[1] Feddersen E (1960) High Ehergy Rate… its application to metal forming. JOM 12(9):682-686.

[2] Iyama H and Itoh S (2007) Study on explosive forming using pressure vessel and metal die. ASME 2007 Pressure Vessels and Piping Conference.

[3] Iyama H, Higa Y, Nishi M, Itoh S (2017) Numerical simulation of explosive forming using detonating fuse. Int J Multiphys 11(3): 233-244.

[4] Kiciński R, Szturomski B (2020) pressure wave caused by trinitrotoluene (TNT) underwater explosion—short review. Appl Sci 10(10): 3433.

[5] Geers TL, Hunter KS (2002) An integrated wave-effects model for an underwater explosion bubble. J Aco Soc Ame 111(4): 1584-1601.

[6] Rajasekar J, Kim TH, Kim HD (2020) Visualization of shock wave propagation due to underwater explosion. J Visualization 23(5): 825-837.

[7] Keil A (1956) Introduction to underwater explosion research. UERD, Norfolk Naval Ship Yard, Portsmouth, Virginia.

[8] Rajendran R, Satyanarayana K (1997) Interaction of finite amplitude acoustic waves with a plane plate. Jour Aco Soci Ind 25: V5.

[9] Ezra AA (1973) Principles and practice of explosive metalworking. Ind News 150.

[10] Alipour R, Najarian F (2011) Modeling and investigation of elongation in free explosive forming of aluminum alloy plate. Proc World Academy Sci Eng Tec 76:490-493.

[11] Iyama H, Higa Y, Nishi M, Itoh Sh (2019) Magnesium alloy forming using underwater shock wave by wire electric discharge. Int J Multiphysics 13.

[12]  Liu NN, Zhang AM, Liu YL, Li T (2020) Numerical analysis of the interaction of two underwater explosion bubbles using the compressible Eulerian finite-element method. Phys Fluids A 32(4): 046107.

[13] Mynors DJ, Zhang B (2002) Applications and capabilities of explosive forming. J Mater Process Technol 125: 1-25.

[14] Cole RH, Weller R (1948) Underwater explosions. PhT 1(6): 35.

[15] Stiepanow W, Sipilin P, Nawagin J, Pankratow W (1968) Tłoczenie wybuchowe. Wydawnictwa Naukowo-Techniczne, Warszawa.

[16] Reid WD (1996) The response of surface ships to underwater explosions. Defence Science And Technology Organization Canberra, Australia.

[17] Rajendran R, Narasimhan K (2006) Deformation and fracture behaviour of plate specimens subjected to underwater explosion—a review. Int J Impact Eng 32(12): 1945-1963.

[18] Ming F, Zhang A, Xue Y, Wang S (2016) Damage characteristics of ship structures subjected to shockwaves of underwater contact explosions. Ocean Eng 117: 359-382.

[19] Espinosa HD, Lee S, Moldovan N (2006) A novel fluid structure interaction experiment to investigate deformation of structural elements subjected to impulsive loading. Exp Mech 46(6): 805-824.

[20] Dai K, Liu H, Chen P, Guo B, Xiang D, Rong J (2019) Dynamic response of copper plates subjected to underwater impulsive loading. Appl Sci 9(9): 1927.

[21] Xiang DL, Rong JL, He X (2015) Experimental investigation of dynamic response and deformation of aluminium honeycomb sandwich panels subjected to underwater impulsive loads. Shock Vib 2015.

[22] Deshpande V, Heaver A, Fleck N (2006) An underwater shock simulator. Proc Royal Soc A Math Phy Eng Sci 462(2067): 1021-1041.

[23] Rajendran R, Narasimhan K (2001) Damage prediction of clamped circular plates subjected to contact underwater explosion. Int J Impact Eng 25(4): 373-386.

[24] Jones N (1989) Structural impact. Cambridge University Press, Cambridge.

[25] Florence A (1966) Circular plate under a uniformly distributed impulse. Int J Solids Struct 2(1): 37-47.

[26]  Wang AJ, Hopkins HG (1954) On the plastic deformation of built-in circular plates under impulsive load. J Mech Phys Solids 3(1): 22-37.

