The Applicability of Rock Bolt Supporting Factor based on Rock Mass Behavior: A Case Study of Alborz Tunnel | ||
| Journal of Mining and Environment | ||
| مقاله 12، دوره 16، شماره 2، خرداد 2025، صفحه 599-611 اصل مقاله (1.4 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2024.14405.2697 | ||
| نویسندگان | ||
| Hamed Farajollahi1؛ Mohammad Mohammadi2؛ Mohammad Hossein Khosravi* 3 | ||
| 1School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran. | ||
| 2Division of Soil and Rock Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden. | ||
| 3Department of Mining Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran. | ||
| چکیده | ||
| A better understanding of rock mass behavior is an essential part of the design and construction of underground structures. Any improvement in the understanding of the behavior of rock mass will facilitate the improvement of the design in terms of the safety of the working environment, long-term safety of the structure, environmental effects, and sound management of public or private resources. Thus, in step one in this paper the experience gained from the application of the GDE (Geo Data Engineering) multiple graph approach for rock mass classification and assessment of its behavior through the course of excavation of the Alborz tunnel is presented. The predicted hazards are compared with the experienced problems and suggestions are given to be considered in future works of tunnel construction. In step two, the GDE multiple graph approach is compared to the rock mass behavior types proposed by Palmstrom & Stille (2007) in terms of the continuity of rock mass. The result of this comparison together with the data obtained from rock mass classification in the Alborz tunnel are used to develop a system that determines the applicability of the rock bolt supporting factor (RSF) in different rock mass behavior classes. | ||
| کلیدواژهها | ||
| Rock mass behavior؛ GDE multiple graph؛ Rock Mass Rating system (RMR)؛ Rock Bolt Supporting Factor (RSF)؛ Alborz tunnel | ||
| مراجع | ||
|
[1]. Bieniawski, Z. T. (1989). Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. John Wiley & Sons.
[2]. Barton, N., Lien, R., & Lunde, J. J. R. M. (1974). Engineering classification of rock masses for the design of tunnel support. Rock mechanics, 6, 189-236.
[3]. Bieniawski, Z. T. (1973). Engineering classification of jointed rock masses. Civil Engineering= Siviele Ingenieurswese, 1973(12), 335-343.
[4]. Deere, D. U., Hendron, A. J., Patton, F. D., & Cording, E. J. (1966, September). Design of surface and near-surface construction in rock. In ARMA US Rock Mechanics/Geomechanics Symposium (pp. ARMA-66). ARMA.
[5]. Hoek, E., Kaiser, P. K., & Bawden, W. F. (2000). Support of underground excavations in hard rock. CRC Press.
[6]. Lauffer, H. (1958). Classification for tunnel construction. Geologie und Bauwesen, 24(1), 46-51.
[7]. Palmstrøm, A. (1996). Characterizing rock masses by the RMi for use in practical rock engineering: Part 1: The development of the Rock Mass index (RMi). Tunnelling and underground space technology, 11(2), 175-188.
[8]. Palmstrøm, A. (1996). Characterizing rock masses by the RMi for use in practical rock engineering, part 2: some practical applications of the rock mass index (RMi). Tunnelling and underground space technology, 11(3), 287-303.
[9]. Terzaghi, K. (1946). Rock defects and loads on tunnel supports. Rock tunneling with steel supports.
[10]. Wickham, G. E., Tiedemann, H. R., & Skinner, E. H. (1972, June). Support determinations based on geologic predictions. In N Am Rapid Excav & Tunnelling Conf Proc (Vol. 1).
[11]. Aydan, Ö., Ulusay, R., & Tokashiki, N. (2014). A new rock mass quality rating system: rock mass quality rating (RMQR) and its application to the estimation of geomechanical characteristics of rock masses. Rock mechanics and rock engineering, 47, 1255-1276.
[12]. Bar, N., & Barton, N. (2017). The Q-slope method for rock slope engineering. Rock Mechanics and Rock Engineering, 50, 3307-3322.
[13]. Barton, N., & Bar, N. (2019, September). The Q-slope method for rock slope engineering in faulted rocks and fault zones. In ISRM Congress (pp. ISRM-14CONGRESS). ISRM.
[14]. Hoek, E., Carter, T. G., & Diederichs, M. S. (2013, June). Quantification of the geological strength index chart. In ARMA US Rock Mechanics/Geomechanics Symposium (pp. ARMA-2013). ARMA.
[15]. Laubscher, D. H., & Jakubec, J. (2001). The MRMR rock mass classification for Jointed Rock Masses. Underground mining methods: engineering fundamentals and international case studies, 475-481.
[16]. Maazallahi, V., & Majdi, A. (2021). Directional rock mass rating (DRMR) for anisotropic rock mass characterization. Bulletin of Engineering Geology and the Environment, 80, 4471-4499.
