Real-Time Monitoring and Alarm System for Toxic Gas in Underground Coal Mines Using Smart Helmets | ||
| Journal of Mining and Environment | ||
| مقاله 15، دوره 16، شماره 2، خرداد 2025، صفحه 653-665 اصل مقاله (3.37 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2024.14576.2746 | ||
| نویسندگان | ||
| Daniyal Ghadyani1؛ Amirhossein Badraddini1؛ Mohammad Mirzehi Kalateh Kazemi2؛ Vahab Sarfarazi3؛ Hadi Haeri4؛ Jinwei Fu5؛ Sohrab Naser Mostofi2؛ Vahid Khodabandeloo6؛ Mohammad Fatehi Marji* 7 | ||
| 1Department of Mining Engineering, Amirkabir University of Technology, Tehran, Iran | ||
| 2Department of Mining Engineering, Tarbiat Modares University, Tehran, Iran | ||
| 3Faculty of Mining Engineering, Hamedan University of Technology, Hamedan, Iran | ||
| 4Department of Mining Engineering, Higher Education Complex of Zarand, Shahid Bahonar University of Kerman, Kerman, Iran | ||
| 5School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power, Zhengzhou, 450046, China | ||
| 6Department of Mining Engineering, Tehran University, Tehran, Iran | ||
| 7Department of Mine Exploitation Engineering, Faculty of Mining and Metallurgy, Institute of Engineering, Yazd University, Yazd, Iran | ||
| چکیده | ||
| Regarding the hazard-prone working conditions in underground mines, synchronous monitoring and alarm system is vital to increase the safety. By analyzing the accidents in underground mines in Iran, it can be deduced that most fatalities are related to gas leakage, objects drop off on the head, and not using helmets by the staff. Therefore, a smart helmet with the capability of measuring harmful gasses (regarding the type of the mine), detection of the existence of the helmet on the head, temperature and humidity measurement, and detection of blow on the head is designed and fabricated to eliminate the present dangers and problems. This system displays the evaluated data on a developed software through wireless data transmission hardware. The data transmission hardware is the primary a link between the intelligent safety helmet and the software. To follow the idea, practical experiments have been performed in Parvadeh four and East Parvadeh of Tabas coal mine to confirm the validity of data transmission that culminated in successful results. The results were altered by the complexity of the design of the underground spaces so that in a straight direction, data transmission was held until 430 meters. However, further progress was not possible due to tunnel limitations. Data transmission was reduced to 190 meters in access horizons with curvatures or tilts. According to present standards, some thresholds are defined for each of the mentioned cases such that alarm protocol is activated by exceeding these thresholds in critical circumstances. Then the helmet user and the software’s operator will be informed of the occurred danger and will settle the problem. The system outlined in this study ensures performance reliability through its alarm package. A key innovation is the in-depth examination of the impact of head injuries, transforming it into other factors by analyzing relevant content and setting boundaries for assessment rather than using specific numbers. Furthermore, the most evident aspect of this design is the enhancement of the managerial approach, which includes an attendance evaluation platform and performance reporting within the system. | ||
| کلیدواژهها | ||
| Underground mines؛ smart safety helmet؛ smart monitoring؛ wireless data transmission | ||
| مراجع | ||
|
[1]. Paul, P. S. (2009). Predictors of work injury in underground mines—an application of a logistic regression model. Mining Science and Technology, 19(3), 282-289.
[2]. Hong, C., Hassan, M., & Gomes, V. (2018). Coal driven carbon nano materials-recent advances in synthesis and applications. Applied Materials Today, 12, 342-358.
[3]. Geng, B., Yang, D., Zheng, F., Zhang, C., Zhan, J., Li, Z., Pan, D., & Wang, L. (2017). Facile conversion of coal tar to orange fluorescent carbon quantum dots and their composite encapsulated by liposomes for bioimaging. New Journal of Chemistry, 41, 14444-14451.
[4]. Srivastava, S. K. (2015). Real time monitoring system for mine safety using wireless sensor network. Ph.D. Dissertation, National Institute of Technology, Rourkela, India.
[5]. Eick, B. (2021). Non-contact monitoring of the tension in partially submerged, miter-gate diagonals. Smart Structures and Systems, 27(2), 33-45.
[6]. Kumar, G. R., & Reddy, B. K. (2018). Internet of things based an intelligent helmet for wireless sensor network. International Journal of Engineering Sciences & Research Technology, 34(3), 66-78.
[7]. Behr, C. J., Kumar, A., & Hancke, G. P. (2016). A smart helmet for air quality and hazardous event detection for the mining industry. 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, Taiwan.
[8]. Borkar, S. P., & Baru, V. B. (2018). IoT based smart helmet for underground mines. International Journal of Research in Engineering, Science and Management (IJESM), 1(9), 55-66.
[9]. Chi, Q., Yan, H., Zhang, C., Pang, Z., & Da Xu, L. (2014). A reconfigurable smart sensor interface for industrial WSN in IoT environment. IEEE Transactions on Industrial Informatics, 10(2), 1417-1425.
[10]. Maity, T., Das, P. S., & Mukherjee, M. (2012). A wireless surveillance and safety system for mine workers based on Zigbee. 2012 1st International Conference on Recent Advances in Information Technology (RAIT), Dhanbad, India.
[11]. Hermanus, M. A. (2007). Occupational health and safety in mining-status, new developments, and concerns. Journal of the Southern African Institute of Mining and Metallurgy, 107(8), 531-538.