[27]  Ashani J, Ghamsari A (2008) Theoretical and experimental analysis of plastic response of isotropic circular plates subjected to underwater explosion loading. Materialwiss Werkstofftech 39(2): 171-175.

[28] Symonds PS, Wierzbicki T (1979) Membrane mode solutions for impulsively loaded circular plates. 46(1): 58-64.

[29] Teeling-Smith R, Nurick G (1991) The deformation and tearing of thin circular plates subjected to impulsive loads. Int J Impact Eng 11(1): 77-91.

[30]  Johnson W (1983) Impact strength of materials. Hodder Arnold Publishers, United Kingdom.

[31] Nurick G, Martin J (1989) Deformation of thin plates subjected to impulsive loading—a review part II: Experimental studies. Int J Impact Eng 8(2): 171-186.

[32] Rajendran R, Paik J, Lee J (2007) Of underwater explosion experiments on plane plates. Exp Tech 31(1): 18-24.

[33] Zhao YP (1998) Suggestion of a new dimensionless number for dynamic plastic response of beams and plates. Arch App Mech 68(7-8): 524-538.

[34] He Z, Chen Z, Jiang Y, Cao X, Zhao T, Li Y (2020) Effects of the standoff distance on hull structure damage subjected to near-field underwater explosion. Mar Struct 74: 102839.

[35] Koli S, Chellapandi P, Rao L B, Sawant A (2020) Study on JWL equation of state for the numerical simulation of near-field and far-field effects in underwater explosion scenario. Eng Sci Technol Int J 23(4): 758-768.

[36] Zhang S, Wang G, Wang C, Pang B, Du C (2014) Numerical simulation of failure modes of concrete gravity dams subjected to underwater explosion. Eng Fail Anal 36:49-64.

[37] Brar N, Joshi V, Harris B (2009) Constitutive model constants for Al7075‐t651 and Al7075‐t6. AIP Conf Proc (American Institute of Physics).

[38] Grązka M, Janiszewski J (2012) Identification of Johnson-Cook equation constants using finite element method. Eng Tr 60(3): 215-223.

[39] Ning J, Liang SY (2018) Model-driven determination of Johnson-Cook material constants using temperature and force measurements. Int J Adv Man Tec 97(1-4): 1053-1060.

[40] Sadraei MA, Khodarahmi H (2018) Experimental study and Numerical modelling of plastic deformation of rectangular plate subjected to impulsive loading. Faculty of Mechanical Engineering Faculty of Mechanical Engineering Specialization: Functional Design, University of Guilan 1:150.

[41] ABAQUS (2014) A. Documenaton, "ABAQUS/ EXAMPLE PROBLEMS GUIDE/VOL2.  2.

[42] Rajendran R, Narasimhan K (2001) Linear elastic shock response of plane plates subjected to underwater explosion. Int J Impact Eng 25(5): 493-506.

[43] Zamani J, Safari K, Ghamsari A, Zamiri A (2011) Experimental analysis of clamped AA5010 and steel plates subjected to blast loading and underwater explosion. J Str Ana Engi Des 46(3): 201-212.

[44] Ren P, Zhou J, Tian A, Zhang W, Huang W (2017) Experimental and numerical investigation of the dynamic behavior of clamped thin panel subjected to underwater impulsive loading. Lat Am J Solids Struct 14(6): 978-999.

[45] Schiffer A, Tagarielli VL, Petrinic N, Cocks AC (2012) The response of rigid plates to deep water blast: Analytical models and finite element predictions. J Appl Mech 79(6).

[46] Nariman-Zadeh N, Darvizeh A, Jamali A, Moeini A (2005) Evolutionary design of generalized polynomial neural networks for modelling and prediction of explosive forming process. J Mater Process Technol 164: 1561-1571.

[47] Heshmati M, Zamani A J, Mozafari A (2017) Experimental and numerical study of isotropic circular plates' response to underwater explosive loading, created by conic shock tube: Experimentelle und numerische Untersuchung zum Einfluss einer explosiven Belastung unter Wasser durch konische Stoßrohre auf isotrope runde Platten. Materialwiss Werkstofftech 48(2): 106-121.

[48] Zhang Z, Wang C, Wang L, Zhang A, Silberschmidt VV (2018) Underwater explosion of cylindrical charge near plates: analysis of pressure characteristics and cavitation effects. Int J Impact Eng 121: 91-105.