[17]. Marinos, V. (2019). A revised, geotechnical classification GSI system for tectonically disturbed heterogeneous rock masses, such as flysch. Bulletin of Engineering Geology and the Environment, 78, 899-912.
[18]. Mohammadi, M. (2021, October). Application of Rock Mass Rating system in underground intersections. In IOP Conference Series: Earth and Environmental Science (Vol. 861, No. 5, p. 052081). IOP Publishing.
[19]. Saroglou, C., Qi, S., Guo, S., & Wu, F. (2019). ARMR, a new classification system for the rating of anisotropic rock masses. Bulletin of Engineering Geology and the Environment, 78, 3611-3626.
[20]. Sonmez, H., & Ulusay, R. (1999). Modifications to the geological strength index (GSI) and their applicability to stability of slopes. International Journal of Rock Mechanics and Mining Sciences, 36(6), 743-760.
[21]. Rezaei, M., & Habibi, H. (2023). Designing of the Beheshtabad water transmission tunnel based on the hybrid empirical method. Structural Engineering and Mechanics, 86(5), 621-633.
[22]. Palmstrom, A., & Stille, H. (2007). Ground behaviour and rock engineering tools for underground excavations. Tunnelling and Underground Space Technology, 22(4), 363-376.
[23]. Stille, H., & Palmström, A. (2003). Classification as a tool in rock engineering. Tunnelling and underground space technology, 18(4), 331-345.
[24]. Stille, H., & Palmström, A. (2008). Ground behaviour and rock mass composition in underground excavations. Tunnelling and Underground Space Technology, 23(1), 46-64.
[25]. Russo, G., & Grasso, P. (2007, July). On the classification of the rock mass excavation behaviour in tunneling. In ISRM Congress (pp. ISRM-11CONGRESS). ISRM.
[26]. Russo, G. (2008). A simplified rational approach for the preliminary assessment of the excavation behaviour in rock tunnelling. Tunnels et ouvrages souterrains, 207(May-June).
[27]. Russo, G. (2014). An update of the “multiple graph” approach for the preliminary assessment of the excavation behaviour in rock tunnelling. Tunnelling and underground space technology, 41, 74-81.
[28]. Russo, G. (2014). An update of the “multiple graph” approach for the preliminary assessment of the excavation behaviour in rock tunnelling. Tunnelling and underground space technology, 41, 74-81.
[29]. Mohammadi, M., Hossaini, M. F., & Bagloo, H. (2017). Rock bolt supporting factor: rock bolting capability of rock mass. Bulletin of engineering geology and the environment, 76, 231-239.
[30]. Mohammadi, M., & Hossaini, M. F. (2017). Modification of rock mass rating system: Interbedding of strong and weak rock layers. Journal of rock mechanics and geotechnical engineering, 9(6), 1165-1170.
[31]. Antolović, M., Filipović, A., & Amadini, F. (2013). Engineering geological behaviour of rock mass in Chenani-Nashri tunnel, the longest Road tunnel in India. In Tunnelling in Mediterranean Region.
[32]. Decman, A., Stella, F., & Verzani, L. P. (2013, May). Geomechanical follow-up of E1 Teniente new mine level access tunnels. ITA symposium Croatia.
[33]. Palomba, M., Russo, G., Amadini, F., Carrieri, G., & Jain, A. R. (2013, May). Chenani-Nashri Tunnel, the longest road tunnel in India: a challenging case for design-optimization during construction. In World Tunnel Congress 2013. Underground-the way to the future (pp. 964-971).
[34]. Kontrec, P., & Constandinidis, V. (2013, May). Engineering geological characterization of the rock mass in the Adit P4600. In Project El Teniente, Chile, ITA symposium Croatia (pp. 7-8).
[35]. Mohammad, S., Hossaini, F., Mohammadi, M., & Askari, M. (2018). Interpretation of Rock Mass Behaviour via" Multiple Graph" Approach: Adit P-C9 of the Alborz Tunnel.
[36]. Habenicht, H. (2021). The anchoring effects–Our present knowledge and its shortcomings: A keynote lecture. Rock bolting: Theory and application in mining and underground construction, 257-268.
[37]. Tehran-Shomal Freeway Co. (2018), “Detailed reports and maps of Alborz tunnel.,” Tehran, Iran.
[38]. Stille, H., Holmberg, M., & Nord, G. (1989, January). Support of weak rock with grouted bolts and shotcrete. In International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts (Vol. 26, No. 1, pp. 99-113). Pergamon. | ||
|
آمار تعداد مشاهده مقاله: 390 تعداد دریافت فایل اصل مقاله: 307 |
||