[1] Oppong, F., van der Spuy, S., von Backström, T., & Diaby, A. L. (2015). An overview of micro gas turbine engine performance investigation. R&D J, 31, 35-41.

[2] Dutczak, J. (2016). Micro turbine engines for drones propulsion. In IOP Conf. Series: Materials Science and Engineering (Vol. 148, No. 1, p. 012063). IOP Publishing.

[3] Costa, F. P., Henrique, L., Whitacker, L., Bringhenti, C., & Tomita, J. T. (2019). An overview of small gas turbine engines. In Proc. of the 24th ISABE conf., Canberra, Australia (pp. 22-27).

[4] Elzahaby, A. M., Khalil, M. K., & Khalil, H. E. (2016). Theoretical and experimental analysis of a micro turbojet engine’s performance. Int. J. of Scientific & Engineering Research, 7(1), 404-410.

[5] Wu, X., Hu, X., Xiang, X., Lin, S., You, J., & Tian, F. (2023). An analysis approach for micro gas turbine engine's performance by experiment and numerical simulation. Case Stud. Therm. Eng., 49, 103305.

[6] Imani, A., Anjomrouz, A., Rasti-Jahromi, A. (2023). Thermodynamic modelling of a two spool unmixed flow micro-turbofan engine. 21st International Conf. On Iranian Aerospace.

[7] Ashry, M. M. (2020). Controller Design for Micro Turbojet Engine. In 2020 12th International Conf. on Electrical Engineering (ICEENG) (pp. 436-440). IEEE.

[8] Huang, L., Gu, F., Zhang, Y., & He, Y. (2016). Modeling and Timing Simulation of Micro Turbine engine in Starting Process. In IOP Conf. Series: Materials Science and Engineering (Vol. 157, No. 1, p. 012022). IOP Publishing.

[9] Montazeri-Gh, M., Fashandi, S. A. M., & Jafari, S. (2018). Theoretical and experimental study of a micro jet engine start-up behaviour. Tehnički vjesnik, 25(3), 839-845.

[10] Xia, C., Fu, X., Wan, Z., Huang, G., & Chen, J. (2013). Research on windmill starting characteristics of MTE-D micro turbine engine. Chinese J. of Aeronautics, 26(4), 858-867.

[11] Barsi, D., Bottino, A., Perrone, A., Ratto, L., & Zunino, P. (2019). Design of a centrifugal compressor for micro gas turbine: investigation of scaling and tip clearance effects. Open J. of Fluid Dynamics, 9(01), 49.

[12] Burger, C. J., Van der Spuy, S. J., & von Backström, T. W. (2017). Design of a Compact Crossover Diffuser for Micro Gas Turbines Using a Mean-Line Code. Int. J. of Turbo & Jet-Engines, 36(4), 347-357.

[13] Jie, C., & Guoping, H. (2010). Redesign of an 11 cm-diameter Micro Diffuser. Chinese J. of aeronautics, 23(3), 298-305.

[14] Nili-Ahmadabadi, M., & Maleki, H. M. (2015). One-Dimensional Design of Centrifugal Compressor of a Turo-shaft Engine with Optimization of 90-Degree Bend Duct between Radial and Axial Diffuser. J. of Solid and Fluid Mech., 5(3), 65-77. doi: 10.22044/jsfm.2015.557

[15] Sebelev, A. A., Tikhonov, A. S., Aleksenskiy, V. A., Shengals, A. A., & Klyavin, O. I. (2021). Aerodynamic analysis of the small-scaled centrifugal compressor for micro-turbojet engine applications. J. of Physics: Conf. Series (Vol. 1891, No. 1, p. 012017).

[16] Xiang, J., Schlüter, J. U., & Duan, F. (2017). Study of KJ-66 micro gas turbine compressor: Steady and unsteady Reynolds-averaged Navier–Stokes approach. Proc. Inst. Mech. Eng., Part G: J. Aerosp. Eng., 231(5), 904-917.

[17] Czarnecki, M., & Olsen, J. (2018). Combined Methods in Preliminary Micro Scale Gas Turbine Diffuser Design–a Practical Approach. J. of Appl. Fluid Mech., 11(3), 567-575.

