The Effect of Soil and Grout Mixture on the Ground Surface Settlement in Mechanized Excavation | ||
| Journal of Mining and Environment | ||
| مقاله 25، دوره 15، شماره 4، دی 2024، صفحه 1607-1626 اصل مقاله (10.58 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2024.14136.2666 | ||
| نویسندگان | ||
| Faezeh Barri1؛ Hamid Chakeri* 1؛ Mohammad Darbor1؛ Hamed Haghkish2 | ||
| 1Department of Mining Engineering, Sahand University of Technology, Tabriz, Iran | ||
| 2Department of Construction Management, Islamic Azad University, Tabriz, Iran | ||
| چکیده | ||
| Excavation with Tunnel Boring Machine (TBM) in urban environments can have risks, such as ground surface settlement. The empty space between the cutterhead and the segment should be filled with suitable grout during the excavation. Nowadays, using grout behind the segment and other fillers fill the empty space behind the segment and reduce the amount of ground surface settlement. Undoubtedly, using a grout with appropriate mechanical behavior can be a suitable substitute for excavated soil in mechanized tunneling. In this research, the mechanical behavior of the grout behind the segment during injection into the space between the soil and the segment and its mixture with the soil is studied. Also, the effect of mechanical properties of grout mixed with soil on the ground surface settlement is investigated using numerical modeling. The components of two-component grout of this study comprises Sufian type 2 cement with 28-day strength of 44 MPa and density of 3050 kg/m3, Salafchegan bentonite with density of 2132 kg/m3 and precipitator of liquid sodium silicate with density of the solution 1500 kg/m3. The results of the laboratory studies indicated that mixing the grout and soil increases the mechanical properties of grout significantly. Increasing the soil in the mixture of soil and grout up to 40% increases the uniaxial compressive strength up to 300%, the elasticity of modulus up to 156% and the cohesion of the mixture up to 100%. On the other hand, based on the results of numerical modeling, the proper injection pressure can significantly reduce the ground surface settlement. Increasing the injection pressure from 0 to 120 kPa has a 17% influence on the reduction of ground surface settlement. | ||
| کلیدواژهها | ||
| Mechanized excavation؛ Grout؛ Ground surface settlement؛ Mechanical properties؛ Finite element method | ||
| مراجع | ||
|
[1]. Sharghi, M., Chakeri, H., & Ozcelik, Y. (2017). Investigation into the effects of two component grout properties on surface settlements. Tunnelling and Underground Space Technology, 63, 205-216.
[2]. André, L., Bacquié, C., Comin, G., Ploton, R., Achard, D., Frouin, L., & Cyr, M. (2022). Improvement of two-component grouts by the use of ground granulated blast furnace slag. Tunnelling and Underground Space Technology, 122, 104369.
[3]. Song, W., Zhu, Z., Pu, S. h., Wan, Y., Huo, W., & Peng, Y. (2022). Preparation and engineering properties of alkali-activated filling grouts for shield tunnel. Construction and Building Materials, 314, 125620.
[4]. Bezuijen, A., & Talmon, A. M. (2008). Processes around a TBM. Geotechnical Aspects of Underground Construction in Soft Ground, Shanghai, China, 1–11.
[5]. Dias, T. G. S., & Bezuijen, A. (2015). TBM Pressure Models - Observations, Theory and Practice. 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Buenos Aires, Argentina, 347–374.
[6]. Zheng, G., Zhang, T., & Diao, Y. (2015). Mechanism and countermeasures of preceding tunnel distortion induced by succeeding EPBS tunnelling in close proximity. Computers and Geotechnics, 66 (5), 53–65.
[7]. Ding, W., Duan, C., Zhu, Y., Zhao, T., Huang, D., & Li, P. (2019). The behavior of synchronous grouting in a quasi-rectangular shield tunnel based on a large visualized model test. Tunnelling and Underground Space Technology, 83, 409–424.
[8]. He, S., Lai, J., Wang, L., & Wang, K. (2020). A literature review on properties and applications of grouts for shield tunnel. Construction and Building Materials, 239, 117782.
[9]. Mao, J. H., Yuan, D. J., Jin, D. L., & Zeng, J. F. (2020). Optimization and application of backfill grouting material for submarine tunnel. Construction and Building Materials, 265, 120281.
