Cyanide Removal from Tailing Slurry of Gold Processing Plant using Surfactant-modified Zeolite | ||
| Journal of Mining and Environment | ||
| مقاله 15، دوره 15، شماره 1، فروردین 2024، صفحه 285-300 اصل مقاله (2.6 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2023.13217.2418 | ||
| نویسندگان | ||
| Mehdi Soleymani Gharegol1؛ Kazem Badv1؛ Behzad Nemati akhgar* 2 | ||
| 1Civil Engineering Department, Engineering Faculty, Urmia University, Urmia, Iran, Iran | ||
| 2Mining Engineering Department, Engineering Faculty, Urmia University, Urmia, Iran | ||
| چکیده | ||
| This paper carried out the study on removing cyanide from aqueous solutions by modified zeolite with hexadecyltrimethylammonium bromide. After determining the properties of the prepared adsorbent by the XRD, SEM, FTIR, and BET techniques, the effect of parameters such as the initial concentration of cyanide, pH, contact time, temperature, and the ionic strength of cyanide was examined by batch tests, and the effects of bed depth and flow rate on the performance of cyanide adsorption was investigated by column process. The XRD analysis showed the presence of clinoptilolite mineral in the structure of the raw zeolite, and the surface coating of raw zeolite by surfactant was detected by the SEM method. The FT-IR results confirmed the adsorption of cationic surfactant on the surface of the modified zeolite. The Langmuir, Freundlich and Tamkin adsorption models showed an excellent ability to describe the cyanide adsorption isotherm using the studied adsorbent. The adsorption capacity of cyanide by modified zeolite was 3.97 mg/g, significantly increased compared to the maximum adsorption capacity of raw zeolite cyanide (0.54 mg/g). The pseudo-second-order model has an excellent ability to describe the adsorption kinetics of cyanide contaminants using natural and modified zeolites. Maximum cyanide uptake capacity was achieved at pH value 8. Cyanide removal decreased with increasing pH and ionic strength of the stock solution and increased with an increase in solution temperature. Column study results confirmed that the adsorption capacity increased with the increasing bed depth, and decreased with increasing flow rate. Yoon-Nelson curves are closer to the experimental curves with high R2 values. | ||
| کلیدواژهها | ||
| Cyanide؛ Surfactant؛ Adsorption isotherms؛ Kinetics؛ Gold tailings dam | ||
| مراجع | ||
|
[1]. Ghasemi, N. and Rohani, S., 2019. Optimization of cyanide removal from wastewaters using a new nano-adsorbent containing ZnO nanoparticles and MOF/Cu and evaluating its efficacy and prediction of experimental results with artificial neural networks. Journal of Molecular Liquids, 285, 252-269.
[2]. Han, B., Shen, Z., Wickramasinghe, S.R. 2005. Cyanide removal from industrial wastewaters using gas membranes. Journal of membrane science, 257(1), 171-181.
[3]. Logsdon, M.J., Hagelstein, K., Mudder, T. 1999. The management of cyanide in gold extraction: International Council on Metals and the Environment, Ottawa.
[4]. Lee, T. Y., Kwon, Y. S., and Kim, D. S. (2004). Oxidative treatment of cyanide in wastewater using hydrogen peroxide and homogeneous catalyst. Journal of Environmental Science and Health, Part A, 39(3), 787-801.
[5]. Amaouche, H., Chergui, S., Halet, F., Yeddou, A. R., Chergui, A., Nadjemi, B., and Ould-Dris, A. (2019). Removal of cyanide in aqueous solution by oxidation with hydrogen peroxide catalyzed by copper oxide. Water Science and Technology, 80(1), 126-133.
[6]. Moussavi, G. and Khosravi, R., 2010. Removal of cyanide from wastewater by adsorption onto pistachio hull wastes: Parametric experiments, kinetics and equilibrium analysis. Journal of Hazardous Materials, 183(1-3), 724-730. https://doi.org/10.1016/j.jhazmat.2010.07.086.
[7]. Gebresemati, M., Gabbiye, N., and Sahu, O. 2017. Sorption of cyanide from aqueous medium by coffee husk: Response surface methodology. Journal of applied research and Technology, 15(1), 27-35.
[8]. Osathaphan, K., Boonpitak, T., Laopirojana, T., and Sharma, V. K. 2008. Removal of cyanide and zinc–cyanide complex by an ion-exchange process. Water, air, and soil pollution, 194(1), 179-183.
[9]. Simsek, H., Kobya, M., Khan, E., and Bezbaruah, A. N. 2015. Removal of aqueous cyanide with strongly basic ion-exchange resin. Environmental technology, 36(13), 1612-1622.
