سامانه مدیریت نشریات علمی دانشگاه صنعتی شاهرود

Jalalian, Mohammad Hossein, Bagherpour, Raheb, Khoshouei, Mehrbod, Almasi, S. Najmedin. (1403). Developing a New Model for Predicting Specific Energy (SE) for Economic and Environmental Optimization of the Diamond Wire Cutting Operation. , 16(1), 307-319. doi: 10.22044/jme.2024.14303.2672
Mohammad Hossein Jalalian; Raheb Bagherpour; Mehrbod Khoshouei; S. Najmedin Almasi. "Developing a New Model for Predicting Specific Energy (SE) for Economic and Environmental Optimization of the Diamond Wire Cutting Operation". , 16, 1, 1403, 307-319. doi: 10.22044/jme.2024.14303.2672
Jalalian, Mohammad Hossein, Bagherpour, Raheb, Khoshouei, Mehrbod, Almasi, S. Najmedin. (1403). 'Developing a New Model for Predicting Specific Energy (SE) for Economic and Environmental Optimization of the Diamond Wire Cutting Operation', , 16(1), pp. 307-319. doi: 10.22044/jme.2024.14303.2672
Jalalian, Mohammad Hossein, Bagherpour, Raheb, Khoshouei, Mehrbod, Almasi, S. Najmedin. Developing a New Model for Predicting Specific Energy (SE) for Economic and Environmental Optimization of the Diamond Wire Cutting Operation. , 1403; 16(1): 307-319. doi: 10.22044/jme.2024.14303.2672

Developing a New Model for Predicting Specific Energy (SE) for Economic and Environmental Optimization of the Diamond Wire Cutting Operation

Journal of Mining and Environment
مقاله 18، دوره 16، شماره 1، فروردین 2025، صفحه 307-319    اصل مقاله (7.11 M)
نوع مقاله: Original Research Paper
شناسه دیجیتال (DOI): 10.22044/jme.2024.14303.2672
نویسندگان
Mohammad Hossein Jalalian1؛ Raheb Bagherpour* 1؛ Mehrbod Khoshouei1؛ S. Najmedin Almasi2
1Department of Mining Engineering, Isfahan University of Technology, Isfahan, Iran
2Department of Mining Engineering, Lorestan University, Lorestan, Iran
چکیده
Diamond wire cutting is a common method to extract dimension stones, which depends on various factors, including the mechanical and physical properties of the stone, cutting specifications, and operational characteristics. Specific energy, production rate, efficiency, and wear of diamond beads are some of the criteria that influence economic and environmental optimization of diamond wire cutting operations. In this study, the specific energy of the diamond wire cutting process was measured for 11 samples of Granite stones. By analyzing the impact of parameters such as stone density, porosity, and cutting rate on energy consumption, a linear regression model was developed with a correlation coefficient (R2) of 0.944 to predict specific energy for different types of stones. Statistical analyses, including ANOVA, have confirmed that the model accurately predicts specific energy values. Data from three new stone samples were used to validate the model, and their predicted energy values were compared with actual values. The model presented achieved an R2 value of 0.827, demonstrating its high accuracy. The results indicate that energy consumption in dimension stone cutting operation can be accurately predicted and characterized indirectly using high precision stone properties and operational parameters. This method can accurately and indirectly monitor energy consumption and cutting machine performance during the dimension stone cutting operation and can be used to optimize economic and environmental aspects of this process.
کلیدواژه‌ها
Specific Energy؛ Diamond Wire Cutting؛ Dimension stone؛ economic and environmental optimization؛ Predicting
مراجع
  • Bagherpour, R., A. Khademian, S.N. Almasi, and M. Aalaei (2014). Optimum cutting wire assembly in dimension stone quarries. Journal of Mining and Metallurgy A: Mining. 50(1): 1-8.
  • Jalalian, M.H., R. Bagherpour, and M. Khoshouei (2024). Geological investigations and production planning by identification of the discontinuities and rock mass blocks in dimension stone quarries: a case study. Rudarsko-geološko-naftni zbornik. 39(2): 85-95.
  • Yarahmadi, R., R. Bagherpour, A. Khademian, L.M. Sousa, S.N. Almasi, and M.M. Esfahani (2019). Determining the optimum cutting direction in granite quarries through experimental studies: a case study of a granite quarry. Bulletin of Engineering Geology and the Environment. 78(1): 459-467.