[10]. Oreste, P., Sebastiani, D., Spagnoli, G., & Lillis., A. (2021). Analysis of the behavior of the two-component grout around a tunnel segmental lining on the basis of experimental results and analytical approaches. Transportation Geotechnics, 29, 100570.
[11]. Anagnostopoulos, C. A. (2005). Laboratory study of an injected granular soil with polymer grouts. Tunnelling and Underground Space Technology, 20 (6), 525-533.
[12]. Flores, A. Q. (2015). Physical and mechanical behavior of a two-component cement-based grout for mechanized tunneling application. MSc Thesis, Universidad Federal do Rio de Janeiro, Brazil.
[13]. Todaro, C., Peila, L., Luciani, A., Carigi, A., Martinelli, D., & Boscaro, A. (2019). Two component backfilling in shield tunneling: laboratory procedure and results of a test campaign. In Proceedings of the WTC 2019 ITA-AITES World Tunnel Congress (WTC 2019), Naples, Italy.
[14]. Sharghi, Mohammad, Chakeri, H., Afshin, H., & Ozcelik, Y. (2018). An experimental study of the performance of two-component backfilling grout used behind the segmental lining of a tunnel-boring machine. Journal of Testing and Evaluation, 46 (5), 2083-2099.
[15]. Todaro, C., Carigi, A., Martinelli, D., & Peila, D. (2021). Study of the shear strength evolution over time of two-component backfilling grout in shield tunnelling. Case Studies in Construction Materials, 15, e00689.
[16]. Oggeri, C., Oreste, P., & Spagnoli, G. (2021). The influence of the two-component grout on the behaviour of a segmental lining in tunnelling. Tunnelling and Underground Space Technology, 109, 103750.
[17]. Rahmati, S., Chakeri, H., Sharghi, M., & Dias, D. (2022). Experimental study of the mechanical properties of two-component backfilling grout. Proceedings of the Institution of Civil Engineers-Ground Improvement,175 (4), 277–289.
[18]. Fu, J., Haeri, H., Sarfarazi, V., Mehri, M., Asgari, K., & Fatehi Marji, M. (2022). Effects of transversely isotropic layers on failure mechanism of non-homogeny concrete-soil specimens. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8, 163.
[19]. Sarfarazi, V., Tabaroei, A., & Asgari, K. (2022). Discrete element modeling of strip footing on geogrid-reinforced soil. Geomechanics and Engineering, 29, 435–449.
[20]. Fu, J., Safaei, M. R., Haeri, H., Sarfarazi, V., Fatehi Marji, M., Xu, L., & Arefnia, A. (2022). Experimental investigation on deformation behavior of circular underground opening in hard soil using a 3D physical model. Journal of Mining and Environment, 13, 727-749.
[21]. Liu, W., Liang, J., & Xu, T. (2023). Tunnelling-induced ground deformation subjected to the behavior of tail grouting materials. Tunnelling and Underground Space Technology, 140, 105253.
[22]. Barri, F., Chakeri, H., Haghkish, H., & Manafi, M. (2024). Investigation of the Feasibility of Increasing the Tail-grouting Zone during Mechanized Tunneling in Sandy Soils. Periodica Polytechnica Civil Engineering, 68 (2).
[23]. Ghobadi, M.H., Firuzi, M., & Asghari, E. (2016). Relationships between geological formations and ground water chemistry and their effects on concrete lining of tunnels (case study: Tabriz metro line 2). Environmental Earth Science, 75, 2–14.
[24]. Kutzner, Ch. (1996). Grouting of rock and soil. CRC Press, London.
[25]. American Society for Testing and Materials. (1999). Standard test method for expansion and bleeding of freshly mixed grouts for preplaced-aggregate concrete in the laboratory (ASTM C940).
[26]. American Society for Testing and Materials. (2004). Standard test method for marsh funnel viscosity of clay construction slurries (ASTM D6910).
[27]. American Society for Testing and Materials. (2008). Standard test method for compressive strength of hydraulic cement mortars (ASTM C109).
[28]. American Society for Testing and Materials. (2011). Standard test method for direct shear test of soils under consolidated drained conditions (ASTM D3080). | ||
|
آمار تعداد مشاهده مقاله: 102 تعداد دریافت فایل اصل مقاله: 86 |
||