Investigating the Recycling of Andesite Waste from Quarry Mines in the Production of Artificial Stone: An Analysis of Environmental, physical-mechanical and Economic Issues | ||
| Journal of Mining and Environment | ||
| مقاله 13، دوره 17، شماره 2، خرداد و تیر 2026، صفحه 619-634 اصل مقاله (1.09 M) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22044/jme.2025.15523.2974 | ||
| نویسندگان | ||
| farhad samimi namin* ؛ Zahra S Tarasi؛ Keyvan Habibi kilak | ||
| Department of Mining Engineering, Engineering Faculty, University of Zanjan, Zanjan, Iran | ||
| چکیده | ||
| Environmental issues related to mine wastes have highlighted the importance of waste recycling. A study was conducted on sand mines in Kurdistan province, Iran, focusing on the construction of artificial stones from effluent to minimize environmental impact. The research included environmental, physical-mechanical, and economic analyses, using the Analytic Hierarchy Process (AHP) for environmental assessments. Tests on density, water absorption, and strength showed that stones containing effluents were superior to other products. Increasing effluent percentages did not significantly affect density but improved water absorption and strength. Artificial stones containing 40% effluent demonstrated the greatest resistance and the least water absorption. This formulation achieves compressive strengths of 36.07 MPa, flexural strengths of 15.09 MPa, and tensile strengths of 1.89 MPa. Furthermore, it possesses a dry density of 2.33 gr/cm³, and a water absorption rate of 3.82%. Additionally, stones with effluent demonstrated better resistance to corrosion acid. The research methodology employed in the environmental analysis involved the application of the Analytic Hierarchy Process (AHP). Findings from environmental studies indicated that the volume of waste emerged as the most significant criterion with 27.3% weight when evaluating the selection of construction products that are environmentally compatible. Furthermore, research in environmental studies indicates that artificial stone is at least 10% more preferred than natural stone, 48% more preferred than tile, and 63% more preferred than brick. The analysis within the economic section demonstrated that the production of artificial stone incorporating waste, which achieved an internal rate of return of 138%, was more cost-effective than comparable products. | ||
| کلیدواژهها | ||
| Artificial stone؛ Environmental analysis؛ Rock mechanical analysis؛ Waste Recycling؛ Quarry mine | ||
| مراجع | ||
|
[1]. Sahu, N., Sahu, V., Dhruw, M., Paikra, K., Garg, A. K., & Panda, S. (2024). Review on Advancements in the Production of Artificial Aggregates from Industrial Byproducts: A Sustainable Solution for Infrastructure Development. International Journal of Scientific Research in Engineering & Technology, 4(2), 102-105.
[2]. Ribeiro, C. E. G., Rodriguez, R. J. S., & de Carvalho, E. A. (2017). Microstructure and mechanical properties of artificial marble. Construction and Building Materials, 149, 149-155.
[3]. Slim, J. A. & Wakefield, R. W. (1991). The utilisation of sewage sludge in the manufacture of clay bricks. Water Sa, 17(3), 197-202.
[4]. Galetakis, M., & Raka, S. (2004). Utilization of limestone dust for artificial stone production: an experimental approach. Minerals Engineering, 17(2), 355-357.
[5]. Papayianni, I., Stefanidou, M., & Pachta, V. (2008). Design and application of artificial stone compatible to the existing old one in the archeological site of Pella. In Proceedings of the 11th international congress on deterioration and conservation of stone, Torun: Nicolaus Copernicus University Press, 1, 709-716.
[6]. Lee, M. Y., Ko, C. H., Chang, F. C., Lo, S. L., Lin, J. D., Shan, M. Y., & Lee, J. C. (2008). Artificial stone slab production using waste glass, stone fragments and vacuum vibratory compaction. Cement and Concrete Composites, 30(7), 583-587.
[7]. Alzboon, K. K., & Mahasneh, K. N. (2009). Effect of using stone cutting waste on the compression strength and slump characteristics of concrete. International Journal of Environmental Science and Engineering, 1(4), 167-172.
[8]. Mahzuz, H. M. A., Ahmed, A. A. M., & Yusuf, M. A. (2011). Use of stone powder in concrete and mortar as an alternative of sand. African Journal of Environmental Science and Technology, 5(5), 381-388.
[9]. Stefanidou, M., Pachta, V., & Papayianni, I. (2015). Design and testing of artificial stone for the restoration of stone elements in monuments and historic buildings. Construction and building materials, 93, 957-965.
[10]. Barani, K., & Esmaili, H. (2016). Production of artificial stone slabs using waste granite and marble stone sludge samples. Journal of Mining & Environment, 7(1), 135-141.
[11]. da Cunha Demartini, T. J., Rodríguez, R. J. S., & Silva, F. S. (2018). Physical and mechanical evaluation of artificial marble produced with dolomitic marble residue processed by diamond-plated bladed gang-saws. Journal of Materials Research and Technology, 7(3), 308-313.
[12]. Peng, L., & Qin, S. (2018). Mechanical behaviour and microstructure of an artificial stone slab prepared using a SiO2 waste crucible and quartz sand. Construction and Building Materials, 171, 273-280.
[13]. Carvalho, E. A. S., Vilela, N. D. F., Monteiro, S. N., Vieira, C. M. F., & Silva, L. C. D. (2018). Novel artificial ornamental stone developed with quarry waste in epoxy composite. Materials Research, 21, e20171104.
[14]. Amaral, L. F., de Carvalho, J. P. R. G., da Silva, B. M., Delaqua, G. C. G., Monteiro, S. N., & Vieira, C. M. F. (2019). Development of ceramic paver with ornamental rock waste. Journal of Materials Research and Technology, 8(1), 599-608.
[15]. Gomes, M. L. P., Carvalho, E. A., Sobrinho, L. N., Monteiro, S. N., Rodriguez, R. J., & Fontes Vieira, C. M. (2019). Physical and mechanical properties of artificial stone produced with granite waste and vegetable polyurethane. In Green Materials Engineering: An EPD Symposium in Honor of Sergio Monteiro, Springer International Publishing, 23-29.
[16]. Shishegaran, A., Saeedi, M., Mirvalad, S., & Korayem, A. H. (2021). The mechanical strength of the artificial stones, containing the travertine wastes and sand. Journal of Materials Research and Technology, 11, 1688-1709.
[17]. Beulah, M., Sudhir, M. R., Mohan, M. K., Gayathri, G., & Jain, D. (2021). Mine Waste‐Based Next Generation Bricks: A Case Study of Iron Ore Tailings, Red Mudand GGBS Utilization in Bricks. Advances in Materials Science and Engineering, 2021(1), 9499613.
[18]. de Aguiar, M. C., Fernandes, M. C. S., Sant’Ana, M. A. K., Della Sagrillo, V. P., dos Santos Anastácio, A., & Gadioli, M. C. B. (2023). Eco-Efficient Artificial Stones Produced Using Quartzite Quarry Waste and Vegetable Resin. Sustainability, 16(1), 1-18.
[19]. Silva, T. L. D. C., Carvalho, E. A. S., Barreto, G. N. S., da Silva, T. B. P., da Cunha Demartini, T. J., & Vieira, C. M. F. (2023). Characterization of artificial stone developed with granite waste and glass waste in epoxy matrix. journal of materials research and technology, 26, 2528-2538.
[20]. Srinivasan, D., Ramachandran, S., Kannadasan, K., Muthukaruppan, A., & Ismail, A. A. M. (2024). Production of engineered stone from waste foundry sand using epoxy-phenalkamine binder. Construction and Building Materials, 419, 135464.
[21]. Chavarry-Vallejos CM, Gutiérrez AA, Bancayán C, Oré LJ, Rodríguez JS, Andrés Í, Hora D, Salardi EP, Serrano JE. (2023). Use Of Mining Tailings in The Manufacture of Ecological Bricks to Encourage the Construction of Sustainable Housing. International Journal. 10(3), 2555-67.
[22]. Akeed, M. H. (2022). Mine tailings-based geopolymers: Physical and mechanical properties. ESS Open Archive, DOI: 10.1002/essoar.10512048.1.
[23]. Ribeiro, L., Carvalho, E., Gomes, M. L., Borlini, M., Monteiro, S. N., & Fontes Vieira, C. M. (2019). Reuse of the Iron Ore Residue through the Production of Coating. In Green Materials Engineering: An EPD Symposium in Honor of Sergio Monteiro, Springer International Publishing, 249-255.
[24]. Carvalho, E. A., Magalhães, J. P., Rodriguez, R. J., Carvalho, E. A., Monteiro, S. N., & Fontes Vieira, C. M. (2019). Reuse of Quarry Waste in Artificial Stone Production with Using Vacuum, Compression, and Vibration. In Green Materials Engineering: An EPD Symposium in Honor of Sergio Monteiro, Springer International Publishing, 241-247.
[25]. Saaty, T. L. (1994). Fundamentals of decision making and priority theory with the analytic hierarchy process. RWS publications. Pittsburgh: ISBN 0-9620317-6-3. "A thorough exposition of the theoretical aspects of AH", 477 P. [26]. Saaty, Thomas L. Mathematical Principles of Decision Making (Principia Mathematica Decernendi) (2009). Pittsburgh: RWS. ISBN 1-888603-10-0. "Comprehensive coverage of the AHP, its successor the ANP, and further developments of their underlying concepts", 531 P.
[27]. Maheshwari, S. N., Maheshwari, S. K., & Maheshwari, S. K. (2024). Management Accounting and Financial Control. Sultan Chand & Sons, 397 P. | ||
|
آمار تعداد مشاهده مقاله: 468 تعداد دریافت فایل اصل مقاله: 37 |
||