[1] Kendall HA, Goins WC (1960) Design and operation of jet-bit programs for maximum hydraulic horsepower, impact force or jet velocity. Tram AIME 219: 238-250.

[2] Sutko AA, Myers GM (1971) The effect of nozzle size, number, and extension on the pressure distribution under a tri-cone bit. J Pet Technol 1299-1304.

[3] Townsend SC (1976) Comparison of two-nozzle and three-nozzle drilling under simulated field conditions. Master’s Thesis, University of Tulsa.

[4] Smalling DA, Key TA (1979) Optimization of jet bit hydraulics using impact pressure. SPE 8440, 54th Annual Fall Technical Conference and Exhibition, Las Vegas, Nevada.

[5] Ramsey MS,  Robinson LH, Miller JF, Morrison ME (1983) Bottomhole pressures measured while drilling. IADC/SPE Paper No. 11413, IADC/SPE Drilling Conference, New Orleans, Louisiana.

[6] Warren T, Winters W (1984) The effect of nozzle diameter on jet impact for a tri cone bit. SPE J 24(1).

[7] Cook RL, Nicholson JW, Sheppard MC, Westlake W (1989) First real time measurements of downhole vibrations, forces, and pressures used to monitor directional drilling operations. SPE/IADC 18651 Drilling Conference held in New Orleans, Louisiana.

[8] Wells MR, Pessier RC (1993) The effects of asymmetric nozzle sizing on the performance of roller cone bits. SPE J 25738.

[9] Zhao J, Xu YJ, Ren JH, Hou DJ (2014) Numerical simulation of the bottom hole flow field of particle impact drilling. APED 8(1): 18-23.

[10] Hansen E (2012) Automatic evaluation of drilling fluid properties. Master’s Thesis, University of Stavanger.

[11] Moslemi A, Rahmani R, Graham R, Ivie B (2015) Hydraulic design of shale drill bit using an integrated numerical and experimental approach. Society of Petroleum Engineers, SPE-173038-MS, SPE/IADC Drilling Conference and Exhibition, London, England.

[12] Meng X, Zhou H, Fan H, Peng Q, Deng S (2016) A systematic drilling hydraulics optimization method for improving rate of penetration and its application in ultra-deep wells. IPTC-18829-MS, International Petroleum Technology Conference, Bangkok, Thailand.

[13] Brown ET, Green SJ, Black AD, Tibbitts GA (1982) The influence of jet-bit hydraulics on drilling performance in shale. SPE-11283-MS.

[14] Eckel JR, Bielstein WJ (1951) Nozzle design and its effect on .drilling rate and pump operation. Drill And Prod Prac API 28-46.

[17] Versan M, Tolga A (2005) Effect of polymers on the rheological properties of KCl/polymer type drilling fluid. Energy Sources 27: 405-415.

[18] Bourgoyne AT, Chenevert ME, Millheim KK, Young FS (1991) Applied drilling engineering. SPE Textbook Series,  2, Richardson, TX.

[19] Bahrainian SS, Nabati A, Hajidavalloo E (2018) Effect of different rheological models on prediction of tri-cone bit pressure drop. Int J Oil Gas Coal Technol 18(3/4): 305-323.

 [21] Bahrainian SS, Mehrdoost Z (2012) An automatic unstructured grid generation method for viscous flow simulations. Math Comput Simul 83: 23-43.

[22] Xue S, Li J, Peng H, Chen Z, Wang Y, Zhu H (2005) Numerical simulation of ultra-high pressure rotary atomizing water jet flow field. WJTA American Water jet Conference, Houston, Texas.