  • Shekhar, M. and S. Yadav (2020). Diamond abrasive based cutting tool for processing of advanced engineering materials: a review. Materials Today: Proceedings. 22: 3126-3135.
  • Khoshouei, M., M.H. Jalalian, and R. Bagherpour (2020). The effect of geological properties of dimension stones on the prediction of Specific Energy (SE) during diamond wire cutting operations. -Geol.-Naft. Zb. 35(3).
  • Jalalian, M.H., R. Bagherpour, and M. Khoshouei (2023). Environmentally sustainable mining in quarries to reduce waste production and loss of resources using the developed optimization algorithm. Scientific Reports. 13(1): 22183.
  • Jalalian, M.H., R. Bagherpour, and M. Khoshouei (2021). Wastes production in dimension stones industry: resources, factors, and solutions to reduce them. Environmental Earth Sciences. 80: 1-13.
  • Usta, F.N. and S. Dhami (2023). Productivity improvement in a sand stone cutting industry–A case study. Materials Today: Proceedings.
  • Almasi, S.N., R. Bagherpour, R. Mikaeil, Y. Ozcelik, and H. Kalhori (2017). Predicting the building stone cutting rate based on rock properties and device pullback amperage in quarries using M5P model tree. Geotechnical and Geological Engineering. 35: 1311-1326.
  • Almasi, S.N., R. Bagherpour, R. Mikaeil, and Y. Ozcelik (2017). Developing a new rock classification based on the abrasiveness, hardness, and toughness of rocks and PA for the prediction of hard dimension stone sawability in quarrying. Geosystem Engineering. 20(6): 295-310.
  • Ozcelik, Y., E. Polat, F. Bayram, and A. Ay (2004). Investigation of the effects of textural properties on marble cutting with diamond wire. International Journal of Rock Mechanics and Mining Sciences. 41: 228-234.
  • Ersoy, A. and U. Atici (2005). Specific energy prediction for circular diamond saw in cutting different types of rocks using multivariable linear regression analysis. Journal of Mining Science. 41(3): 240-260.
  • Mikaeil, R., M. Ataei, and S. Hoseinie (2008). Predicting the production rate of diamond wire saws in carbonate rock cutting. Industrial diamond review.(3).
  • Ozcelik, Y. and E. Yilmazkaya (2011). The effect of the rock anisotropy on the efficiency of diamond wire cutting machines. J. Rock. Mech. Min. Sci. 48(4): 626-636.
  • Yurdakul, M. and H. Akdas (2012). Prediction of specific cutting energy for large diameter circular saws during natural stone cutting. International Journal of Rock Mechanics and Mining Sciences. 53: 38-44.
  • Ataei, M., R. Mikaiel, F. Sereshki, and N. Ghaysari (2012). Predicting the production rate of diamond wire saw using statistical analysis. Arabian Journal of Geosciences. 5: 1289-1295.
  • Ghaysari, N., M. Ataei, F. Sereshki, and R. Mikaiel (2012). Prediction of performance of diamond wire saw with respect to texture characteristics of rock. Archives of Mining Sciences. 57(4).
  • Huang, G. and X. Xu (2013). Sawing performance comparison of brazed and sintered diamond wires. Chinese journal of mechanical engineering. 26(2): 393-399.
  • Sadegheslam, G., R. Mikaeil, R. Rooki, S. Ghadernejad, and M. Ataei (2013). Predicting the production rate of diamond wire saws using multiple nonlinear regression analysis. Geosystem engineering. 16(4): 275-285.
  • Yarahmadi, R., R. Bagherpour, and A. Khademian (2014). Safety risk assessment of Iran’s dimension stone quarries (Exploited by diamond wire cutting method). Safety Science. 63: 146-150.
  • Karakurt, I. (2014). Specific energy optimization in sawing of rocks using Taguchi approach. Journal of Central South University. 21(1): 365-372.
  • Yurdakul, M. (2015). Effect of cutting parameters on consumed power in industrial granite cutting processes performed with the multi-disc block cutter. International Journal of Rock Mechanics and Mining Sciences. 76: 104-111.
