Evaluating how to control the Sediments to be entered the Intake Channels in a 180-degree arc by the Submerged Plates | ||
| Journal of Hydraulic and Water Engineering | ||
| دوره 2، شماره 1، مهر 2024، صفحه 58-73 اصل مقاله (722.84 K) | ||
| نوع مقاله: Original Article | ||
| شناسه دیجیتال (DOI): 10.22044/jhwe.2024.13752.1030 | ||
| نویسندگان | ||
| Sajad Amiri* 1؛ Roozbeh Aghamajidi2 | ||
| 1MSc of Hydraulic Structure, Islamic Azad University, Shushtar Branch, Shushtar, Iran | ||
| 2Assistant Professor, Islamic Azad University, Sepidan branch, Sepidan, Iran. | ||
| چکیده | ||
| A method that is very helpful for controlling and reducing the sediments entering the intake is to use submerged plates. They are small walls made of metal, wood, etc., installed at a well-defined angle to the orientation of the water flow, creating a rotational flow surrounding themselves and removing the sediments from the intake opening, causing the ones entering the intake to be reduced. Among other benefits of these plates are their low cost and easy structure, which has converted the method to one of the top ones in different uses. In the current study, it has been tried the effect of variables such as the angle and rate of the plate distance by building an experiment model (〖180〗^°) to be investigated by a twisted radius of 3 and the intake location of 〖115〗^° with an intake angle of 〖45〗^° under various hydraulic conditions. The rate of the sediment entered into the intake increases with the rising dewatering debit rate, also regarding the best placement angle of plates, the angle of 〖15〗^° used to install the plates has a higher reduction rate of the sediment entered to the intake due to not avoiding passing the flow lines forward the intake and hitting less with them relative to other angles; also, the least sediment entered to the intake was observed in the distance rate of 0.2 (the rate of the transverse distance to the longitudinal distance of plates) due to the eddies producing, it can have the larger reduction ratio. | ||
| کلیدواژهها | ||
| Submerged plates؛ Sediments؛ Intake Rate؛ Intake Channel | ||
| مراجع | ||
|
Abbasi, A. A., & Habibi, M. (2008). Laboratory study of the effect of intake angle on the control of sediment entering the intake in the presence of submerged plates. In Proceedings of the 8th International Seminar on River Engineering. Shahid Chamran University.
Abdel Azim, M., & Fahmy Salah, A. (2010). Physical modeling: Investigation of performance of sediment vanes at intakes. Hydraulics Research Institute, Delta Barrages.
Abul Qasimi, M. (2015). Laboratory investigation of the control of sediment entering the lateral catchment in meander [Doctoral dissertation, Tarbiat Modares University].
Aminian, P., Ahmadi, A., & Emamgholizadeh, S. (2019). Experimental investigation on the deviated sediment and flow to sediment bypass tunnels (SBTs) using submerged plates. Journal of Hydraulic Structures, 5(2), 18–31.
Barkdoll, B. D., Ettema, R., & Odgaard, J. (1999). Sediment control at lateral diversion: Limits and enhancements to vane use. Journal of Hydraulic Engineering, 125(8), 862–870.
Barkdoll, B. D., Hagen, B. L., & Odgaard, J. (1995). Sediment exclusion at hydropower intakes using submerged vanes. In Proceedings of the Waterpower Conference (pp. 368–377).
Emamgholizadeh, S., Borojeni, H. S., & Bina, M. (2005). The flushing of the sediments near the power intakes in the Dez reservoir. WIT Transactions on Ecology and the Environment, 83.
Emamgholizadeh, S., & Torabi, H. (2008). Experimental investigation of the effects of submerged vanes for sediment diversion in the Veis (Ahwaz) Pump Station. Journal of Applied Sciences, 8(13), 2396–2403.
Gohri, S., Ayubzadeh, S. A., Qodsian, M., & Salehi Nishabouri, S. A. A. (2009). Sediment control in water intakes using submersible plates. In Proceedings of the 8th International Seminar on River Engineering. Shahid Chamran University.
Hasanpour, F. (2005). Investigating the performance of lateral catchment in the presence of submerged composite plates and sills [Doctoral dissertation, Tarbiat Modares University].
Imam, A. (1996). Investigating the effect of the arrangement of submerged plates on the behavior of rivers [Master’s thesis, University of Tehran].
Michell, F., Ettema, R., & Muste, M. (2006). Case study: Sediment control at water intake for large thermal-power station on a small river. Journal of Hydraulic Engineering, 132(5), 440–449.
Nazari, S., & Shafa’i Bejestan, M. (1998). Laboratory investigation of the influence of the angle of deviation and water table height of catchments in river arches on the amount of sediments [Master’s thesis, Shahid Chamran University of Ahvaz].
Sajdi, M., & Habibi, M. (2002). Laboratory investigation of the use of submerged plates and breakwaters in increasing the water intake efficiency. In Proceedings of the 4th Iran Hydraulic Conference. Shiraz University.
Sajdi, M., & Habibi, M. (2007). The use of submerged plates in preventing sediment from entering aquifers. In Proceedings of the Third National Conference on Erosion and Sedimentation.
Wang, Y., Odgaard, J., Melville, B. W., & Jain, S. C. (1996). Sediment control at water intakes. Journal of Hydraulic Engineering, 122(6), 353–356.
Yonesi, H., Omid, M., & Sajdi Ex, M. (2008). The effect of the longitudinal arrangement of submerged plates on the change of riverbed morphology in the vicinity of gravity catchments. In Proceedings of the 6th International Seminar on River Engineering. Shahid Chamran University of Ahvaz. | ||
|
آمار تعداد مشاهده مقاله: 87 تعداد دریافت فایل اصل مقاله: 47 |
||