Performance Prediction of a Hard Rock TBM using Statistical and Artificial Intelligence Methods | ||
| Journal of Mining and Environment | ||
| مقاله 17، دوره 15، شماره 1، فروردین 2024، صفحه 323-343 اصل مقاله (3.19 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2023.13370.2460 | ||
| نویسندگان | ||
| Alireza Afradi1، 2؛ Arash Ebrahimabadi* 3؛ Mansour Hedayatzadeh4 | ||
| 1Department of Mining and Geology, Qaemshahr Branch, Islamic Azad University, Qaemshahr, Iran. | ||
| 2Rahyan Novin Danesh (RND) Private University, Sari, Mazandaran, Iran. | ||
| 3Department of Petroleum, Mining and Material Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran. | ||
| 4Research Fellow, School of Civil Engineering, University of Leeds, Leeds, England | ||
| چکیده | ||
| Tunnel Boring Machines (TBMs) are extensively used to excavate underground spaces in civil and tunneling projects. An accurate evaluation of their penetration rate is the key factor for the TBM performance prediction. In this study, artificial intelligence methods are used to predict the TBM penetration rate in excavation operations in the Kerman tunnel and the Gavoshan water conveyance tunnels. The aim of this paper is to show the application of the Multivariate Linear Regression (MLR), Artificial Neural Network (ANN), and Support Vector Machine (SVM) for the TBM penetration rate prediction. The penetration rate parameter is considered as a dependent variable, and the Rock Quality Designation (RQD), Brazilian Tensile Strength (BTS), Uniaxial Compressive Strength (UCS), Density (D), Joint Angle (JA), Joint Spacing (JS), and Poisson's Ratio are considered as independent variables. The obtained results by the several proposed methods indicated a high accuracy between the predicted and measured penetration rates, but the support vector machine yields more precise and realistic outcomes. | ||
| کلیدواژهها | ||
| Tunnel Boring Machine؛ Multivariate Linear Regression؛ Artificial Neural Network؛ Support Vector Machine | ||
| مراجع | ||
|
[1]. Rezaei, A., Shirzehhagh, M., & Golpasand, M. R. B. (2019). EPB tunneling in cohesionless soils: A study on Tabriz Metro settlements. Geomechanics and Engineering, 19(2), 153–165.
[2]. Kim, D., Pham, K., Park, S., Oh, J., & Choi, H. (2020). Determination of effective parameters on surface settlement during shield TBM. Geomechanics and Engineering, 21(2), 153–164.
[3]. Kim, D., & Jeong, S. (2021). Estimation of the excavation damage zone in TBM tunnel using large deformation FE analysis. Geomechanics and Engineering, 24(4), 323–335.
[4]. Pan, Q., Chen, Z., Wu, Y., Dias, D., & Oreste, P. (2021). Probabilistic tunnel face stability analysis: A comparison between LEM and LAM. Geomechanics and Engineering, 24(4), 399–406.
[5]. Rostami, J., Ozdemir, L. and Nilson, B. (1996). Comparison between CSM and NTH Hard Rock TBM Performance Prediction Models. Proceedings of the Annual Technical Meeting of the Institute of Shaft Drilling Technology (ISDT), Las Vegas, 1-3 May 1996, 1-10.
[6]. Bruland, A. (1998). Hard rock tunnel boring. (PhD), Norwegian University of Science and Technology, Trondheim.
[7]. Bruland, A., Dahlø, T.S., and Nilsen, B. (1995). Tunneling performance Estimation based on Drillability Testing. Paper presented at the ISRM Congress, Tokyo.
[8]. Palmström, A. (1995). RMi- a rock mass characterization system for rock engineering purposes. (PhD), University of Oslo.
[9]. Nilsen, B., and Ozdemir, L. (1993). Hard rock tunnel boring prediction and field performance. Paper presented at the RETC, Boston.
[10]. Rostami, J. (1997). Development of a force estimation model for rock fragmentation with disc cutters through theoretical modelling and physical measurement of crushed zone pressure (PhD), Colorado School of Mines.
[11]. Rostami, J., and Ozdemir, L. (1993). A new model for performance prediction of hard rock TBMs. Paper presented at the Rapid excavation and tunneling conference, Boston, MA.
[12]. Barton, N. (2000). TBM Tunneling in Jointed and Fault Rock, Rotterdam: Balkema.
[13]. Barton, N. (2006). Fault zones and TBM, Paper presented at the Geotechnical Risks in Rock Tunnels.
[14]. Bieniawski, Z.T., Celada, B., Galera, J.M., and Álvares, M. (2006). Rock Mass Excavability (RME) index. Paper presented at the ITA World Tunnelling Congress, Seoul.
[15]. Bieniawski, Z.T, Celada, B., and Galera, J.M. (2007). Predicting TBM Excavability. Tunnels & Tunnelling International.
