Reducing Drilling Cost in Geothermal Wells by Drilling Technology Optimization | ||
| Journal of Mining and Environment | ||
| مقاله 1، دوره 16، شماره 3، مرداد و شهریور 2025، صفحه 767-788 اصل مقاله (9.13 M) | ||
| نوع مقاله: Case Study | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2025.14206.2647 | ||
| نویسندگان | ||
| Mohamed Y Amer* 1؛ Adel M Salem2؛ Mohammed S Farahat3؛ Said Kamel Elsayed4 | ||
| 1Egyptian Drilling Company (EDC), Egypt | ||
| 2Faculty of Petroleum and Mining Engineering, Suez University, Egypt | ||
| 3Faculty of Petroleum and Mining Engineering, Suez University | ||
| 4Petroleum Engineering Dept., Faculty of Engineering and Technology, Future University in Egypt (FUE), Cairo 11835, Egypt | ||
| چکیده | ||
| Sustainable production of sufficient energy to power the world’s economy with a minimum environmental footprint has been one of the most significant challenges for the decades. Geothermal energy has been considered as one of the promising options to meet the world’s future energy demand. The cost of drilling geothermal wells is between 35% and 50% of the total investment cost for the new high-temperature geothermal plants. This “up front” cost makes the geothermal plants more expensive to build than the conventional plants, and because of this and the perceived risk, a lot of attention has been focused on reducing this cost. This paper attempts to minimize the cost of drilling deep wells such as AG-119X, in Egypt of 20060 ft. in depths; in this well, the actual cost was more than the proposed by about five million USD. The actual cost of the drilling operation has been analyzed and compared with the proposed; by observing the cost of each drilling item, it was found that the power drive tools in the bottom hole assembly such as the downhole motor with Rotary Steerable drilling system (RSS) or turbodrill hydraulic downhole motor is the most costly element of the drilling operation in 8.5 holes, which tack thirteen trips in every trip with a new bit, and it was found that the turbodrill hydraulic downhole motor was costly effected in drilling the shush section, in this, and can save around 1756999 USD; this paper is a road map for reducing the cost of drilling geothermal wells. | ||
| کلیدواژهها | ||
| Cost of Geothermal Drilling؛ Drilling technology؛ Turbodrill in Geothermal Well | ||
| مراجع | ||
|
[1]. Islam, M. T., Nabi, M. N., Arefin, M. A., Mostakim, K., Rashid, F., Hassan, N. M. S., & Muyeen, S. M. (2022). Trends and prospects of geothermal energy as an alternative source of power: A comprehensive review. Heliyon, 8(12),
[2]. Saleh, F., Teodoriu, C., Salehi, S., & Ezeakacha, C. (2020, February). Geothermal drilling: A review of drilling challenges with mud design and lost circulation problem. In Proceedings of 45th Annual Stanford Geothermal Workshop, Stanford University, Stanford, CA.
[3]. Shah, M., Yadav, K., & Sircar, A. (2024). Shallow and Deep Geothermal water sources identification in Unai Geothermal Field, Gujarat, India with Applications of Magnetotelluric (MT). Unconventional Resources, 100086.
[4]. Azhar, M., Zaidi, A. A., Naseer, M. N., Noorollahi, Y., & Uzair, M. (2022). Historical overview of geothermal energy. In Utilization of Thermal Potential of Abandoned Wells (pp. 3-10). Academic Press.
[5]. Teigland, A., Sangesland, S., Dale, S., & Brechan, B. (2022). An Experimental Study of the Wear Characteristics of Tubulars Made from Corrosion-Resistant Alloys. SPE Drilling & Completion, 37(02), 118-125.
[6]. Carrillo, G., Farid, U., Albrecht, M., Cook, P., Feroze, N., & Nevlud, K. (2009, March). Innovative Solution for Drilling Pre-Khuff Formations in Saudi Arabia Utilizing Turbodrill and Impregnated Bits. In SPE Middle East Oil and Gas Show and Conference (pp. SPE-120367). SPE.
[7]. Purba, D., Adityatama, D. W., Agustino, V., Fininda, F., Alamsyah, D., & Muhammad, F. (2020, February). Geothermal drilling cost optimization in Indonesia: a discussion of various factors. In Proceedings, 45th Workshop on Geothermal Reservoir Engineering, February 10 (Vol. 12, No. 2020, pp. 1-14).
