[1]. Hoek, E., Carranza-Torres, C., &Corkum, B. (2002). Hoek-Brown failure criterion-2002 edition. Proceedings of NARMS-Tac, 1(1), 267-273.

[2]. Labuz, J. F. and Zang, A. (2012). Mohr–Coulomb failure criterion. Rock mechanics and rock engineering, 45, 975-979.

[3]. Bieniawski Z.T. (1989) Engineering rock mass classifications. John Wiley & Sons, New York, 251 p.

[4]. Romana, M.R. (1993). A Geomechanical Classification for Slopes: Slope Mass Rating. Rock Testing and Site Characterization, 575–600. doi:10.1016/b978-0-08-042066-0.50029-x. 

[5]. Barton, N. (2002). Some new Q-value correlations to assist in site characterisation and tunnel design. International journal of rock mechanics and mining sciences, 39(2), 185-216.

[6]. Palmström, A. (2009). Combining the RMR, Q, and RMi classification systems. Tunnelling and Underground Space Technology, 24(4), 491‒492.

[7]. Feng, X. and Jimenez, R. (2014). Bayesian prediction of elastic modulus of intact rocks using their uniaxial compressive strength. Engineering geology, 173, 32-40.

[8]. İnce, İ., Bozdağ, A., Fener, M., and Kahraman, S. (2019). Estimation of uniaxial compressive strength of pyroclastic rocks (Cappadocia, Turkey) by gene expression programming. Arabian Journal of Geosciences 12, 756.

[9]. Zorlu, K., Gokceoglu, C., Ocakoglu, F., Nefeslioglu, H. A., and Acikalin, S. J. E. G. (2008). Prediction of uniaxial compressive strength of sandstones using petrography-based models. Engineering Geology, 96(3-4), 141-158.

[10]. Ceryan, N. (2014). Application of support vector machines and relevance vector machines in predicting uniaxial compressive strength of volcanic rocks. Journal of African Earth Sciences, 100, 634-644.

[11]. Pappalardo, G. (2015). Correlation between P-wave velocity and physical–mechanical properties of intensely jointed dolostones, Peloritani mounts, NE Sicily. Rock mechanics and rock engineering, 48, 1711-1721.

[12]. Ozer, M., Isik, N. S., & Orhan, M. (2008). Statistical and neural network assessment of the compression index of clay-bearing soils. Bulletin of Engineering Geology and the Environment, 67, 537-545.

[13]. Shahnazari, H. and Tutunchian, M. A. (2012). Prediction of ultimate bearing capacity of shallow foundations on cohesionless soils: An evolutionary approach. KSCE Journal of Civil Engineering, 16, 950-957.

[14]. Baykasoğlu, A., Güllü, H., Çanakçı, H., & Özbakır, L. (2008). Prediction of compressive and tensile strength of limestone via genetic programming. Expert Systems with Applications, 35(1-2), 111-123.

[15]. Yagiz, S., Sezer, E. A., & Gokceoglu, C. (2012). Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks. International Journal for Numerical and Analytical Methods in Geomechanics, 36(14), 1636-1650.

[16]. Jahanbakhshi, R., Keshavarzi, R., & Azinfar, M. J. (2011). Intelligent prediction of uniaxial compressive strength for sandstone. In ARMA US Rock Mechanics/Geomechanics Symposium (pp. ARMA-11). ARMA.

[17]. Monjezi, M., Amini Khoshalan, H., & Razifard, M. (2012). A neuro-genetic network for predicting uniaxial compressive strength of rocks. Geotechnical and Geological Engineering, 30, 1053-1062.

[18]. Ceryan, N., Okkan, U., & Kesimal, A. (2013). Prediction of unconfined compressive strength of carbonate rocks using artificial neural networks. Environmental earth sciences, 68, 807-819.

[19]. Yurdakul, M. and Akdas, H. (2013). Modeling uniaxial compressive strength of building stones using non-destructive test results as neural networks input parameters. Construction and Building Materials, 47, 1010‒1019.

[20]. Beiki, M., Majdi, A., & Givshad, A. D. (2013). Application of genetic programming to predict the uniaxial compressive strength and elastic modulus of carbonate rocks. International Journal of Rock Mechanics and Mining Sciences, 63, 159-169.

[21]. Yesiloglu-Gultekin, N. U. R. G. Ü. L., Gokceoglu, C., & Sezer, E. A. (2013). Prediction of uniaxial compressive strength of granitic rocks by various nonlinear tools and comparison of their performances. International Journal of Rock Mechanics and Mining Sciences, 62, 113-122.

[22]. Mohamad, E. T., Jahed Armaghani, D., Momeni, E., & Alavi Nezhad Khalil Abad, S. V. (2015). Prediction of the unconfined compressive strength of soft rocks: a PSO-based ANN approach. Bulletin of Engineering Geology and the Environment, 74, 745-757.