[16]. Bieniawski, Z.T., Celada, B., Galera, J.M., and Tardaguila, I. (2008). New applications of the excavability index for selection of TBM and predicting their performance. Paper presented at the ITA-AITES World Tunnel Congress 2008, Agra, India.
[17]. Bieniawski, Z.T., Celada, B., Galera, J.M., and Tardaguila, I. (2009). Prediction of cutter wear using RME. Proceedings of ITA-AITES world tunnel congress 2009 & 35th ITA general assembly, May 23–28, Budapest, Hungary.
[18]. Büchi, E. (1984). Einfluss geologischer Parameter auf die Vortriebsleistung einer Tunnelbohrmaschine (mit besonderer Berücksichtigung der Gesteinsanisotropie). (PhD), University of Bern.
[19]. Gong, Q., & Zhao, J. (2009). Development of a rock mass characteristics model for TBM penetration rate prediction. International Journal of Rock Mechanics and Mining Sciences, 46(1), 8–18.
[20]. Hassanpour, J., Rostami, J., & Zhao, J. (2011). A new hard rock TBM performance prediction model for project planning. Tunnelling and Underground Space Technology, 26(5), 595–603.
[21]. Sapigni, M., Berti, M., Bethaz, E., Busillo, A., & Cardone, G. (2002). TBM performance estimation using rock mass classifications. International Journal of Rock Mechanics and Mining Sciences, 39(6), 771–788.
[22]. Tarkoy, P. J. (1973). Prediction of TBM penetration rates in selected rock types. Proceedings, Ninth Canadian Rock Mechanics Symposium, Montreal.
[23]. Graham, P.C. (1976). Rock exploration for machine manufacturers, In: Z.T. Bieniawski (Ed.), Exploration for Rock Engineering, Balkema, Johannesburg.
[24]. Farmer, I.W., and Glossop, N.H. (1980). Mechanics of disc cutter penetration. Tunnels and Tunneling, 12(6),22-25.
[25]. Cassinelli, F. et al. (1982). Power consumption and metal wear in tunnel boring machines, analysis of tunnel operation in hard rock. Proceedings, Tunneling 82, London, IMM, PP. 73-81.
[26]. Lislerud, A. et al. (1983). Hard rock tunnel boring. Project Rep 1-83, Univ. Trondheim, Norwegian Institute of Technology, Division Construction Engineering.
[27]. Bamford, W.E. (1984). Rock test indices are being successfully correlated with tunnel boring machine performance, Proceedings, Fifth Australian Tunneling Conference, Sydney.
[28]. Grima, M. A., Bruines, P., & Verhoef, P. N. (2000). Modeling tunnel boring machine performance by neuro-fuzzy methods. Tunnelling and Underground Space Technology, 15(3), 259–269.
[29]. Delisio, A., Zhao, J., & Einstein, H. H. (2013). Analysis and prediction of TBM performance in blocky rock conditions at the Lötschberg Base Tunnel. Tunnelling and Underground Space Technology, 33, 131–142.
[30]. Vergara, I. M., & Saroglou, C. (2017). Prediction of TBM performance in mixed-face ground conditions. Tunnelling and Underground Space Technology, 69, 116–124.
[31]. Armetti, G., Migliazza, M., Ferrari, F., Berti, A., & Padovese, P. (2018). Geological and mechanical rock mass conditions for TBM performance prediction. The case of “La Maddalena” exploratory tunnel, Chiomonte (Italy). Tunnelling and Underground Space Technology, 77, 115–126.
[32]. Kim, K., Jo, S., Ryu, H., & Cho, G. (2020). Prediction of TBM performance based on specific energy. Geomechanics and Engineering, 22(6), 489–496.
[33]. Innaurato, N., Mancini, R., Rondena, E., and Zaninetti, A. (1991). Forecasting and effective TBM performances in a rapid excavation of a tunnel in Italy, Seventh International Congress ISRM, Aachen 1009-1014.
[34]. Ribacchi, R., & Fazio, A. L. (2004). Influence of rock mass parameters on the performance of a TBM in a Gneissic formation (Varzo Tunnel). Rock Mechanics and Rock Engineering, 38(2), 105–127.
[35]. Yağız, S., Gökçeoğlu, C., Sezer, E. A., & İplikçi, S. (2009). Application of two non-linear prediction tools to the estimation of tunnel boring machine performance. Engineering Applications of Artificial Intelligence, 22(4–5), 808–814.
[36]. Hassanpour, J., Rostami, J., Khamehchiyan, M., & Bruland, A. (2009). Developing new equations for TBM performance prediction in carbonate-argillaceous rocks: a case history of Nowsood water conveyance tunnel. Geomechanics and Geoengineering, 4(4), 287–297.
[37]. Hamidi, J. K., Shahriar, K., Rezai, B., & Rostami, J. (2010). Performance prediction of hard rock TBM using Rock Mass Rating (RMR) system. Tunnelling and Underground Space Technology, 25(4), 333–345.