[10]. Zhang, J., Liu, L., Liang, Y., Zhou, J., Xu, Y., Ruan, X., Lu, Y., Xu, Z., Qian, G. 2015. Enhanced precipitation of cyanide from electroplating wastewater via self-assembly of bimetal cyanide complex. Separation and Purification Technology, 150, 179-185.
[11]. Bodalo-Santoyo, A., Gómez-Carrasco, J. L., Gomez-Gomez, E., Maximo-Martin, F., and Hidalgo-Montesinos, A. M. 2003. Application of reverse osmosis to reduce pollutants present in industrial wastewater. Desalination, 155(2), 101-108.
[12]. Vasquez Salazar, E. E. and Hurtado Bolanos, F. P. 2021. Cyanide compounds removal efficiency in a reverse osmosis system using a water supply from a co-precipitation chemical process. Desalination and Water Treatment, 229, 235-242.
[13]. Jaszczak, E., Polkowska, Z., Narkowicz, S., Namieśnik, J., 2017. Cyanides in the environment analysis problems and challenges. Environmental Science and Polluion Research, 24, 15929–15948.
[14]. Naeem, S., Zafar, U. 2009. Adsorption studies of cyanide (CN)- on alumina, PAKISTAN JOURNAL OF ANALYTICAL & ENVIRONMENTAL CHEMISTRY,10, 83–87.
[15]. Adhoum, N. and Monser, L. 2002. Removal of cyanide from aqueous solution using impregnated activated carbon. Chemical Engineering and Processing: Process Intensification, 41(1), 17-21.
[16]. Halet, F., Yeddou, A. R., Chergui, A., Chergui, S., Nadjemi, B., and Ould-Dris, A. 2015. Removal of cyanide from aqueous solutions by adsorption on activated carbon prepared from lignocellulosic by-products. Journal of Dispersion Science and Technology, 36(12), 1736-1741.
[17]. Wang, X., Wang, X., Tan, H., Hu, Z., Deng, S., and Li, Y. 2015. Removal of hydrogen cyanide by using activated carbon: the effect of adsorption condition and chemical modification. Journal of Biobased Materials and Bioenergy, 9(6), 545-552.
[18]. Depci, T. 2012. Comparison of activated carbon and iron impregnated activated carbon derived from Gölbaşı lignite to remove cyanide from water. Chemical Engineering Journal, 181, 467-478.
[19]. Alonso-González, O., Nava-Alonso, F., and Uribe-Salas, A. 2009. Copper removal from cyanide solutions by acidification. Minerals Engineering, 22(4), 324-329.
[20]. Bae, M., Lee, H., Kim, S., and Yoo, K. 2019. Destruction of cyanide and removal of copper from waste printed circuit boards leach solution using electro-generated hypochlorite followed by magnetite adsorption. Metals, 9(9), 963.
[21]. Tyagi, M., Rana, A., Kumari, S., and Jagadevan, S. 2018. Adsorptive removal of cyanide from coke oven wastewater onto zero-valent iron: Optimization through response surface methodology, isotherm and kinetic studies. Journal of Cleaner Production, 178, 398-407.
[22]. Coronel, S., Endara, D., Lozada, A. B., Manangón-Perugachi, L. E., and de la Torre, E. 2021. Photocatalytic Study of Cyanide Oxidation Using Titanium Dioxide (TiO2)-Activated Carbon Composites in a Continuous Flow Photo-Reactor. Catalysts, 11(8), 924.
[23]. Samarghandi, M. R., Al-Musawi, T. J., Mohseni-Bandpi, A., and Zarrabi, M. 2015. Adsorption of cephalexin from aqueous solution using natural zeolite and zeolite coated with manganese oxide nanoparticles. Journal of molecular liquids, 211, 431-441.
[24]. Mohseni-Bandpi, A., Al-Musawi, T. J., Ghahramani, E., Zarrabi, M., Mohebi, S., and Vahed, S. A. 2016. Improvement of zeolite adsorption capacity for cephalexin by coating with magnetic Fe3O4 nanoparticles. Journal of Molecular Liquids, 218, 615-624.
[25]. Noroozi, R., Al-Musawi, T. J., Kazemian, H., Kalhori, E. M., and Zarrabi, M. 2018. Removal of cyanide using surface-modified Linde Type-A zeolite nanoparticles as an efficient and eco-friendly material. Journal of Water Process Engineering, 21, 44-51.
[26]. Torabian, A., Kazemian, H., Seifi, L., Bidhendi, G.N., Azimi, A.A., Ghadiri, S.K., 2010. Removal of petroleum aromatic hydrocarbons by surfactant‐ modified natural zeolite: the effect of surfactant. Clean Soil, Air, Water, 38(1), 77-83. https://doi.org/10.1002/clen.200900157.
