[1]  Bhutta MMA, