Investigation of the Relationship Between Texture Coefficient and Abrasivity Properties of Granite Building Stones | ||
| Journal of Mining and Environment | ||
| مقاله 14، دوره 17، شماره 1، فروردین و اردیبهشت 2026، صفحه 283-293 اصل مقاله (3.1 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2025.15208.2912 | ||
| نویسندگان | ||
| Ali Rezaei1؛ Ebrahim Ghasemi* 1؛ Ali Farhadian2؛ Sina Ghavami1 | ||
| 1Department of Mining Eng., Isfahan University of Technology, Isfahan, Iran | ||
| 2Mining Group, Faculty of Eng., University of Jiroft, Kerman, Iran | ||
| چکیده | ||
| In this study, a comprehensive investigation has been done on 10 different types of granite building stones from various mines in Iran. The study aims to investigate the relationship between the texture coefficient (TC) and abrasivity properties of the studied stones. Abrasivity of stones was quantified through six indices, including equivalent quartz content (EQC), rock abrasivity index (RAI), Schimazek abrasivity factor (F), Cerchar abrasivity index (CAI), building stone abrasivity index (BSAI), and the Taber wear index (Iw). Bi-variate regression analysis was applied to develop the predictive equations for relationship between TC and abrasivity indices. The investigations demonstrated that there is a direct relationship between TC and all abrasivity indices. Furthermore, TC has moderate to high relationship with abrasivity indices. After developing the equations, their accuracy was evaluated by performance criteria including determination coefficient (R2), the normalized root mean square error (NRMSE), the variance account for (VAF), and the performance index (PI). The strongest relationship was found between TC and RAI (with R2, VAF, NRMSE, and PI value of 0.850, 0.074, 85.386, and 1.630, respectively), while the weakest relationship was observed between TC and F (with R2, NRMSE, VAF, and PI value of 0.491, 0.532, 47.605, and 0.435, respectively). This research demonstrates importance of the textural characteristics of stones, especially TC as a reliable index, on the abrasivity properties of granite building stones. Thus, the equations developed herein can be practically used for estimating the stone abrasivity in building stone quarrying and processing projects. | ||
| کلیدواژهها | ||
| Granite building stones؛ Abrasivity؛ Texture coefficient (TC)؛ Regression analysis | ||
| مراجع | ||
|
[1]. Farhadian, A., Ghasemi, E., Hoseinie, S.H., & Bagherpour, R. (2021). Development of a new test method for evaluating the abrasivity of granite building stones during polishing process based on weight loss of abrasive tool. Construction and Building Materials, 303, 124497.
[2]. Rezaei, M., & Nyazyan, N. (2023). Assessment of the effect of rock properties on horizontal drilling rate in marble quarry mining: field and experimental studies. Journal of Mining and Environment, 14(1), 321-339.
[3]. Rezaei, M., & Esmaeili, K. (2024). The Anisotropy of Rock Drilling in Marble Quarry Mining Based on the Relationship between Vertical and Horizontal Drilling Rates. International Journal of Geomechanics, 24(10), 04024236.
[4]. Ozcelik, Y., Polat, E., Bayram, F., & Ay, A.M. (2004). Investigation of the effects of textural properties on marble cutting with diamond wire. International Journal of Rock Mechanics and Mining Sciences, 41, 228-234.
[5]. Ersoy, A., & Waller, M. (1995). Textural characterisation of rocks. Engineering geology, 39(3-4), 123-136.
[6]. Williams, H., Turner, F.J., & Gilbert, C.M. (1982). Petrography: an introduction to the study of rocks in thin sections. W. H. Freeman and Company, San Francisco, Calif.
[7]. Askaripour, M., Saeidi, A., Mercier-Langevin, P., & Rouleau, A. (2022). A review of relationship between texture characteristic and mechanical properties of rock. Geotechnics, 2(1), 262-296.
[8]. Petruk, W. (1986). Image analysis: an overview of developments, CANMET Report 86-4E. Canada Centre for Mineral and Energy Technology, Ottawa, Canada.
[9]. Přikryl, R. (2006). Assessment of rock geomechanical quality by quantitative rock fabric coefficients: limitations and possible source of misinterpretations. Engineering Geology, 87(3-4), 149-162.
[10]. Howarth, D., & Rowlands, J. (1987). Quantitative assessment of rock texture and correlation with drillability and strength properties. Rock Mechanics and Rock Engineering, 20(1), 57-85.
[11]. Dreyer, W. (1973). The science of rock mechanichs, Part 1: The strength properties of rocks. Trans Tech Publications, Cleveland, OH, USA.
[12]. Esmailzadeh, A., Behnam, S., Mikaeil, R., Naghadehi, M.Z., & Saei S. (2017). Relationship between texture and uniaxial compressive strength of rocks. Civil Engineering Journal, 3(7), 480-486.
[13]. Tumac, D., Copur, H., Balci, C., Er, S., & Avunduk, E. (2018). Investigation into the effects of textural properties on cuttability performance of a chisel tool. Rock Mechanics and Rock Engineering, 51, 1227-1248.
[14]. Azzoni, A., Bailo, F., Rondena, E., & Zaninetti, A. (1996). Assessment of texture coefficient for different rock types and correlation with uniaxial compressive strength and rock weathering. Rock Mechanics and Rock Engineering, 29(1), 39-46.
[15]. Ozturk, C., Nasuf, E., & Bilgin, N. (2004). The assessment of rock cutability, and physical and mechanical rock properties from a texture coefficient. Journal of The Southern African Institute of Mining and Metallurgy, 104(7), 397-402.
[16]. Alber, M., & Kahraman, S.A. (2009). Predicting the uniaxial compressive strength and elastic modulus of a fault breccia from texture coefficient. Rock Mechanics and Rock Engineering, 42(1), 117.
[17]. Ghaysari, N., Ataei, M., Sereshki, F., & Mikaiel, R. (2012). Prediction of performance of diamond wire saw with respect to texture characteristics of rock. Archives of Mining Sciences, 57(4), 887-900.
[18]. Tandon, R.S., & Gupta, V. (2013). The control of mineral constituents and textural characteristics on the petrophysical & mechanical (PM) properties of different rocks of the Himalaya. Engineering Geology, 153, 125-143.
[19]. Ozturk, C.A., & Nasuf, E. (2013). Strength classification of rock material based on textural properties. Tunnelling and Underground Space Technology, 37, 45-54.
[20]. Ozcelik, Y., Bayram, F., & Yasitli, N.E. (2013). Prediction of engineering properties of rocks from microscopic data. Arabian Journal of Geosciences, 6, 3651-3668.
[21]. Ozturk, C.A., Nasuf, E., & Kahraman, S.A. (2014). Estimation of rock strength from quantitative assessment of rock texture. Journal of the Southern African Institute of Mining and Metallurgy, 114(6), 471-480.
[22]. He, J., Li, S., Li, X., Wang, X., & Guo, J. (2016). Study on the correlations between abrasiveness and mechanical properties of rocks combining with the microstructure characteristic. Rock Mechanics and Rock Engineering, 49, 2945-2951.
[23]. Ajalloeian, R., Mansouri, H., & Baradaran, E. (2017). Some carbonate rock texture effects on mechanical behavior, based on Koohrang tunnel data, Iran. Bulletin of Engineering Geology and the Environment, 76, 295-307.
[24]. Dormishi, A., Ataei, M., Mikaeil, R., & Kakaei, R.K. (2018). Relations between texture coefficient and energy consumption of gang saws in carbonate rock cutting process. Civil Engineering Journal, 4(2), 413-421.
[25]. Kamani, M., & Ajalloeian, R. (2019). Evaluation of engineering properties of some carbonate rocks trough corrected texture coefficient. Geotechnical and Geological Engineering, 37, 599-614.
[26]. Rostami, K., Hamidi, J.K., & Nejati, H.R. (2020). Use of rock microscale properties for introducing a cuttability index in rock cutting with a chisel pick. Arabian Journal of Geosciences, 13(18), 960.
[27]. Diamantis, K., Fereidooni, D., Khajevand, R., & Migiros, G. (2021). Effect of textural characteristics on engineering properties of some sedimentary rocks. Journal of Central South University, 28, 926-938.
[28]. Ghorbani, S., Hoseinie, S.H., Ghasemi, E., & Sherizadeh, T. (2023). Effect of quantitative textural specifications on Vickers hardness of limestones. Bulletin of Engineering Geology and the Environment, 82(1), 32.
[29]. Tiryaki, B., & Dikmen, A.C. (2006). Effects of rock properties on specific cutting energy in linear cutting of sandstones by picks. Rock Mechanics and Rock Engineering, 39(2), 89–120.
[30]. Ajalloeian, R., & Kamani, M. (2019). An investigation of the relationship between Los Angeles abrasion loss and rock texture for carbonate aggregates. Bulletin of Engineering Geology and the Environment, 78, 1555-1563.
[31]. Atici, U., & Comakli, R. (2019). Evaluation of the physico-mechanical properties of plutonic rocks based on texture coefficient. Journal of the Southern African Institute of Mining and Metallurgy, 119(1), 63-69.
[32]. Hosseini, S.M., Ataei, M., Esmaeilzadeh, A., Faradonbeh, R.S., Azghan, R.A., Haghdadi, A. & Asl, M.M. (2022). Investigation of the Relationship Between Texture Coefficient and Electrical Current Consumption of the Cutting Machine with Different Lubricants and Cooling Fluids. Journal of Computational and Cognitive Engineering, 5(2), 59-66.
[33]. Fereidooni, D., & Sousa, L. (2022). Predicting the engineering properties of rocks from textural characteristics using some soft computing approaches. Materials, 15(22), 7922.
[34]. Plinninger, R.J., & Restner, U. (2008). Abrasiveness testing, quo vadis?–a commented overview of abrasiveness testing methods. Geomechanik und Tunnelbau, 1(1), 61-70.
[35]. Majeed, Y., & Abu Bakar, M.Z. (2016). Statistical evaluation of CERCHAR Abrasivity Index (CAI) measurement methods and dependence on petrographic and mechanical properties of selected rocks of Pakistan. Bulletin of Engineering Geology and the Environment, 75, 1341-1360.
[36]. Labaš, M., Krepelka, F., & Ivaničová, L. (2012). Assessment of abrasiveness for research of rock cutting. Acta Montanistica Slovaca, 17(1), 65.
[37]. Zhang, G., Thuro, K., Song, Z., Dang, W., & Bai, Q. (2025). Cerchar abrasivity test and its applications in rock engineering: A review. International Journal of Coal Science and Technology, 12(1), 13.
[38]. Mucha, K. (2023). Application of rock abrasiveness and rock abrasivity test methods—A review. Sustainability, 15(14), 11243.
[39]. Thuro, K. (1997). Drillability prediction: geological influences in hard rock drill and blast tunnelling. Geologische Rundschau, 86, 426-438.
[40]. Plinninger, R.J., Spaun, G., & Thuro, K. (2002). Prediction and classification of tool wear in drill and blast tunnelling. In: Proceedings of 9th congress of the International Association for Engineering Geology and the Environment, Durban, South Africa: 2226-2236.
[41]. Schimazek, J., & Knatz, H. (1970). The influence of rock structure on the cutting speed and pick wear of heading machines. Gluckauf, 106, 274-278.
[42]. ASTM D 7625 (2010). Standard test method for laboratory determination of abrasiveness of rock using the Cerchar method. ASTM International: West Conshohocken, PA, USA.
[43]. ASTM C 1353 (2002). Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic. ASTM International: West Conshohocken, PA, USA.
[44]. Sun, W., Wang, L. & Wang, Y. (2017). Mechanical properties of rock materials with related to mineralogical characteristics and grain size through experimental investigation: a comprehensive review. Frontiers of Structural and Civil Engineering, 11, 322-328.
[45]. Johnson, S.T., & Fowell, R.J. (1986). Compressive strength is not enough (assessing pick wear rates for drag tool equipped machines). In ARMA US Rock Mechanics/Geomechanics Symposium.
[46]. Jager, W. (1988). An investigation into the abrasive capacity of rocks. Memoirs of the Centre of Engineering Geology in the Netherlands, Delft University of Technology.
[47]. Amirkiyaei, V., Ghasemi, E., & Faramarzi, L. (2021). Estimating uniaxial compressive strength of carbonate building stones based on some intact stone properties after deterioration by freeze–thaw. Environmental Earth Sciences, 80(9), 352.
[48]. Farhadian, A., Ghasemi, E., Hoseinie, S.H., & Bagherpour, R. (2022). Prediction of rock abrasivity index (RAI) and uniaxial compressive strength (UCS) of granite building stones using nondestructive tests. Geotechnical and Geological Engineering, 40(6), 3343-3356.
[49]. Yagiz, S., Sezer, E.A., & Gokceoglu, C. (2012). Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks. International Journal for Numerical and Analytical Methods in Geomechanics, 36(14), 1636-1650. | ||
|
آمار تعداد مشاهده مقاله: 421 تعداد دریافت فایل اصل مقاله: 129 |
||