[12]. Misra, P., Kanhere, S., Ostry, D., & Jha, S. (2010). Safety assurance and rescue communication systems in high-stress environments: A mining case study. IEEE Communications Magazine, 48(4), 66-73.
[13]. Yarkan, S., Guzelgoz, S., Arslan, H., & Murphy, R. R. (2009). Underground mine communications: A survey. IEEE Communications Surveys & Tutorials, 11(3), 125-142.
[14]. Chehri, A., Fortier, P., & Tardif, P. M. (2009). UWB-based sensor networks for localization in mining environments. Ad Hoc Networks, 7(5), 987-1000.
[15]. Hongjiang, H., & Shuangyou, W. (2008). The application of ARM and ZigBee technology wireless networks in monitoring mine safety system. 2008 ISECS International Colloquium on Computing, Communication, Control, and Management, Guangzhou, China.
[16]. Abu-Mahfouz, A. M., & Hancke, G. P. (2013). An efficient distributed localisation algorithm for wireless sensor networks: based on smart reference–selection method. International Journal of Sensor Networks, 13(2), 94-111.
[17]. Lee, S., & Yun, G. (2013). A statistical reference-free damage identification for real-time monitoring of truss bridges using wavelet-based log likelihood ratios. Smart Structures and Systems, 12(2), 66-78.
[18]. Ruan, J., & Zhang, Z. (2015). An anti-noise real-time cross-correlation method for bolted joint monitoring using piezoceramic transducers. Smart Structures and Systems, 16(2), 99-111.
[19]. Zhou, L. (2018). Real-time condition assessment of railway tunnel deformation using an FBG-based monitoring system. Smart Structures and Systems, 21(5), 111-123.
[20]. Naser, M. Z., & Kodur, K. (2020). Concepts and applications for integrating unmanned aerial vehicles (UAV's) in disaster management. Advances in Computational Design, 5(1), 91-109.
[21]. Park, J. (2021). Development of wireless SHM sensor node for in-flight real-time monitoring using embedded CNT fiber sensors. Smart Structures and Systems, 28(3), 44-57.
[22]. Ruccolo, A. (2021). Monitoring an iconic heritage structure with OMA: the Main Spire of the Milan Cathedral. Smart Structures and Systems, 27(2), 66-77.
[23]. Borlenghi, P. (2021). Detecting and localizing anomalies on masonry towers from low-cost vibration monitoring. Smart Structures and Systems, 27(2), 88-99.
[24]. Kumar, A., & Hancke, G. P. (2014). Energy efficient environment monitoring system based on the IEEE 802.15.4 Standard for low cost requirements. IEEE Sensors Journal, 14(8), 2557-2566.
[25]. Hutchinson, J., Kaiser, M. J., & Lankarani, H. M. (1998). The head injury criterion (HIC) functional. Applied Mathematics and Computation, 96(1), 1-16.
[26]. Chou, C. C., Song, G. S., & Lim, G. G. (1997). Head Injury Criterion (HIC) Calculation Using an Optimization Approach. SAE Technical Paper, 4(2), 99-111.
[27]. Saboori, P., Mansoor-Baghaei, S., & Sadegh, A. M. (2013). Evaluation of head injury criteria under different impact loading. ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, San Diego, California, USA.
[28]. Forooshani, A. E., Bashir, S., Michelson, D. G., & Noghanian, S. (2013). A survey of wireless communications and propagation modeling in underground mines. IEEE Communications Surveys & Tutorials, 15(4), 1524-1545.
[29]. Thombare, D. G. (2019). Computational and Experimental Analysis of Head Injury Criteria (HIC) in Frontal Collision of Car with Pedestrian. SAE Technical Paper, 5(3), 66-77. https://doi.org/10.4271/2019-26-0016
[30]. Thombare, D. G., & Sutaone, M. S. (2018). Performance evaluation of a novel compact microstrip antenna for underground mine wireless communication. AEU - International Journal of Electronics and Communications, 83, 472-480. https://doi.org/10.1016/j.aeue.2017.09.041.
[31]. Kockara, S., Gungor, V. C., & Tuna, G. (2019). Cognitive radio based wireless multimedia sensor networks in smart grid: Architectures, applications and approaches. Wireless Personal Communications, 107(1), 453-473.
[32]. Li, X., Lyu, W., Zhang, S., & Cui, Y. (2019). On-demand multi-path routing for vehicular delay tolerant networks in urban environments. IEEE Transactions on Vehicular Technology, 68(5), 4893-4907.
[33]. Kannan, P. K., Ghosh, S. K., & Prakash, A. (2019). Intelligent transportation systems in smart cities: Frameworks and applications. Sensors, 19(19), 4220.
[34]. Han, S., Wu, Y., & Gao, W. (2020). Predictive analysis of air quality based on deep learning approach. IEEE Access, 8, 87592-87604.
[35]. Ma, Z., Wang, Y., Wu, T., & Liu, H. (2018). Data-driven prediction of air quality under different weather conditions. Atmospheric Pollution Research, 9(5), 862-871.
[36]. Hu, Q., Pan, D., & Wang, L. (2018). The impact of coal combustion on carbon quantum dots in the environment: Mechanisms and implications. Environmental Science: Nano, 5, 1609-1624.
[37]. Bandyopadhyay, L. K., Chaulya, S. K., & Mishra, P. K. (2010). Wireless communication in underground mines. RFID-Based Sens. Kindle Edition. New York, NY, USA. https://link.springer.com/book/10.1007%2F978-0-387-98165-9. | ||
|
آمار تعداد مشاهده مقاله: 386 تعداد دریافت فایل اصل مقاله: 318 |
||