  • Yilmazkaya, E. and Y. Ozcelik (2016). The effects of operational parameters on a mono-wire cutting system: efficiency in marble processing. Rock Mechanics and Rock Engineering. 49(2): 523-539.
  • Turchetta, S., L. Sorrentino, and C. Bellini (2017). A method to optimize the diamond wire cutting process. Diamond and Related Materials. 71: 90-97.
  • Almasi, S.N., R. Bagherpour, R. Mikaeil, and Y. Ozcelik (2017). Analysis of bead wear in diamond wire sawing considering the rock properties and production rate. Bulletin of Engineering Geology and the Environment. 76(4): 1593-1607.
  • Mikaeil, R., S. Shaffiee Haghshenas, M. Ataei, and S. Shaffiee Haghshenas. The application of multivariate regression analysis to predict the performance of diamond wire saw. in 25th international mining congress and exhibition of Turkey. 2017.
  • Yilmazkaya, E., G. Dagdelenler, Y. Ozcelik, and H. Sonmez (2018). Prediction of mono-wire cutting machine performance parameters using artificial neural network and regression models. Engineering geology. 239: 96-108.
  • Mikaeil, R., Y. Ozcelik, M. Ataei, and S. Shaffiee Haghshenas (2019). Application of harmony search algorithm to evaluate performance of diamond wire saw. Journal of Mining and Environment. 10(1): 27-36.
  • Akhyani, M., R. Mikaeil, F. Sereshki, and M. Taji (2019). Combining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process. Journal of Mining and Environment. 10(3): 559-574.
  • Rajpurohit, S.S., R.K. Sinha, and P. Sen (2020). Influence of Cerchar hardness index of hard rock granite on wear of diamond tools. Materials Today: Proceedings. 33: 5471-5475.
  • Ziaei, J., S. Ghadernejad, A. Jafarpour, and R. Mikaeil (2020). A Modified Schimazek’s F-abrasiveness Factor for Evaluating Abrasiveness of Andesite Rocks in Rock Sawing Process. Journal of Mining and Environment. 11(2): 563-575.
  • Gupta, R. and B. Pratap (2021). Diamond tools processing for marble and granite: Cutting & wear. Materials Today: Proceedings. 46: 2135-2140.
  • Amirsharafi, A., M. Noroozi, and F. Sereshki (2023). Investigation of Cutting Rate of Diamond Wire Saw Machine Using Numerical Modeling. Rock Mechanics and Rock Engineering. 56(10): 7301-7314.
  • Rezaei, M. and N. Nyazyan (2023). Assessment of effect of rock properties on horizontal drilling rate in marble quarry mining: field and experimental studies. Journal of Mining and Environment. 14(1): 321-339.
  • Yurdakul, M., K. Gopalakrishnan, and H. Akdas (2014). Prediction of specific cutting energy in natural stone cutting processes using the neuro-fuzzy methodology. International Journal of Rock Mechanics and Mining Sciences. 67: 127-135.
  • Khoshouei, M., R. Bagherpour, and M.H. Jalalian (2022). Rock type identification using analysis of the acoustic signal frequency contents propagated while drilling operation. Geotechnical and Geological Engineering. 40(3): 1237-1250.
  • Hosseini, S.H., M. Ataie, and H. Aghababaie (2014). A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills. Journal of mining and environment. 5(1): 25-34.
  • Cassapi, V., Application of rock hardness and abrasive indexing to rock excavating equipment selection. 1987, University of Nottingham.
  • Hatheway, A.W., The complete ISRM suggested methods for rock characterization, testing and monitoring; 1974–2006. 2009, Association of Environmental & Engineering Geologists.
  • Verhoef, P.N., Wear of rock cutting tools: implications for the site investigation of rock dredging projects. 2017: Routledge.
  • Schimazek, J. and H. Knatz (1970). The influence of rock composition on cutting velocity and chisel wear of tunneling machines. J Glückauf. 106: 274-278.
  • Khoshouei, M., R. Bagherpour, H. Sadeghisorkhani, and M.H. Jalalian (2022). A new look at hard rock abrasivity evaluation using acoustic emission technique (AET). Rock Mechanics and Rock Engineering. 55(4): 2425-2443.
آمار
تعداد مشاهده مقاله: 167
تعداد دریافت فایل اصل مقاله: 156