[2] Hans Lubbinge (1999) On the lubrication of mechanical face seals. Wiley.

[3] Karaszkiewicz (1985) Hydrodynamic lubrication of rubber seals for reciprocating motion: Leakage of seals with an o-ring. Tribol Int 21-26.

[4] Salant R (2001) Numerical models of rotary lip seal seals. Tribol Res 685-696.

[5] Susan, Salant R (2002) Inter-asperity cavitation and global cavitation in seals an average flow analysis. Tribol Int 113-121.

[6] Shen D, Salant R (2003) Elastohydrodynamic analysis of the effect of shaft surface finish on rotary lip seal behavior. Tribol Trans 6-46.

[7] Salant F, Rocke A (2004) Hydrodynamic analysis of the flow in radial lip seal using flow factors Transactions, ASME J Tribol 156-161.

[8] Rocke A, Salant, R (2005) Elastohydrodynamic analysis of a rotary lip seal using flow factors.  Tribol Trans 16-43.

[9] Jianjun S, Chenbo M, Qiuping Y, Jianhua L, Min Z, Peiya Z (2017) Numerical analysis on a new pump-out hydrodynamic mechanical seal. Tribol Int 62-70.

[11] Salant R, Shen D (2007) An unsteady mixed soft EHL model, with application to a rotary lip seal. Tribol Int 646-651.

[12] Ping Huang (2015) Numerical calculation of elastohydrodynamic lubrication. Methods and program, wiley.

[13] Jalali V, Rahnejat D (1998) Elastohydrodynamic solution for concentrated elliptical point contact of machine elements under combined entraining and squeeze-film motion. Department of Mechanical and Manufacturing Engineering.

[14] Nian X, Khonsari MM (2012) Thermal performance of mechanical seals with textured side-wall. Tribol Int 45(1): 1-7.

[15] Jia X, Guo F, Huang L, Salant R, Wang Y (2013) Parameter analysis of the radial lip seal by orthogonal array method. Tribol Int 64: 96-102

[16] Slawomir B (2015) An analytical approach to heat transfer and thermal distortions in non-contacting face seals. Int J Heat Mass Transf 81:90-102.

[17] Jérémy C (2018) Numerical and experimental study of misaligned and wavy mechanical face seals operating under pressure pulses and pressure inversions. Mechanical engineering.

[18] Ayadi K, Runetière B, Tournerie B, Maoui A (2015) Experimental and numerical study of the lubrication regimes of a liquid mechanical seal. Tribol Int 92: 96-108.

 [19] Liu Y, Liu W, Li Y, Liu X, Wang Y (2015) Mechanism of a wavy-tilt-dam mechanical seal under different Working conditions. Tribol Int 90: 43-54

[20] Migout F, Brunetière N, Tournerie B (2015) Study of the fluid film vaporization in the inter face of a mechanical face seal. Tribol Int 92: 84-95.