet behavior in microchannels of PEM fuel cell. Int J Hydrogen Energy 2016;41:19164–81. https://doi.org/10.1016/j.ijhydene.2016.09.043.
[40] Bozorgnezhad A, Shams M, Kanani H, Hasheminasab M, and Ahmadi G. The experimental study of water management in the cathode channel of single-serpentine transparent proton exchange membrane fuel cell by direct visualization. Int J Hydrogen Energy 2015;40:2808–32. https://doi.org/10.1016/j.ijhydene.2014.12.083.
[41] Kanani H. Experimental Investigation of Flooding in the Cathode Channels of the Polymer Exchange Membrane Fuel Cells. K. N. Toosi University of Technology, 2015.
[42] Anderson R, Zhang L, Ding Y, Blanco M, Bi X, and Wilkinson DP. A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells. J Power Sources 2010;195:4531–53. https://doi.org/10.1016/j.jpowsour.2009.12.123.
[43] Lapeña-Rey N, Blanco JA, Ferreyra E, Lemus JL, Pereira S, and Serrot E. A fuel cell powered unmanned aerial vehicle for low altitude surveillance missions. Int J Hydrogen Energy 2017;42:6926–40. https://doi.org/https://doi.org/10.1016/j.ijhydene.2017.01.137.
[44] Li X, Sabir I. Review of bipolar plates in PEM fuel cells: Flow-field designs. Int J Hydrogen Energy 2005;30:359–71. https://doi.org/10.1016/j.ijhydene.2004.09.019.
[45] Ferreira RB, Falcão DS, and Pinto AMFR. Simulation of membrane chemical degradation in a proton exchange membrane fuel cell by computational fluid dynamics. Int J Hydrogen Energy 2020. https://doi.org/10.1016/j.ijhydene.2020.09.179.
[46] LaConti AB, Hamdan M, and McDonald RC. Mechanisms of membrane degradation. Handb Fuel Cells2010. https://doi.org/10.1002/9780470974001.f303055.
| ||
|
آمار تعداد مشاهده مقاله: 2,415 تعداد دریافت فایل اصل مقاله: 829 |
||