Numerical Analysis of Square and Circular Skirted Footings Placed on Sand using PLAXIS 3D Software | ||
| Journal of Mining and Environment | ||
| مقاله 9، دوره 13، شماره 4، دی 2022، صفحه 1049-1066 اصل مقاله (2.19 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2022.12458.2261 | ||
| نویسندگان | ||
| Gaurav Juneja* 1؛ Ravi Kumar Sharma2 | ||
| 1National Institute of technology Hamirpur, Himachal Pradesh, India | ||
| 2Department of Civil Engineering, National Institute of Technology, Hamirpur, Himachal Pradesh, India | ||
| چکیده | ||
| This paper presents the numerical analysis of square and circular skirted footings placed on different sands using the PLAXIS 3D software. The numerical analysis is done using the Mohr-coulomb (M-C) yield criteria. The size of the footings is considered as 100 mm for both the square and circular footings. The three different friction angles (Ø) of sand 36˚, 40˚, and 42˚ are used to study the effect of sand compactness. The depth of the skirt (h) varies from 0B to 2B (B is the width of the footing). The surface roughness between skirt-sand and footing-sand is considered partially rough and completely rough. The interface friction factor (δ) for a partially rough and fully rough interface is taken as 2/3Ø and Ø. All the tests are conducted by applying a prescribed displacement (s/B) of 20% of the footing size. The results obtained from the present work reveal that the inclusion of structural skirts with the footings appreciably increases the bearing capacity and reduces the settlement of the footing by increasing the skirt depth. The results obtained show that the skirted footing is found to be more effective in loose sand compared to dense sand in increasing the bearing capacity. The numerical analysis results are also verified with the experimental results available in the literature and multiple regression model. This work shows that the prediction of the accuracy of the results is quite good with the experimental results and the generated regression model. | ||
| کلیدواژهها | ||
| Numerical analysis؛ PLAXIS؛ skirted footing؛ Mohr-coulomb؛ bearing capacity | ||
| مراجع | ||
|
[1]. Bransby, M.F. and Randolph, M.F. (1998). Combined loading of skirted foundations. Géotechnique. 48 (5): 637-55.
[2]. Villalobos, F. (2007). Bearing capacity of skirted foundations in sand. InVI Congreso Chileno de Geotecnia, Valparaiso, 1-14.
[3]. Yun, G. and Bransby, M.F. (2007). The undrained vertical bearing capacity of skirted foundations. Soils and foundations. 47 (3): 493-505.
[4]. Al-Aghbari, M.Y. and Mohamedzein, Y.E. (2020). The use of skirts to improve the performance of a footing in sand. International Journal of Geotechnical Engineering. 14 (2): 134-41.
[5]. Mahmood, M.R., Fattah, M.Y., and Khalaf, A. (2020). Experimental investigation on the bearing capacity of skirted foundations on submerged gypseous soil. Marine Georesources and Geotechnology. 38 (10): 1151-62.
[6]. Al-Aghbari, M.Y. and Mohamedzein, Y. (2004). Bearing capacity of strip foundations with structural skirts. Geotechnical and Geological Engineering. 22 (1): 43-57.
[7]. Al-Aghbari, M.Y. and Mohamedzein, Y.A. (2006). Improving the performance of circular foundations using structural skirts. Proceedings of the Institution of Civil Engineers-Ground Improvement. 10 (3): 125-32.
[8]. Al-Aghbari, M.Y. and Dutta, R.K. (2008). Performance of square footing with structural skirt resting on sand. Geomechanics and Geoengineering: An International Journal. 3 (4): 271-7.
[9]. El Wakil, A.Z. (2010). Horizontal capacity of skirted circular shallow footings on sand. Alexandria Engineering Journal. 49 (4): 379-85.
[10]. Sajjad, G. and Masoud, M. (2018). Study of the behaviour of skirted shallow foundations resting on sand. International Journal of Physical Modelling in Geotechnics. 18 (3): 117-30.
[11]. Eid, H.T., Alansari, O.A., Odeh, A.M., Nasr, M.N., and Sadek, H.A. (2009). Comparative study on the behaviour of square foundations resting on confined sand. Canadian geotechnical journal. 46 (4): 438-53.
[12]. Wakil, A.Z. (2013). Bearing capacity of skirt circular footing on sand. Alexandria Engineering Journal. 52 (3): 359-64.
[13]. Eid, H.T. (2013). Bearing capacity and settlement of skirted shallow foundations on sand. International Journal of Geomechanics, 2013. 13 (5): 645-52.
[14]. Khatri. V.N., Debbarma, S.P., Dutta, R.K., and Mohanty, B. (2017). Pressure-settlement behavior of square and rectangular skirted footings resting on sand. Geomechanics and Engineering. 12 (4): 689-705.