[18] Diener, O. H. F. (2016). Development of a mixed-flow compressor impeller for micro gas turbine application. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[19] Kock, M. P. (2017). Design of a cross-over diffuser for a mixed flow compressor impeller. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[20] Van der Merwe, B. B. (2012). Design of a centrifugal compressor impeller for micro gas turbine application. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[21] Krige, D. S. (2013). Performance evaluation of a micro gas turbine centrifugal compressor diffuser. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[22] Habibi, F. I., Hartono, F., & Prayogo, H. (2019). Optimization of an Annular Combustion Chamber for Micro Turbo Jet System. IOP Conf. Series: Materials Science and Engineering (Vol. 645, No. 1, p. 012009).

[23] Mohammed, R. S. E. (2019). Design and analysis of annular combustion chamber for a micro turbojet engine. International J. of Aerosp. and Mech. Eng., 13(4), 282-287.

[24] Toro, C. A. G., Wong, K. C., & Armfield, S. (2007). Computational study of a micro-turbine engine combustor using large eddy simulation and Reynolds averaged turbulence models. ANZIAM J., 49, C407-C422.

[25] Enagi, I. I., Al-Attab, K. A., & Zainal, Z. A. (2017). Combustion chamber design and performance for micro gas turbine application. Fuel Process. Technol., 166, 258-268.

[26] Moodley, R. (2016). Design and evaluation of a single stage axial flow turbine rotor for a micro turbojet engine. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Johannesburg. Johannesburg.

[27] Zhang, H. (2023). Three-Dimensional Computational Fluid Dynamics Simulation of the Turbine Blades of a Micro Turbojet Engine. J. of Physics: Conf. Series (Vol. 2458, No. 1, p. 012036).

[28] Basson, J. G. T. (2014). Design methodology of an axial-flow turbine for a micro jet engine. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[29] Briones, A., Sykes, J., Rankin, B. A., & Caswell, A. W. (2020). Steady-state cfd simulations of a small-scale turbojet engine from idle to cruise conditions. AIAA scitech 2020 forum (p. 2084).

[30] Shahriari, B., Yousefi, S., Tajdari, M., & Karamooz, M. R. (2015). Optimum design of the turbine blisk of a mini-turbojet engine. Aerosp. Knowl. and Technol. Journal, 4(1), 83-98. (In Persian)

[31] Kumar, R., Kumar, V. S., Butt, M. M., Sheikh, N. A., Khan, S. A., & Afzal, A. (2020). Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions. Appl. Therm. Eng., 179, 115700.

 [32] Alihosseini, A. R., Boroomand, M., Tousi, A. M., & Horoufi, A. (2012). Design and Developement of a Microjet Engine Indoor Test Cell. ASME Int. Mech. Eng. Congress and Exposition (Vol. 45172, pp. 409-417).

[33] Capata, R. (2015). Experimental tests of the operating conditions of a micro gas turbine device. J. Energy Power Eng, 9(4), 326-335.

[34] Derbel, K., & Beneda, K. (2020). Development of airborne test environment for micro turbojet engine-part II: remote measurement system. New Trends in Aviation Development (NTAD) (pp. 43-48). IEEE.

[35] Zhu, H., Du, F., Zhao, S., Xu, Z., & Lv, Z. (2016). Design of a new type thrust measuring system for micro-turbojet engine. 2nd Int. Conf. on Artificial Intelligence and Industrial Engineering (AIIE 2016) (pp. 474-477). Atlantis Press.

[36] Hybl Turbine Company Website, https://www.hyblturbines.cz/

[37] Holobeny, D., Polanka, M. D., & Bohan, B. T. (2020). Analysis of a Compact Combustor for Use in a JetCat P90 RXi. AIAA Scitech 2020 Forum (p. 0625).

[38] Öttl, C., & Willinger, R. (2020). Thermodynamic and Mechanical Design Concept for Micro-Turbojet to Micro-Turboshaft Engine Conversion. ASME Turbo Expo: Power for Land, Sea, and Air (Vol. 84195, p. V008T20A005).

[39] Kröger, G., Siller, U., Moser, T., & Hediger, S. (2014). Towards a highly efficient small scale turboshaft engine: Part I—Engine concept and compressor design. ASME Turbo Expo: Power for Land, Sea, and Air (Vol. 45615, p. V02BT45A015).

[40] El-Sayed, A. F. (2016). Fundamentals of aircraft and rocket propulsion (p. 1010). London: Springer.

[41] Mattingly, J. D., Boyer, K. M., & von Ohain, H. (2006). Elements of propulsion: gas turbines and rockets (Vol. 53). Reston, VA: American Institute of Aeronautics and Astronautics.