[49] Zhang J, Shi XH, Soares CG (2017) Experimental study on the response of multi-layered protective structure subjected to underwater contact explosions. Int J Impact Eng 100: 23-34.

[50] McShane G, Stewart C, Aronson M, Wadley H, Fleck N, Deshpande V (2008) Dynamic rupture of polymer–metal bilayer plates. Int J Solids Struct 45(16): 4407-4426.

[51] Dai LH, Wu C, An FJ, Liao SS (2018) Experimental investigation of polyurea-coated steel plates at underwater explosive loading. Adv Mater Sci Eng 2018.

[52] Li Y, Chen Z, Zhao T, Cao X, Jiang Y, Xiao D (2019) An experimental study on dynamic response of polyurea coated metal plates under intense underwater impulsive loading. Int J Impact Eng 133: 103361.

[53] Hung C, Hsu P, Hwang-Fuu J (2005) Elastic shock response of an air-backed plate to underwater explosion. Int J Impact Eng 31(2): 151-168.

[54] Taylor G (1963) The pressure and impulse of submarine explosion waves on plates. The scientific papers of GI Taylor 3: 287-303.

[55] Ramajeyathilagam K, Vendhan C (2004) Deformation and rupture of thin rectangular plates subjected to underwater shock. Int J Impact Eng 30(6): 699-719.

[56] Huang W, Jia B, Zhang W, Huang X, Li D, Ren P (2016) Dynamic failure of clamped metallic circular plates subjected to underwater impulsive loads. Int J Impact Eng 94: 96-108.

[57] Rajendran R, Narasimhan K (2000) Underwater shock response of circular HSLA steel plates. Shock Vib 7(4): 251-262.

[58] Hadavi V, Zamani J, Hosseini R (2009) The empirical survey on the effect of using media in explosive forming of tubular shells. W Aca Sci Eng Tech 60: 574-579.

[59] Iyama H, Itoh S (2016) Study on explosive forming of aluminum alloy. Int J Mult 4(4).

[60] Hadavi V, Zamani Ashani J, Mozaffari A (2012) Theoretical calculation of the maximum radial deformation of a cylindrical shell under explosive forming by a new energy approach. Proc Inst Mech Eng C J Mech 226(3): 576-584.

[61] Iyama H, Higa Y, Itoh S (2014) Study on the effects of shock wave propagation on explosive forming. Mater Sci Forum (Trans Tech Publ).

[62] Ruan L, Ezaki S, Masahiro F, Shen S, Kawamura Y (2016) Forming of magnesium alloy by underwater shock wave. J Magnesium Alloys 4(1): 27-29.

[63]  De Vuyst T, Kong K, Djordjevic N, Vignjevic R, Campbell J, Hughes K (2016) Numerical modelling of the effect of using multi-explosives on the explosive forming of steel cones. Journal of Physics: Conference Series (IOP Publishing).

[64] Nishi M, Sakaguchi H, Tanaka S, Iyama H, Fujita M (2018) Research on explosive forming of magnesium alloy plate using numerical simulation and experimental studies (I). Sci Technol Energetic Mater 79(5-6): 156-159.

[65] Praba RS, Ramajeyathilagam K (2020) Numerical investigations on the large deformation behaviour of ring stiffened cylindrical shell subjected to underwater explosion. Appl Ocean Res 101: 102262.

[66] Iyama H, Raghukandan K, Nagano S, Itoh S (2003) The effect of pressure vessel in explosive forming. ASME Pressure Vessels and Piping Conference.

[67] Mostofi TM, Babaei H, Alitavoli M (2016) Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates. Thin-Wall Struct 109: 367-376.

[68] Babaei H, Mirzababaie Mostofi T, Armoudli E (2017) On dimensionless numbers for the dynamic plastic response of quadrangular mild steel plates subjected to localized and uniform impulsive loading. P I Mech Eng E-J Pro 231(5): 939-950

[69] Mostofi TM, Golbaf A, Mahmoudi A, Alitavoli M, Babaei H (2018) Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform and localized impulsive loading. Thin-Wall Struct 123: 48-56.

[70] Gupta, NN (2021) Response of thin walled metallic structures to underwater explosion: A review. Int J Impact Eng 103950.