[15]. Gnananandarao, T., Khatri, V.N., and Dutta, R.K. (2018). Performance of multi-edge skirted footings resting on sand. Indian Geotechnical Journal. 48 (3): 510-9.
[16]. Thakur, A. and Dutta, R.K. (2020). Experimental and numerical studies of skirted hexagonal footings on three sands. SN Applied Sciences. 2 (3): 1-1.
[17]. Thakur, A. and Dutta, R.K. (2020). A study on bearing capacity of skirted square footings on different sands. Indian Geotechnical Journal. 50 (6): 1057-73.
[18]. Azzam, W.R. and Farouk, A. (2020). Experimental and numerical studies of sand slopes loaded with skirted strip footing. Electronic Journal of Geotechnical Engineering. 15 (1): 795-812.
[19]. Shukla, R.P. (2022). Bearing capacity of skirted footing subjected to inclined loading. Magazine of Civil Engineering. 110 (2): 11012.
[20]. Nazeer, S. and Dutta, R.K. (2021). Bearing capacity of embedded and skirted E-shaped footing on layered sand. Journal of Achievements in Materials and Manufacturing Engineering. 108 (1).
[21]. Ghazavi, M. and Mokhtari, S. (2008). Numerical investigation of load-settlement characteristics of multi-edge shallow foundations. InProceedings of the 12th International Conference of International Association for Computer Methods and Advances in Geomechanics, Goa.
[22]. Khatri, V.N. and Kumar J. (2019). Finite-element limit analysis of strip and circular skirted footings on sand. International Journal of Geomechanics. 19 (3): 06019001.
[23]. Beygi, M., Vali, R., and Keshavarz, A. (2022). Pseudo-static bearing capacity of strip footing with vertical skirts resting on cohesionless slopes by finite element limit analysis. Geomechanics and Geoengineering. 17 (2): 485-98.
[24]. Barari, A., Ghaseminejad, V., and Ibsen, L.B. (2021). Failure envelopes for combined loading of skirted foundations in layered deposits. Journal of Waterway, Port, Coastal, and Ocean Engineering, 147(4): 04021008.
[25]. Acharyya, R. (2021). Assessment of overall response of interacting skirted strip footings located on layered soil. Sādhanā. 46 (1): 1-4.
[26]. Bowles, J.E. (1977). Foundation analysis and design. New York.
[27]. Bowles, J.E. (1988). Foundation analysis and design.
[28]. IS 6403. (1981). Code of practice for determination of breaking capacity of shallow foundations. Bureau of Indian Standard. New Delhi.
[29]. Bolton, M.D. (1986). The strength and dilatancy of sands. Geotechnique. 36 (1): 65-78.
[30]. Kulhawy, F.H. and Mayne, P.W. (1990). Manual on estimating soil properties for foundation design, Electric Power Research Institute. Palo Alto, USA.
[31]. Sarfarazi, V., Tabaroei, A., and Asgari, K. (2022). Discrete element modelling of strip footing on geogrid-reinforced soil. Geomechanics and Engineering. 29 (4): 435-449.
[32]. Tabaroei, A., Sarfarazi, V., Pouraminian, M., and Mohammadzadeh, D. (2022). Evaluation of Behavior of a Deep Excavation by Three-dimensional Numerical Modeling. Periodica Polytechnica Civil Engineering. 66 (3): 967-977.
[33]. Yaylaci, M. (2022). Simulate of edge and an internal crack problem and estimation of stress intensity factor through finite element method. Advances in nano-research. 12 (4): 405-414.
[34]. Terzaghi, K. (1943). Theoretical soil mechanics. Wiley, New York.
[35]. Meyerhof, G.G. (1963). Some recent research on the bearing capacity of foundations. Canadian geotechnical journal. 1 (1): 16-26.
[36]. Hansen, J.B. (1970). A Revised and Extended Formula for Bearing Capacity. Copenhagen: Danish Geotechnical Institute, 5–11.
[37]. Vesić, A.S. (1973). Analysis of ultimate loads of shallow foundations. Journal of the Soil Mechanics and Foundations Division. 99 (1): 45-73.
[38]. Fakher, A. and Jones, C.J. (1996). Discussion: bearing capacity of rectangular footings on geogrid-reinforced sand. Journal of Geotechnical Engineering. 122 (4): 326-7.
[39]. Wood, D.M. (2004). Geotechnical modelling. Abingdon, UK. | ||
|
آمار تعداد مشاهده مقاله: 749 تعداد دریافت فایل اصل مقاله: 768 |
||