Numerical Simulation of Piled-Raft Foundation in Cohesionless Soil using ABAQUS | ||
Journal of Mining and Environment | ||
مقاله 9، دوره 14، شماره 4، دی 2023، صفحه 1183-1203 اصل مقاله (2.95 M) | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22044/jme.2023.13324.2448 | ||
نویسندگان | ||
Zehra Khan؛ Abhishek Sharma* | ||
Civil Engineering Department, Chandigarh University, Mohali, Punjab, India. | ||
چکیده | ||
Due to rapid growth in infrastructure sector, the construction of high-rise buildings is becoming very popular among all the countries. Engineers face significant issues with high rise buildings, particularly in terms of structural and foundation aspects. Many old design approaches can't be used with certainty since they involve extrapolation far beyond the domains of existing experience, hence structural and geotechnical engineers are being compelled to use more advanced analysis and design methodologies. The current study is an attempt to predict the bearing capacity and settlement behavior of piled-raft footing when embedded into cohesionless deposit. The numerical analysis has been carried out to examine the effect of numerous key parameters of pile and raft such as pile length (10, 15, 20 m), pile diameter (0.3, 0.4, 0.5 m), pile number (16, 20, 24), pile spacing (2D, 3D, 4D) (where “D” is diameter of the pile), raft thickness (0.4, 0.5, 0.6 m), and angle of internal friction of soil (25°, 30°, 35°) on load-settlement behavior of the piled- raft foundation using ABAQUS software. A constant spacing between the piles, i.e. 3D was used throughout the analysis. The results of numerical investigation revealed an improvement in bearing capacity and a reduction in settlement value on increasing length, diameter and number of piles and also with increasing angle of internal friction. The current study not only increases the bearing capacity of the foundation but provides a cost-effective foundation technique to engineers. | ||
کلیدواژهها | ||
Piled-raft foundation؛ Settlement؛ Numerical Analysis؛ Load carrying capacity | ||
مراجع | ||
[1]. de Sanctis, L., & Mandolini, A. (2006). Bearing capacity of piled rafts on soft clay soils. Journal of Geotechnical and Geoenvironmental Engineering, 132(12), 1600-1610.
[2]. Lee, J., Kim, Y., & Jeong, S. (2010). Three-dimensional analysis of bearing behavior of piled raft on soft clay. Computers and Geotechnics, 37(1-2), 103-114.
[3]. Mali, S., & Singh, B. (2018). Behavior of large piled-raft foundation on clay soil. Ocean Engineering, 149, 205-216.
[4]. Oh, E. Y., Bui, Q. M., Surarak, C., & Balasurbamaniam, A. S. (2009, July). Investigation of the behavior of piled raft foundations in sand by numerical modeling. In ISOPE International Ocean and Polar Engineering Conference (pp. ISOPE-I). ISOPE.
[5]. Al-Mosawi, M. J., Fattah, M. Y., & Al-Zayadi, A. A. (2011). Experimental observations on the behavior of a piled raft foundation. Journal of Engineering, 17(4), 1-11.
[6]. Patil, J. D., Vasanvala, S. A., & Solanki, C. H. (2016). An experimental study on behaviour of piled raft foundation. Indian Geotechnical Journal, 46, 16-24.
[7]. Al Masoodi, R. S., Al Gharrawi, A. M., and Hussein, H. H. (2021, August). The behaviour of piled raft foundation in loose sandy soil. In Journal of Physics: Conference Series (Vol. 1973, No. 1, p. 012208). IOP Publishing.
[8]. Wulandari, P. S., & Tjandra, D. (2015). Analysis of piled raft foundation on soft soil using PLAXIS 2D. Procedia Engineering, 125, 363-367.
[9]. Rasheed, A. H., Qasim, O. A., & Al-Quraishy, Q. A. (2020, March). Behavior of pile rafts with raft size, number of piles and different pile length. In AIP Conference Proceedings (Vol. 2213, No. 1). AIP Publishing.
[10]. Halder, P. and Manna, B. (2022). Performance evaluation of piled rafts in sand based on load-sharing mechanism using finite element model. International Journal of Geotechnical Engineering, 16(5), 574-591.
[11]. Deb, P., & Pal, S. K. (2022). Structural and geotechnical aspects of piled raft foundation through numerical analysis. Marine Georesources & Geotechnology, 40(7), 823-846.
[12]. Niraula, S., & Acharya, I. P. (2021). Study on Parametric Analysis of Piled Raft Foundation System Using Finite Element Approach. Journal of Advanced College of Engineering and Management, 6, 143.
[13]. Alnuiam, A., El Naggar, H., and El Naggar, M. H. (2013, September). Performance of piled-raft system under axial load. In 18th International Conference on Soil Mechanics and Geotechnical Engineering (pp. 2663-2666).
[14]. Katzenbach, R., & Choudhury, D. (2013). Combined pile-raft foundation guideline. ISSMGE international society of soil mechanics and geotechnical engineering, institute and laboratory of geotechnics, Technical University of Darmstadt, Germany.
[15]. Poulos, H. G. (2001). Piled raft foundations: design and applications. Geotechnique, 51(2), 95-113.
[16]. Nguyen, D. D. C., Kim, D. S., and Jo, S. B. (2014). Parametric study for optimal design of large piled raft foundations on sand. Computers and Geotechnics, 55, 14-26.
[17]. Sinha, A., & Hanna, A. M. (2017). 3D numerical model for piled raft foundation. International Journal of Geomechanics, 17(2), 04016055.
[18]. Kumar, V. and Kumar, A. (2018). An experimental study to analyse the behaviour of piled-raft foundation model under the application of vertical load. Innovative Infrastructure Solutions, 3(1), 1-17.
[19]. Srilakshmi, G. and Darshan Moudgalya, N. S. (2013). Analysis of piled raft foundation using finite element method. International Journal of Engineering Research and Science & Technology, 2(3), 89-96.
[20]. Mohammed, Y., Yousif, M. A., & Al-Tameemi, S. M. (2013). Bearing capacity of pile group and piled raft foundations on sandy soil. Journal of Engineering and Sustainable Development, 17(2), 64-96.
[21]. Vu, A., Pham, D., Nguyen, T., & He, Y. (2014). 3D finite element analysis on behaviour of piled raft foundations. Applied Mechanics and Materials, 580, 3-8.
[22]. Fattah, M. Y., Yousif, M. A., and Al-Tameemi, S. M. (2015). Effect of pile group geometry on bearing capacity of piled raft foundations. Structural engineering and Mechanics, 54(5), 829-853. | ||
آمار تعداد مشاهده مقاله: 358 تعداد دریافت فایل اصل مقاله: 444 |