[1]  Mehta NK (2012) Machine Tool Design & Numerical Control. Tata McGraw Hill Education, India.

[2] Nategh MJ (2012) Machine tools jig and fixture design. Tarbiat Modares University Press, Tehran.

[3]  Satyanarayana S, Melkote S (2004) Finite element modeling of fixture–workpiece contacts: single contact modeling and experimental verification. Int J Mach Tools Manuf 44: 903–913.

[4] Parvaz H, Nategh MJ (2013) A pilot framework developed as a common platform integrating diverse elements of computer aided fixture design. Int J Prod Res 51: 6720–6732.

[5] Nategh MJ, Parvaz H (2018) Development of computer aided clamping system design for workpieces with freeform surfaces. Comput Aided Des 95: 52–61.

[6] Parvaz H, Nategh MJ (2018) Development of locating system design module for freeform workpieces in computer-aided fixture design platform. Comput Aided Des 104: 1–14.

[7] Hoffman EG (2004) Jig and Fixture Design, Fifth edn. Delmar Cengage Learning, New York.

[8] Siebenaler SP, Melkote SN (2006) Prediction of workpiece deformation in a fixture system using the finite element method. Int J Mach Tools Manuf 46: 51–58.

[9] Gameros A, Lowth S, Axinte D, Nagy-Sochacki A, Craig O, Siller HR (2017) State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review. Int J Mach Tools Manuf 123: 1–21.

[10] Aoyama T, Kakinuma Y (2005) Development of fixture devices for thin and compliant workpieces. CIRP Ann 54: 325–328

[11] Raffles MH, Kolluru K, Axinte D, Llewellyn-Powell H (2013) Assessment of adhesive fixture system under static and dynamic loading conditions. Proc Inst Mech Eng Part B J Eng Manuf 227: 267–280.

[12] Mironova A, Mercorelli P, Zedler A (2016) Robust control using sliding mode approach for ice-clamping device activated by thermoelectric coolers. IFAC-PapersOnLine 49(25): 470–475.

[13] Mironova A (2018) Effects of the influence factors in adhesive workpiece clamping with ice: experimental study and performance evaluation for industrial manufacturing applications. Int J Adv Manuf Technol 99: 137–160.

[14] Chou Y-C, Chandru V, Barash MM (1989) A Mathematical Approach to Automatic Configuration of Machining Fixtures: Analysis and Synthesis. J Eng Ind 111: 299–306.

[15] Lee SH, Cutkosky MR (1991) Fixture Planning With Friction. J Eng Ind 113: 320–327.

[16] Kang Y, Rong Y, Yang JC (2003) Computer-Aided Fixture Design Verification. Part 3. Stability Analysis. Int J Adv Manuf Technol 21: 842–849.

[17] Parvaz H (2020) Analytical and Numerical Investigation of Reaction Forces in Fixturing of Rigid Workpiece with Polyhedral Geometry. J Solid Fluid Mech 10:17–29.

[18] Parvaz H, Mahdavi M, Sepehry N (2020) Experimental investigation of the jamming phenomenon in fixturing of workpiece using the peg-in-hole mechanism. Solid Fluid Mech 10: 77–89.

[19] Parvaz H, Sepehry N, Yazdi MK (2020) Theoretical and experimental analysis of jamming of workpiece in the fixture by using the block and palm study. Solid Fluid Mech 10:45–58

[20] Ventsel E, Krauthammer T (2001) Thin plates and shells: theory, analysis and applications. CRC Press, Dekker, Abingdon

[21] Timoshenko S, Woinowsky-Krieger S (1987) Theory of plates and shells, Second edn. McGraw-Hill, United States

[22] Zhang J, Liu S, Ullah S, Gao Y (2020) Analytical bending solutions of thin plates with two adjacent edges free and the others clamped or simply supported using finite integral transform method. Comput Appl Math 39: 266-278.

[23] Marks CR (1941) The Analysis of Cantilever Plates with Concentrated Loads. PhD thesis, University of Tennessee.