[8]. Ma, T., Chen, P., & Zhao, J. (2016). Overview on vertical and directional drilling technologies for the exploration and exploitation of deep petroleum resources. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2, 365-395.
[9]. Naganawa, S., Tsuchiya, N., Okabe, T., Kajiwara, T., Shimada, K., & Yanagisawa, N. (2017, February). Innovative drilling technology for supercritical geothermal resources development. In Proceedings..
[10]. Adityatama, D. W., Purba, D., Muhammad, F., Agustino, V., Wiharlan, H., & Pasmeputra, K. K. (2020). Slimhole Drilling Overview for Geothermal Exploration in Indonesia: Potential and Challenges. In Proceedings, 45th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California (pp. 1-13).
[11]. https://www.slb.com
[12]. Gaynor, T. M. (1988). Downhole control of deviation with steerable straight-hole turbodrills. SPE drilling engineering, 3(01), 50-56.
[13]. Zhang, C., Zou, W., & Cheng, N. (2016, August). Overview of rotary steerable system and its control methods. In 2016 IEEE international conference on mechatronics and automation (pp. 1559-1565). IEEE.
[14]. Lukawski, M. Z., Silverman, R. L., & Tester, J. W. (2016). Uncertainty analysis of geothermal well drilling and completion costs. Geothermics, 64, 382-391.
[15]. Lukawski, M. Z., Anderson, B. J., Augustine, C., Capuano Jr, L. E., Beckers, K. F., Livesay, B., & Tester, J. W. (2014). Cost analysis of oil, gas, and geothermal well drilling. Journal of Petroleum Science and Engineering, 118, 1-14.
[16]. Khamis, Y. E., El-Rammah, S. G., & Salem, A. M. (2023). Rate of penetration prediction in drilling operation in oil and gas wells by k-nearest neighbors and multi-layer perceptron algorithms. Journal of Mining and Environment, 14(3), 755-770.
[17]. Tester, J. W., & Herzog, H. J. (1990). Economic predictions for heat mining: a review and analysis of hot dry rock (HDR) geothermal energy technology.
[18]. Olasolo, P., Juárez, M. C., Morales, M. P., & Liarte, I. A. (2016). Enhanced geothermal systems (EGS): A review. Renewable and Sustainable Energy Reviews, 56, 133-144.
[19]. Egyption General Petroleum Corporation (Khalda Petroleum Company) .
[20]. Parhizi, S., Lotfi, H., Khodaei, A., & Bahramirad, S. (2015). State of the art in research on microgrids: A review. IEEE access, 3, 890-925.
[21]. Augustine, C., Tester, J. W., Anderson, B., Petty, S., & Livesay, B. (2006, January). A comparison of geothermal with oil and gas well drilling costs. In Proceedings of the 31st Workshop on Geothermal Reservoir Engineering (pp. 5-19). New York, New York: Curran Associates Inc.
[22]. Elmasry, A., Abdel Zaher, M., Madani, A., & Nassar, T. (2022). Exploration of geothermal resources utilizing geophysical and borehole data in the Abu Gharadig basin of Egypt’s Northern Western desert. Pure and Applied Geophysics, 179(12), 4503-4520.
[23]. Lashin, A. (2020). Review of the geothermal resources of Egypt: 2015–2020. In Proceedings world geothermal congress.
[24]. Vollmar, D., Wittig, V., & Bracke, R. J. I. G. A. H. (2013). Geothermal Drilling Best Practices: The Geothermal translation of conventional drilling recommendations-main potential challenges. International Geothermal Association: Home.
[25]. Mokaramian, A., Rasouli, V., & Cavanough, G. (2015). Turbodrill design and performance analysis. Journal of Applied Fluid Mechanics, 8(3), 377-390.
[26]. Soldo, E., & Alimonti, C. (2015, April). From an oilfield to a geothermal one: use of a selection matrix to choose between two extraction technologies. In Proceedings World Geothermal Congress (Vol. 2015). | ||
|
آمار تعداد مشاهده مقاله: 473 تعداد دریافت فایل اصل مقاله: 345 |
||