[23]. Mishra, D. A., Srigyan, M., Basu, A., & Rokade, P. J. (2015). Soft computing methods for estimating the uniaxial compressive strength of intact rock from index tests. International Journal of Rock Mechanics and Mining Sciences, 80, 418-424.

[24]. Momeni, E., Armaghani, D. J., Hajihassani, M., & Amin, M. F. M. (2015). Prediction of uniaxial compressive strength of rock samples using hybrid particle swarm optimization-based artificial neural networks. Measurement, 60, 50-63.

[25]. Torabi-Kaveh, M., Naseri, F., Saneie, S., & Sarshari, B. (2015). Application of artificial neural networks and multivariate statistics to predict UCS and E using physical properties of Asmari limestones. Arabian journal of Geosciences, 8, 2889-2897.

[26]. Fattahi, H. (2017). Applying soft computing methods to predict the uniaxial compressive strength of rocks from Schmidt hammer rebound values. Computational Geosciences, 21(4), 665-681.

[27]. Umrao, R. K., Sharma, L. K., Singh, R., & Singh, T. N. (2018). Determination of strength and modulus of elasticity of heterogeneous sedimentary rocks: An ANFIS predictive technique. Measurement, 126, 194-201.

[28]. Matin, S. S., Farahzadi, L., Makaremi, S., Chelgani, S. C., & Sattari, G. H. (2018). Variable selection and prediction of uniaxial compressive strength and modulus of elasticity by random forest. Applied Soft Computing, 70, 980-987.

[29]. Çelik, S. B. (2019). Prediction of uniaxial compressive strength of carbonate rocks from nondestructive tests using multivariate regression and LS-SVM methods. Arabian Journal of Geosciences, 12(6), 193.

[30]. Ceryan, N. and Samui, P. (2020). Application of soft computing methods in predicting uniaxial compressive strength of the volcanic rocks with different weathering degree. Arabian Journal of Geosciences, 13, 1-18.

[31]. Alzabeebee, S., Mohammed, D. A., & Alshkane, Y. M. (2022). Experimental study and soft computing modeling of the unconfined compressive strength of limestone rocks considering dry and saturation conditions. Rock Mechanics and Rock Engineering, 55(9), 5535-5554.

[32]. TS EN 1936 (2007) Natural stone test methods – Determination of real density and apparent density, and of total and open porosity, Turkish Standards Institution, Ankara – Turkey.

[33]. ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods. 2007 International Society for Rock Mechanics (ISRM), Ankara, Turkey.

[34]. Timofeev, R. (2004) Classification and regression trees (CART) theory and applications, Master Thesis (unpublished), Humboldt University, Berlin.

[35]. Loh, W.Y. (2011) Classification and regression trees Wiley interdisciplinary reviews: data mining and knowledge discovery, 1(1), 14-23.

[36]. Hasanipanah M., Faradonbeh R.S, Amnieh H.B., Armaghani D.J., & Monjezi, M. (2017) Forecasting blast-induced ground vibration developing a CART model. Engineering with Computers, 33, 307-316.

[37]. Salimi A., Faradonbeh, R.S. Monjezi M., & Moormann C., (2018)“TBM performance estimation using a classification and regression tree (CART) technique.” Bulletin of Engineering Geology and the Environment, 77, 429-440

[38]. J.P. Bharti, P. Mishra, U. Moorthy, V.E. Sathishkumar, Y. Cho, & P. Samui, 2021 Slope stability analysis using Rf, gbm, cart, bt, and xgboost. Geotechnical and Geological Engineering, 39, 3741-3752

[39]. Friedman, J. H. (1991) Multivariate adaptive regression splines. The Annals of Statistics, 19(1), 1-67

[40]. Litinetski, V. V. and Abramzon, B. M. (1998). MARS-A multistart adaptive random search method for global constrained optimization in engineering applications. Engineering optimization, 30(2), 125-154.

[41]. Shevtsov, I., Markine, V., and Esveld, C. (2002). Optimization of railway wheel profile using MARS method. In 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference

[42]. Quirós, E., Felicísimo, Á. M., and Cuartero, A. (2009). Testing multivariate adaptive regression splines (MARS) as a method of land cover classification of TERRA-ASTER satellite images. Sensors, 9(11), 9011-9028.

[43]. Samui, P. (2013). Multivariate adaptive regression spline (Mars) for prediction of elastic modulus of jointed rock mass. Geotechnical and Geological Engineering, 31, 249-253.

[44]. Fattahi, H., Hasanipanah, M., & Zandy Ilghani, N. (2021). Investigating correlation of physico-mechanical parameters and P-wave velocity of rocks: A comparative intelligent study. Journal of Mining and Environment, 12(3), 863-875.

[45]. Köken, E. (2022). Modeling the Throughput of Horizontal Shaft Impact Crushers Using Regression Analyses, Artificial Neural Networks and Multivariate Adaptive Regression Spline. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 22(5), 1193-1203.

