[1]. Brady, B.H., and Brown, E.T. (2006). Rock mechanics: for underground mining. Springer science & business media.

[2]. Mawdesley, C.A. (2002). Predicting rock mass cavability in block caving mines.

[3]. Brannon, C.A., Carlson, G.K., and Casten, T.P. (2011). Block Caving & Cave Mining. SME Mining Engineering Handbook, 1437-1450.

[4]. Rice, G. S. (1934). Ground movement from mining in Brier Hill mine, Norway, Michigan. Mining and Metallurgy. 15 (325): 12-14.

[5]. Panek, L.A. (1984). Subsidence in undercut-cave operations, subsidence resulting from limited extraction of two neighboring-cave operations. Geomechanical applications in hard rock mining, 225-240.

[6]. Beck, D., Sharrock, G., and Capes, G. (2011). A coupled DFE-Newtonian Cellular Automata scheme for simulation of cave initiation, propagation and induced seismicity. 45th US Rock Mechanics/Geomechanics Symposium. American Rock Mechanics Association.

[7]. Carlson, G., and Golden, R. (2008). Initiation, Growth, Monitoring and Management of the 7210 Cave at Henderson Mine---A Case Study. In 5th International Conference and Exhibition on Mass Mining (Vol. 9, pp. 97-106).

[8]. Ross, I., and Van As, A. (2005). Northparkes Mines-design, sudden failure, air-blast and hazard management at the E26 block cave. In 9th AusIMM Underground Operators Conference 2005 (Vol. 2005, No. 1, pp. 7-18). AUSTRALASIAN INST MINING & METALLURGY.

[9Someehneshin, J., Oraee-Mirzamani, B., and Oraee, K. (2015). Analytical model determining the optimal block size in the block caving mining method. Indian Geotechnical Journal. 45 (2): 156-168.

[10]. Rafiee, R., Ataei, M., and KhalooKakaie, R. (2015). A new cavability index in block caving mines using fuzzy rock engineering system. International Journal of Rock Mechanics and Mining Sciences, 77, 68-76.

[11]. Rafiee, R., Ataei, M., KhaloKakaie, R., Jalali, S. E., and Sereshki, F. (2016). A fuzzy rock engineering system to assess rock mass cavability in block caving mines. Neural Computing and Applications. 27 (7): 2083-2094.

[12]. Mathews, K.E, Hoek, E., Wyllie, D.C, and Stewart, S. (1981). Prediction of stable excavation spans for mining at depths below 1000 m in hard rock.

[13]. Tobie, R.L. and Julin, D. E. (1984). Block Caving: General Description in Underground Mining Methods Handbook, W. A. Hustrulid, ed., Soc. Mng. Enngr, New York, pp. 967–972.

[14]. Laubscher, D. (2000). Cave Mining Handbook.

[15]. Milne, D., Hadjigeorgiou, J., and Pakalnis, R. (1998). Rock mass characterization for underground hard rock mines. Tunnelling and underground space technology. 13 (4): 383-391.

[16]. Palma, R., and Agarwal, R. (1973). A study of the cavability of primary ore at the El Teniente Mine. Technical Report from Colombia University, New York.

[17]. Lorig, L. (2000). The Role of Numerical Modelling in Assessing Cavability. Itasca Consulting Group, Inc., Report to the International Caving Study. ICG00-099-3-16, October 22–25 (niepublikowane).

[18]. Brown, E.T. (2002). Block caving geomechanics.

[19]. Brown, E.T. (2003). Block Caving Geo-mechanics. The International Caving Study I. JKMRC Monograph Series in Mining and Mineral Processing 3. University of Queensland.

[20]. Pierce, M., Cundall, P., Potyondy, D., and Ivars, D.M. (2007, May). A synthetic rock mass model for jointed rock. In 1st Canada-US Rock Mechanics Symposium. OnePetro.

[21]. Ivars, D.M., Pierce, M.E., Darcel, C., Reyes-Montes, J., Potyondy, D.O., Young, R.P., and Cundall, P.A. (2011). The synthetic rock mass approach for jointed rock mass modelling. International Journal of Rock Mechanics and Mining Sciences. 48 (2): 219-244.

[22]. Sainsbury, B. (2012). A model for cave propagation and subsidence assessment in jointed rock masses. University of South Wales.

[23]. Woo, K.S., Eberhardt, E., Rabus, B., Stead, D., and Vyazmensky, A. (2012). Integration of field characterisation, mine production and InSAR monitoring data to constrain and calibrate 3-D numerical modelling of block caving-induced subsidence. International Journal of Rock Mechanics and Mining Sciences, 53, 166-178.

[24]. Rafiee, R., Ataei, M., KhalooKakaie, R., Jalali, S.E., Sereshki, F., and Noroozi, M. (2018). Numerical modeling of influence parameters in cavabililty of rock mass in block caving mines. International Journal of Rock Mechanics and Mining Sciences, 105, 22-27.

[25]. Xia, Z., Tan, Z., Pei, Q., and Wang, J. (2019). Ground pressure damage evolution mechanism of extraction level excavations induced by poor undercutting in block caving method. Geotechnical and Geological Engineering. 37 (5): 4461-4472.

