Identifying and Prioritizing Factors Affecting Bursting of Dump Truck Tires in Mines using Fuzzy Best-Worst Method | ||
| Journal of Mining and Environment | ||
| مقاله 19، دوره 13، شماره 4، دی 2022، صفحه 1225-1237 اصل مقاله (704.68 K) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2022.12429.2257 | ||
| نویسندگان | ||
| Mahdi Malakoutikhah1؛ Hamed Nezafat2؛ Masoud Ashoogh2؛ Erfan Hayati2؛ Hosein Mirzamohammadi2؛ Valiallah Karimi Gogheri2؛ Hadiseh Rabiei* 1 | ||
| 1Department of Occupational Health Engineering, School of Health, Kashan University of Medical Sciences, Kashan, Iran | ||
| 2Golgohar Mining and Idustrial Compony, HSE Department, Sirjan, Iran | ||
| چکیده | ||
| Due to the high number and severity of tire burst accidents of dump trucks, the present work is conducted to identify and prioritize the effective causes of dump truck tire bursts using the fuzzy best-worst method (FBMW). The present work is conducted using content analysis and FBMW. First, by using focus groups and exploring the texts and events, and then these factors are weighted and then prioritized using FBMW. The results of the first phase show that the factors affecting the bursting of dump truck tires can be classified into 5 main categories of road conditions (six sub-categories), maintenance (six sub-categories), monitoring, and inspection (10 sub-categories), unsafe behavior (seven sub-categories), and tire conditions (five sub-categories). The results of the second phase also show that the tire conditions and unsafe behavior are the most important factors with a mean weight of 0.2252 and 0.1681, respectively. The results of the present work show that the most important cause is the monitoring of temperature, pressure, and tire conditions. Therefore, it can be concluded that in order to reduce these accidents, in addition to choosing the right tire, the conditions such as temperature and pressure inspection should be given a high attention. | ||
| کلیدواژهها | ||
| Dump truck؛ Mine؛ Fuzzy best-worst method؛ Content analysis؛ Accidents | ||
| مراجع | ||
|
[1]. Dubinkin, D. (2019). Current state of engineering and technology in the field of autonomous traffic control of coal mine vehicles. Mining Equipment and Electromechanics, 6, 8-15.
[2]. Dubinkin, D. Kulpin, A. and Stenin, D. (2020). Justification of the Number and Type of Tire Size for a Dump Truck with a Lifting Capacity from 90 to 130 Tons. E3S Web of Conferences.
[3]. Torabi, M. and Pas, M. (2019). Investigating the main causes of dump truck accidents using the fish-bone model in one of the open-pit mines National Conference on Safety, Health, and Environment.
[4]. Feng, Q.D. Shuai, J. Yin, Y.J. and Jiao, Z.L. (2012). The Safety Monitoring Warning System of Mining Dump Truck. Advanced Materials Research.
[5]. Ruff, T. (2006). Evaluation of a radar-based proximity warning system for off-highway dump trucks. Accident Analysis & Prevention. 38 (1): 92-8.
[6]. Mc.Cann, M. and Cheng, M.T. (2012). Dump truck‐related deaths in construction, 1992–2007. American journal of industrial medicine. 55 (5): 450-7.
[7]. Safety M. Health Administration (MSHA). (2007). Fatal alert bulletins, fatal grams, and fatal investigation reports 1999–2003, Data files available at http://www msha gov/fatals/fab htm.
[8]. Li, Y. Liu, W. and Frimpong, S. (2012). Effect of ambient temperature on stress, deformation and temperature of dump truck tire. Engineering Failure Analysis, 23, 55-62.
[9]. Wang, H. Al-Qadi, IL. Stanciulescu, I. (2012). Simulation of tyre–pavement interaction for predicting contact stresses at static and various rolling conditions. International Journal of Pavement Engineering, 13(4): 310-21.
[10]. Nyaaba, W. (2017). Thermomechanical Fatigue Life Investigation of an Ultralarge Mining Dump Truck Tire: Missouri University of Science and Technology.
[11]. Year, G. (1998). Tire Maintenance Manual. Off-The-road, website: www goodyearotr com/cfmx/web/otr/info/pdf/otr_MaintenanceManual pdf.
[12]. Kecojevic, V. Komljenovic, D. Groves, W. and Radomsky, M. (2007). An analysis of equipment-related fatal accidents in US mining operations: 1995–2005. Safety science. 45 (8): 864-74.