[27]. Ashrafizadeh, S.N., Khorasani, Z., Gorjiara, M., 2008. Ammonia removal from aqueous solutions by Iranian natural zeolite. Separation Science and Technology, 43(4), 960-978. https://doi.org/10.1080/01496390701870614
[28]. Manyuchi, M. M., Sukdeo, N., and Stinner, W. 2022. Potential to remove heavy metals and cyanide from gold mining wastewater using biochar. Physics and Chemistry of the Earth, Parts A/B/C, 126, 103110.
[29]. Zhou, S., Li, W., Liu, W., and Zhai, J. 2023. Removal of metal ions from cyanide gold extraction wastewater by alkaline ion-exchange fibers. Hydrometallurgy, 215, 105992. https://doi.org/10.1016/j.hydromet.2022.105992.
[30]. Bukhari, S. S., Behin, J., Kazemian, H., and Rohani, S. 2015. Synthesis of zeolite NA‐A using single mode microwave irradiation at atmospheric pressure: The effect of microwave power. The Canadian Journal of Chemical Engineering, 93(6), 1081-1090.
[31]. Larsen OFA and Woutersen S. 2004. Vibrational relaxation of the H2O bending mode in liquid water. J Chem Phys. 121, 12143–12145.
[32]. Taffarel, S. R. and Rubio, J. 2010. Adsorption of sodium dodecyl benzene sulfonate from aqueous solution using a modified natural zeolite with CTAB. Minerals Engineering, 23(10), 771-779.
[33]. Apha, A. 2005. Wpcf. Standard methods for the examination of water and wastewater. 20th Ed.,Washington, DC.
[34]. Eletta, O.A.A., Ajayi, O.A., Ogunleye, O.O., and Akpan, I.C., 2016. Adsorption of cyanide from aqueous solution using calcinated eggshells: Equilibrium and optimization studies. Journal of Environmental Chemical Engineering, 4(1), 1367-1375.
[35]. Deveci, H. A. C. I., Yazıcı, E. Y., Alp, I., and Uslu, T. U. N. C. A. Y. 2006. Removal of cyanide from aqueous solutions by plain and metal-impregnated granular activated carbons. International Journal of mineral processing, 79(3), 198-208.
[36]. Stavropoulos, G.G., Skodras, G.S., and Papadimitriou, K.G., 2015. Effect of solution chemistry on cyanide adsorption in activated carbon. Applied thermal engineering, 74,. 182-185. https://doi.org/10.1016/j.applthermaleng.2013.09.060.
[37]. Liu, G. J., Zhang, X. R., McWilliams, L., Talley, J. W., and Neal, C. R. 2008. Influence of ionic strength, electrolyte type, and NOM on As (V) adsorption onto TiO2. Journal of Environmental Science and Health Part A, 43(4), 430-436.
[38]. Li, C., Yu, Y., Zhang, Q., Zhong, H., and Wang, S. 2020. Removal of Ammonium from Aqueous Solutions using Zeolite Synthesized from Electrolytic Manganese Residue. International Journal of Chemical Engineering, 2020.
[39]. Freundlich, H. M. F. 1906. Over the adsorption in solution. J. Phys. chem, 57(385471), 1100-1107.
[40]. Langmuir, I. 1916. The constitution and fundamental properties of solids and liquids. Part I. Solids. Journal of the American chemical society, 38(11), 2221-2295.
[41]. Tempkin, M. I. and Pyzhev, V. J. A. P. C. 1940. Kinetics of ammonia synthesis on promoted iron catalyst. Acta Physicochimica URSS, 12(1), 327.
[42]. Weber, T. W. and Chakravorti, R. K. 1974. Pore and solid diffusion model for fixed bed adsorbents. AIChE Journal, 20, 228.
[43]. Lagergren, S. K. 1898. About the theory of so-called adsorption of soluble substances. Sven. Vetenskapsakad. Handingarl, 24, 1-39.
[44]. Ho, Y. S. and McKay, G. 1999. Pseudo-second order model for sorption processes. Process biochemistry, 34(5), 451-465.
[45]. Kumar, P.S. and Kirthika, K. 2009. Equilibrium and kinetic study of adsorption of nickel from aqueous solution onto bael tree leaf powder. Journal of Engineering Science and Technology, 4(4), 351-363.
[46]. Yoon, Y. H. and Nelson, J. H. 1984. Application of gas adsorp-tion kinetics I. A theoretical model for respirator cartridge servicelife. American Industrial Hygiene Association Journal, 45(8), 509–516.
| ||
|
آمار تعداد مشاهده مقاله: 310 تعداد دریافت فایل اصل مقاله: 332 |
||