[26]. Xia, Z., Tan, Z., and Miao, Y. (2020). Damage evolution mechanism of extraction structure during mining gently dipped orebody by block caving method. Geotechnical and geological engineering. 38 (4): 3891-3902.

[27]. Wang, J., Wei, W., Zhang, J., Mishra, B., and Li, A. (2020). Numerical investigation on the caving mechanism with different standard deviations of top coal block size in LTCC. International Journal of Mining Science and Technology. 30 (5): 583-591.

[28]. Mohammadi, S., Ataei, M., and Kakaie, R. (2018). Assessment of the importance of parameters affecting roof strata cavability in mechanized longwall mining. Geotechnical and Geological Engineering. 36 (4): 2667-2682.

[29]. McNearny, R.L., and Abel Jr, J.F. (1993, April). Large-scale two-dimensional block caving model tests. In International journal of rock mechanics and mining sciences & geomechanics abstracts (Vol. 30, No. 2, pp. 93-109). Pergamon.

[30]. Carmichael. P. and Hebblewhite. B. (2012). An investigation into semi-intact rock mass representation for physical modelling block caving mechanics’ zone. Mining education Australian Research projects review.

[31]. Cumming-Potvin, D., Wesseloo, J., Jacobsz, S. W., and Kearsley, E. (2016). Fracture banding in caving mines. Journal of the Southern African Institute of Mining and Metallurgy. 116 (8): 753-761.

[32]. Obert, L., E. (1973). Design and Stability of Excavation, Sec. 7 in SME Mining Engineering Handbook, A. B. Cummins and I. A. Given, Ed., Soc. Mng. Enngr, New York, p. 49.

[33]. Darling, P. (Ed.). (2011). SME mining engineering handbook (Vol. 1). SME.

[34]. Jakubec, J. and E. (2007). Use of the Mining Rock Mass Rating (MRMR) Classification, Proceedings of the International Workshop on Rock Mass Classification in Underground Mining, pp. 73–78.

[35]. Suorineni, F.T. (2010). The stability graph after three decades in use: experiences and the way forward. International journal of mining, Reclamation and Environment. 24 (4): 307-339.

[36]. Vakili, A., and Hebblewhite, B.K. (2010). A new cavability assessment criterion for longwall top coal caving. International Journal of Rock Mechanics and Mining Sciences. 47 (8): 1317-1329.

[37]. Brummer, R.K. (2005). The South African Institute of Mining and Metallurgy International Symposium on Stability of Rock Slopes in Open Pit Mining and Civil Engineering, pp. 411–420.

[38]. Gilbride, L.J., Free, K.S., and Kehrman, R. (2005, June). Modeling Block Cave Subsidence at the Molycorp, Inc., Questa Mine? A Case Study. In Alaska Rocks 2005, The 40th US Symposium on Rock Mechanics (USRMS). OnePetro.

[39]. Vyazmensky, A., Elmo, D., and Stead, D. (2010). Role of rock mass fabric and faulting in the development of block caving induced surface subsidence. Rock mechanics and rock engineering. 43 (5): 533-556.

 [40]. Montgomery, D.C. (2001). Design and analysis of experiments. John Wiley & Sons. Inc., New York, 1997, 200-1.

[41]. Kirmizakis, P., Tsamoutsoglou, C., Kayan, B., and Kalderis, D. (2014). Subcritical water treatment of landfill leachate: Application of response surface methodology. Journal of environmental management. 146: 9-15.

[42]. Sodeifian, G.H., Azizi, J., and Ghoreishi, S.M. (2014). Response surface optimization of Smyrnium cordifolium Boiss (SCB) oil extraction via supercritical carbon dioxide. The Journal of Supercritical Fluids. 95: 1-7.

[43]. Yuan, Z., Yang, J., Zhang, Y., and Zhang, X. (2015). The optimization of air-breathing micro direct methanol fuel cell using response surface method. Energy. 80: 340-349.

[44]. Asadizadeh, M., Moosavi, M., Hossaini, M.F., and Masoumi, H. (2018). Shear strength and cracking process of non-persistent jointed rocks: an extensive experimental investigation. Rock Mechanics and Rock Engineering. 51 (2): 415-428.

[45]. Heidarzadeh, S., Saeidi, A., and Rouleau, A. (2018). Assessing the effect of open stope geometry on rock mass brittle damage using a response surface methodology. International Journal of Rock Mechanics and Mining Sciences, 106, 60-73.

[46]. Rastbood, A., Gholipour, Y., and Majdi, A. (2017). Finite element-based response surface methodology to optimize segmental tunnel lining. Engineering, Technology & Applied Science Research. 7 (2): 1504-1514.

[47]. Asadizadeh, M., Moosavi, M., and Hossaini, M.F. (2018). Investigation of the mechanical behaviour of non-persistent jointed blocks under uniaxial compression. Geomech. Eng. 14 (1): 29-42.

[48]. Miller, D.M. (1984). Reducing transformation bias in curve fitting. The American Statistician. 38 (2): 124-126.