[46]. Fu, L. and Peng, Z. (2023). An Improved Multivariate Adaptive Regression Splines (MARS) Method for Prediction of Compressive Strength of High-Strength (HS) Concrete. Arabian Journal for Science and Engineering, 48(4), 4511-4530.

[47]. Yilmaz, I. and Yuksek, G. (2009). Prediction of the strength and elasticity modulus of gypsum using multiple regression, ANN, and ANFIS models. International journal of rock mechanics and mining sciences, 46(4), 803-810.

[48]. Roy, D. G. and Singh, T. N. (2020). Predicting deformational properties of Indian coal: Soft computing and regression analysis approach. Measurement, 149, 106975.

[49]. Saadat, M. and Bayat, M. (2022). Prediction of the unconfined compressive strength of stabilised soil by Adaptive Neuro Fuzzy Inference System (ANFIS) and Non-Linear Regression (NLR). Geomechanics and Geoengineering, 17(1), 80-91.

[50]. Behnamfard, A. and Alaei, R. (2017). Estimation of coal proximate analysis factors and calorific value by multivariable regression method and adaptive neuro-fuzzy inference system (ANFIS). International Journal of Mining and Geo-Engineering, 51(1), 29-35.

[51]. Jang JSR (1992) Neuro-fuzzy modeling: architecture, analyses and applications, dissertation, department of electrical engineering and computer science, University of California, Berkeley, CA 94720.

[52]. Singh, V. K., Singh, D., & Singh, T. N. (2001). Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks. International Journal of Rock Mechanics and Mining Sciences, 38(2), 269-284.

[53]. Rabbani, E., Sharif, F., Koolivand Salooki, M., & Moradzadeh, A. (2012). Application of neural network technique for prediction of uniaxial compressive strength using reservoir formation properties. International journal of rock mechanics and mining sciences, 56, 100-111.

[54]. Alotaibi, K., Ghumman, A. R., Haider, H., Ghazaw, Y. M., & Shafiquzzaman, M. (2018). Future predictions of rainfall and temperature using GCM and ANN for arid regions: a case study for the Qassim Region, Saudi Arabia. Water, 10(9), 1260.

[55] Köken, E. and Kadakçı Koca, T. (2022) Evaluation of Soft Computing Methods for Estimating Tangential Young Modulus of Intact Rock Based on Statistical Performance Indices. Geotechnical and Geological Engineering 40, 3619–3631. https://doi.org/10.1007/s10706-022-02112-x.

[56]. Ferreira, C. (2001) Gene expression programming: a new adaptive algorithm for solving problems, Complex Systems, 13(2), 87-129.

[57]. Jahed Armaghani, D., Safari, V., Fahimifar, A., Mohd Amin, M. F., Monjezi, M., & Mohammadi, M. A. (2018). Uniaxial compressive strength prediction through a new technique based on gene expression programming. Neural Computing and Applications, 30, 3523-3532.

[58]. Shakeri, J., Shokri, B. J., & Dehghani, H. (2020). Prediction of blast-induced ground vibration using gene expression programming (GEP), artificial neural networks (ANNS), and linear multivariate regression (LMR). Archives of Mining Sciences, 65(2), 317 – 335

[59]. Köken, E. and Lawal, A. I. (2021). Investigating the effects of feeding properties on rock breakage by jaw crusher using response surface method and gene expression programming. Advanced Powder Technology, 32(5), 1521-1531.

[60]. Namazi, E., Hajihassani, M., Gilani, S. O., & Zolfegharifar, S. Y. (2022). Risk assessment of building damage induced by tunnelling through a gene expression programming model. Geotechnical and Geological Engineering, 1-14.

[61]. Deere, D.U. and Miller, R.P. (1966) Engineering Classification and Index Properties for Intact Rocks, AFWL-TR-65-116. Defense Technical Information Center, Fort Belvoir, VA

[62]. Anon, O. H. (1979). Classification of rocks and soils for engineering geological mapping. Part 1: rock and soil materials. Bulletin of the International Association of Engineering Geology, 19(1), 364-437.

[63]. Jinglan, L., Chengli, Z., & Zhihao, Q. (1999). Volcanic reservoir rocks: A case study of the Cretaceous Fenghuadian suite, Huanghua basin, eastern China. Journal of Petroleum Geology, 22(4), 397-416.

[64]. Spieler, O., Kennedy, B., Kueppers, U., Dingwell, D. B., Scheu, B., & Taddeucci, J. (2004). The fragmentation threshold of pyroclastic rocks. Earth and Planetary Science Letters, 226(1-2), 139-148.

[65]. Ceryan, S., Tudes, S., & Ceryan, N. (2008). A new quantitative weathering classification for igneous rocks. Environmental geology, 55, 1319-1336.

[66]. Pola, A., Crosta, G., Fusi, N., Barberini, V., & Norini, G. (2012). Influence of alteration on physical properties of volcanic rocks. Tectonophysics, 566, 67-86.