• Ledezma-Ramirez, D. F., Ferguson, N. S., & Brennan, M. J. (2012). An experimental switchable stiffness device for shock isolation. J. Sound Vib., 331(23), 4987-5001.
• Park, K. S., Lim, S., Park, Y. P., Chang, Y. B., & Park, N. C. (2012). Shock and vibration isolation of laptop hard disk drive using rubber mount. Microsyst. Technol., 18(9), 1559-1566.
• Fulcher, B. A., Shahan, D. W., Haberman, M. R., Conner Seepersad, C., & Wilson, P. S. (2014). Analytical and experimental investigation of buckled beams as negative stiffness elements for passive vibration and shock isolation systems. J Vib Acoust, 136(3).
• Deng, C., Mu, D., Jia, X., & Li, Z. (2016). Effects of rubber shock absorber on the flywheel micro vibration in the satellite imaging system. Photonic Sens., 6(4), 372-384.
• Tapia-González, P. E., & Ledezma-Ramírez, D. F. (2017). Experimental characterisation of dry friction isolators for shock and vibration. J LOW FREQ NOISE V A, 36(1), 83-95.
• Ismail, M. I., & Ferguson, N. S. (2017). Passive shock isolation utilising dry friction. Shock. Vib., 2017.
• Jung, B. H., Kim, Y. W., Lee, J. R., & Kim, D. S. (2019). Visualization of pyroshock wave reduction by insulator using a laser shock based simulation method.  Measurement, 137, 302-311.
• Cao, X., Wei, C., Liang, J., & Wang, L. (2019). Design and dynamic analysis of metal rubber isolators between satellite and carrier rocket system. Mech. Sci., 10(1), 71-78.
• Yue, K., Wang, F., Zhang, H., & Li, S. (2019, November). Design and Experiment of Vibration Reduction Scheme for Sensitive Detectors Based on Random Vibration. In IOP Conference Series: Materials Science and Engineering (Vol. 688, No. 3, p. 033085). IOP Publishing.

[10] Wu, Y., Jiang, L., Bai, H., Lu, C., & Li, S. (2019). Mechanical behavior of entangled metallic wire materials under quasi-static and impact loading. Materials, 12(20), 3392.

[11] Ding, J., Zhao, H., Wang, J., Sun, Y., & Chen, Z. (2020). Numerical and experimental investigation on the shock mitigation of satellite-rocket separation. Aerosp Sci Technol, 96, 105538.

[12] Park, H. S., Hwang, D. H., Han, J. H., & Yang, J. (2020). Development of shock-absorbing insert for honeycomb sandwich panel. Aerosp Sci Technol, 104, 105930.

[13] Yan, H., Qin, Z., Chu, F., Zhang, W., Yang, Z., Ming, A., & Wang, X. (2020). Dynamic response of aluminum honeycomb panels to high-frequency laser shock excitations. J Spacecr Rockets, 57(1), 198-201.

[14] Xixiong, W. A. N. G., Tao, Y. U., Huipeng, Y. A. N., Jifeng, D. I. N. G., Zhen, L. I., Zhaoye, Q. I. N., & Fulei, C. H. U. (2021). Application of stress wave theory for pyroshock isolation at spacecraft-rocket interface. Chinese J. Aeronaut., 34(8), 75-86.

 

[15] Hui, A. M., Yan, M., Zhang, L., Jin, Y. L., Wang, K., & Liu, H. (2021). Shock Characteristics of the Opposed Disc Springs (ODS) Shock Isolator with Pretightening under Boundary Friction Condition. Shock. Vib., 2021.

[16] Askari, AR, Lenci, S. Size-dependent response of electrically pre-deformed micro-plates under mechanical shock incorporating the effect of packaging, a frequency-domain analysis, Journal of the Brazilian Society of Int. J. Mech. Sci.. 43 (2021) 1-21.

[17] Younis, MI, Jordy, D, Pitarresi, JM. Computationally efficient approaches to characterize the dynamic response of microstructures under mechanical shock, J Micromech Microeng. 16 (2007) 628-38.

[18] Lee, D. O., Han, J. H., Jang, H. W., Woo, S. H., & Kim, K. W. (2010). Shock response prediction of a low altitude earth observation satellite during launch vehicle separation. Int. J. Aeronaut. Space Sci., 11(1), 49-57.