[42] Benini, E., & Giacometti, S. (2007). Design, manufacturing and operation of a small turbojet-engine for research purposes. Appl. Energy, 84(11), 1102-1116.

[43] Hill, P. G., & Peterson, C. R. (1992). Mechanics and thermodynamics of propulsion. Reading.

[44] Hong, S., Mugabi, J., & Jeong, J. H. (2022). Numerical Study on Vortical Flow Structure and Performance Enhancement of Centrifugal Compressor Impeller. Appl. Sciences, 12(15), 7755.

[45] Wilkosz, B. E., Jeschke, P., & Olivier, H. (2015). Aerodynamic Losses in an Aero Engine Centrifugal Compressor With a Close-Coupled Pipe-Diffuser and a Radial-Axial Deswirler (No. RWTH-2015-01729). Lehrstuhl und Institut für Strahlantriebe und Turboarbeitsmaschinen.

[46] Burger, C. (2016). Design procedure of a compact aerodynamic crossover diffuser for micro gas turbine application. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[47] Olivier, A. J. (2015). An experimental and numerical investigation of vaporizer tubes associated with micro gas turbines. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[48] Lefebvre, A. H., & Ballal, D. R. (2010). Gas turbine combustion: alternative fuels and emissions. CRC press.

[49] Petrie, K. (1964). Development of a Small Single- and Two-Shaft Gas Turbine for Military Applications. Proc. of the Inst. of Mech. Eng. 179(1), 343-364.

[50] Fuchs, F., Meidinger, V., Neuburger, N., Reiter, T., Zündel, M., & Hupfer, A. (2016). Challenges in designing very small jet engines-fuel distribution and atomization. 16th Int. Symposium on Transport Phenomena and Dynamics of Rotating Machinery.

[51] Celic, E., Uslu, S., & Topal, A. (2011). Numerical simulation of the reacting flow through the combustor of a small scale turboprop engine. Ankara Int. Aerospace Conf.

[52] AMT Company Website, https://www.amtjets.com/

[53] Fulara, S., Chmielewski, M., & Gieras, M. (2020). Variable geometry in miniature gas turbine for improved performance and reduced environmental impact. Energies, 13(19), 5230.

[54] Leylek, Z., Anderson, W. S., Rowlinson, G., & Smith, N. (2013). An investigation into performance modeling of a small gas turbine engine. ASME Turbo Expo: Power for Land, Sea, and Air (Vol. 55195, p. V05AT23A007).

[55] Hawk Turbine Company Website, http://www.hawkturbine.com/

[56] Marsh, D. A. (2019). Conversion of a kerosene-fuelled gas turbine to run on propane. Master of Engineering Thesis, Dept. of Mechanical Engineering, University of Stellenbosch, Stellenbosch.

[57] Nylén, M. (2013). Performance prediction of a microjet engine run on alternative fuels.

[58] Söğüt, M. Z. (2018). Exergetic irreversibility and sustainability performances for alternative fuels in the micro-turbojet engine. Int. J. of Green Energy, 15(3), 169-180.

[59] Tan, I. H., & Liou, W. (2013). Performance and emission of a biofueled micro turbojet engine. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (p. 110).

[60] JetJoe Company Website, http://www.jetjoe.com/

[61] Lambert Company Website, http://www.lambert-modellturbinen.de/

[62] JetCat Company Website, https://www.jetcat.de/

[63] KingTech Company Website, http://www.kingtechturbines.com/

[64] Turbine Solution Company Website, https://www.turbinesolutions.co.uk/

[65] XICOY Company Website, http://www.xicoyturbines.com/

[66] PSTjet Company Website, https://www.pstjets.com/

[67] SW-jet Company Website, https://www.sw-jet.com/

[68] JetCentral Company Website, https://jetcentral.com.mx/

[69] Jets-munt Company Website, https://jets-munt.com/

[70] Jetpol Company Website, https://jetpol.tech/

[71] Evojet Company Website, http://xtcm.evojets.de/

[72] BF-turbine Company Website, http://www.bf-turbines.de/

[73] Behotec Company Website, http://www.behotec.de/

[74] Frank Turbine Company Website, https://frankturbine.com/

[75] PSR-jets Company Website, http://www.psr-jet-system.com/

[76] PBS Company Website, https://www.pbs.cz/en/

[77] TEI Company Website, https://www.tei.com.tr/en

[78] Propsan Company Website, https://propsan.com/

[79] Jetbeetle Company Website, http://jetbeetle.com/

[80] Polaris Company Website, https://www.polaristec.com.br/