[13]. Haq, MT. Zlatkovic, M. and Ksaibati, K. (2020). Assessment of tire failure related crashes and injury severity on a mountainous freeway: Bayesian binary logit approach. Accident Analysis & Prevention, 145, 105-113.
[14]. Zhang, M. Kecojevic, V. and Komljenovic, D. (2014). Investigation of haul truck-related fatal accidents in surface mining using fault tree analysis. Safety science, 65, 106-117.
[15]. Drury, C.G. Porter, W.L. and Dempsey, P.G. (2012). Patterns in mining haul truck accidents. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, SAGE Publications Sage CA: Los Angeles, CA.
[16]. Pascual, R. Román, M. López-Campos, M. Hitch, M. and Rodovalho, E. (2019). Reducing mining footprint by matching haul fleet demand and route-oriented tire types. Journal of Cleaner Production, 227, 645-651.
[17]. Kansake, BA. Frimpong, S. (2020). Analytical modelling of dump truck tire dynamic response to haul road surface excitations. International Journal of Mining, Reclamation and Environment: 34 (1): 1-18.
[18]. Mirzaei Aliabadi, M. Aghaei, H. Kalatpour, O. Soltanian, AR. Nikravesh, A. (2020). Analysis of human and organizational factors that influence mining accidents based on Bayesian network. International journal of occupational safety and ergonomics: 26 (4): 670-677.
[19]. Malakoutikhah, M. Jahangiri, M. Alimohammadlou, M. Faghihi, S.A. Kamalinia, M. (2021). The Factors Affecting Unsafe Behaviors of Iranian Workers: A Qualitative Study Based on Grounded Theory. Safety and Health at Work.
[20]. Aliabadi, MM. Aghaei, H. Kalatpour, O. Soltanian, AR. SeyedTabib, M. (2018). Effects of human and organizational deficiencies on workers’ safety behavior at a mining site in Iran. Epidemiology and health, 40.
[21]. Khosaravi, M. Dabiri, R. (2020). Evaluation of heavy metal contamination in soil and water resources around Taknar copper mine (NE Iran). Iranian Journal of Earth Sciences. 12 (3): 212-222.
[22]. Strauss, A. Corbin, J. (1998). Basics of qualitative research techniques.
[23]. Corbin, JM. Strauss, A. (1990). Grounded theory research: Procedures, canons, and evaluative criteria. Qualitative sociology. 13 (1): 3-21.
[24]. Malakoutikhah, M. Alimohammadlou, M. Jahangiri, M. Rabiei, H. Faghihi, S.A. Kamalinia, M. (2022). Modeling the factors affecting unsafe behaviors using the fuzzy best–worst method and fuzzy cognitive map. Applied Soft Computing, 114, 108-119.
[25]. Malakoutikhah, M. Kazemi, R. Rabiei, H. Alimohammadlou, M. Zare, A. Hassanipour, S. (2021). Comparison of mental workload with N-Back test: A new design for NASA-task load index questionnaire. International Archives of Health Sciences. 8 (1): 7-13.
[26]. Zhou, J. (2007). Investigation into the improvement of tire management practices: University of British Columbia.
[27]. Anzabi, RV. Nobes, D. Lipsett, M. (2012). Haul truck tire dynamics due to tire condition. Journal of Physics: Conference Series, IOP Publishing.
[28]. Frimpong, S. Galecki, G. Li, Y. Suglo, R. (2012). Dump truck tire stress simulation for extended service life. Transactions of the Society for Mining, Metallurgy, and Exploration, 332, 422-429.
[29]. Rahimdel, MJ. (2022). Residual lifetime estimation for the mining truck tires. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering.
[30]. Trivisonno, N. (1970). Thermal analysis of a rolling tire. SAE Technical Paper, 0148-7191.
[31]. Kawano, M. (2019). Changing resource-based manufacturing industry: The case of the rubber industry in Malaysia and Thailand. Emerging States at Crossroads: Springer, Singapore, 145-162.
[32]. Kainradl, P. Kaufmann, G. (1976). Heat generation in pneumatic tires. Rubber Chemistry and Technology. 49 (3): 823-861. | ||
|
آمار تعداد مشاهده مقاله: 555 تعداد دریافت فایل اصل مقاله: 559 |
||