[38]. Afradi, A., Ebrahimabadi, A., & Hallajian, T. (2020). Prediction of tunnel boring machine penetration rate using ant colony optimization, bee colony optimization and the particle swarm optimization, case study: Sabzkooh water conveyance tunnel. Mining of Mineral Deposits, 14(2), 75–84.
[39]. Wang, S., Lin, Z., & Dai, J. (2014). Empirical likelihood diagnosis of modal linear regression models. Journal of Applied Mathematics and Physics, 02(10), 948–952.
[40]. Yilmaz, I., & Yüksek, A. G. (2007). An example of artificial neural network (ANN) application for indirect estimation of rock parameters. Rock Mechanics and Rock Engineering, 41(5), 781–795.
[41]. Hagan, M.T., Demuth, H.B., and Beale, M. (1996). Neural Network Design, PWS Publishing Company, Boston, MA.
[42]. Haykin, S. (1999). Neural Networks: A Comprehensive Foundation, Upper Saddle River, New Jersey 07458: Prentice Hall.
[43]. Afradi, A., Ebrahimabadi, A., & Hallajian, T. (2019). Prediction of the penetration rate and number of consumed disc cutters of Tunnel Boring Machines (TBMs) using Artificial Neural Network (ANN) and Support Vector Machine (SVM)—CASE Study: Beheshtabad Water conveyance tunnel in Iran. Asian Journal of Water, Environment and Pollution, 16(1), 49–57.
[44]. Afradi, A., & Ebrahimabadi, A. (2021). Prediction of TBM penetration rate using the imperialist competitive algorithm (ICA) and quantum fuzzy logic. Innovative Infrastructure Solutions, 6(2),1-17.
[45].Saki, D., and Pouryani, S.B.M. (2014). Financial and Time Management of Reassembling and Exiting Gavoshan OPEN T.B.M from the Value Engineering Point of view. Journal of Applied Environmental and Biological Sciences 4(5),263-270.
[46]. Gholizadeh, H., Peely, A. B., Karney, B. W., & Malekpour, A. (2020). Assessment of groundwater ingress to a partially pressurized water-conveyance tunnel using a conduit-flow process model: a case study in Iran. Hydrogeology Journal, 28(7), 2573–2585.
[47]. Karami, M., Zare, S., & Rostami, J. (2020). Tracking of disc cutter wear in TBM tunneling: a case study of Kerman water conveyance tunnel. Bulletin of Engineering Geology and the Environment, 80(1), 201–219.
[48]. Afradi, A., Ebrahimabadi, A., & Hallajian, T. (2021). Prediction of TBM penetration rate using fuzzy logic, particle swarm optimization and harmony search algorithm. Geotechnical and Geological Engineering, 40(3), 1513–1536.
[49]. Afradi, A., & Ebrahimabadi, A. (2020). Comparison of artificial neural networks (ANN), support vector machine (SVM) and gene expression programming (GEP) approaches for predicting TBM penetration rate. SN Applied Sciences, 2(12). https://doi.org/10.1007/s42452-020-03767-y.
[50]. Mikaeil, R., Frough, O., KhaloKakaie, R., and Ataei, M. (2009) Prediction of TBM Penetration Rate with Generalized Regression Neural Network in Hard Rock Condition, 8th International Congress on Civil Engineering, May 11-13, 2009, Shiraz University, Shiraz, Iran.
[51]. Bejari H., Kakaie R., Ataei M., and Khademi H. (2011). Simultaneous effects of joint spacing and joint orientation on the penetration rate of a single disc cutter.Mining Science and Technology (China), 21(4),507-512.
[52]. Frough, O., Torabi, S. R., and Tajik, M. (2012). Evaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2). Journal of Mining and Environment, 3(2), 89-98.
[53]. Dehghani, H., & Beiranvand, N. M. (2016). Estimation of penetration rate of tunnel boring machines using Monte-Carlo simulation method. Journal of Mining and Environment, 7(2), 175–184.
[54]. Moosazadeh, S., Aghababaie, H., Hoseinie, S. H., & Ghodrati, B. (2018). Simulation of tunnel boring machine utilization: A case study. Journal of Mining and Environment, 9(1), 53–60.
[55]. Yağız, S. (2008). Utilizing rock mass properties for predicting TBM performance in hard rock condition. Tunnelling and Underground Space Technology, 23(3), 326–339.
[56]. ZareNaghadehi, M. Z., Samaei, M., Ranjbarnia, M., & Nourani, V. (2018). State-of-the-art predictive modeling of TBM performance in changing geological conditions through gene expression programming. Measurement, 126, 46–57.
[57]. Adoko, A. C., Gökçeoğlu, C., & Yağız, S. (2017). Bayesian prediction of TBM penetration rate in rock mass. Engineering Geology, 226, 245–256.
| ||
|
آمار تعداد مشاهده مقاله: 739 تعداد دریافت فایل اصل مقاله: 560 |
||