[1] Kundu S, Sam S (2013) Diffusion Bonding of Microduplex Stainless Steel and Ti Alloy with and without Interlayer: Interface Microstructure and Strength Properties. Metall Mater Trans A 45: 371-383.

[2] Kundu S, Thirunavukarasu G (2016) Structure and properties correlation of diffusion bonded joint of duplex stainless steel and Ti–6Al–4V with and without Ni–17Cr–9Fe alloy interlayer. Int Inst Weld 73: 533-549.

[3] Thirunavukarasu G (2014) Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of diffusion-bonded joint between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material. J Mater Sci 45: 2067- 2088.

[4] Muthupandi V, Muralimuhan CH (2014) Properties of friction welding titanium-stainless steel joints with a nickel interlayer. Procedia Mater Sci 5: 1120 -1129.

[5] Muralimuhan CH, Ashfaq M, Ashiri R, Muthupandi V,  Sivaprasad K (2016) Analysis and characterization of the tole of Ni interlayer in the friction welding of titanium and 304 austenitic stainless steel. Metall Mater Trans A 47: 347–359.

[6] Pardal G, Ganguly S, Williams S, Vaja J (2015) Dissimilar metal joining of stainless steel and titanium using copper as transition metal. Procedia Mater Sci 5: 1150 – 1159.

[7] Kundu S (2011) Interface microstructure and strength properties of Ti64 and microduplex stainless steel diffusion bonded joints. Mater Des 32: 2997-3003.

]8[  شجاعی زوارم ع (1391) جوشکاری غیرهمجنس آلیاژ حافظه دار نایتینول به Ti6Al4V با استفاده از لیزر ضربانی Nd:YAG وبررسی خواص اتصال. پایان نامه کارشناسی ارشد، دانشگاه تهران.

[9] Shiue RK, Wu SK, Chan CH, Huang CS (2006)  Infrared brazing of Ti–6Al–4V and 17-4PH stainless steel with a nickel barrier layer. Metall Mater Trans A 37: 2207–2217

[10] Ghosh M, Chatterjee S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Mater Charact 54: 327– 337

[11] He P, Zhang J, Zhou R, Li X (1999) Diffusion bonding technology of a titanium alloy to a stainless steel web with a Ni interlayer. Mater Charact 43: 287-292.

[12] Kundu S, Mishra B, Olson DL, Chatterjee S (2013) Interfacial reactions and strength properties of diffusion bonded joints of Ti64 alloy and 17-4PH stainless steel using nickel alloy interlayer. Mater Des 51: 714–722.

[13] Sam S, Kundu S, Chatterjee S (2012) Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties. Mater Des 40: 237-244.

[14]Kundu S, Sam S, Mishra B, Chatterjee S (2014) Diffusion Bonding of Microduplex Stainless Steel and Ti Alloy with and without Interlayer: Interface Microstructure and Strength Properties. Metall Mater Trans A 45: 371–383.

[15] Vigraman T (2021) Liquid-solid phase reaction products formation in the diffusion welded joints made between Ti-6Al-4 V and AISI304L with brass interlayer. Mater Today: Proc 42(2): 607-617.

[16] Kumar R, Balasubramanian M (2020) Analysis and comparison of diffusion bonded and friction welded Ti-6Al-4V and stainless steel joints with copper as interlayer. Mater. Today: Proc 21(3): 1467-1473.

[17] Ranjan Kumar R, Kumar Gupta Rohit, Sarkar A, Prasad MJNV (2022) Vacuum diffusion bonding of α‑titanium alloy to stainless steel for aerospace applications: Interfacial microstructure and mechanical characteristics. Mater Charact 183: 111607.

[18] Atasoy E, Kahramanb N (2008) Diffusion bonding of commercially pure titanium to low carbon steel using a silver interlayer. Mater Charact 59: 1481-1490.

[19] Kundu S, Ghosh M, Laik A, Bhanumurthy K, Kale GB, Chatterjee S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer.  Mater Sci Eng A 407:154–160.

[20] Surendar A, Lucas A, Abbas M, Rahim R, Salmani M (2019) Transient liquid phase bonding of stainless steel 316 L to Ti-6Al-4 V using Cu/Ni multi-interlayer: microstructure, mechanical properties, and fractography. Weld word 63: 1025-1032.

[21] Lison R, Stelzer J (1979) Diffusion Welding of Reactive and Refractory Metals to Stainless Steel. Weld J 59: 306- 314.

[22] Grigor evskii VI (1986) Kinetics of formation of the joint in diffusion bonding titanium alloys. J Weld Prod 33: 36-37.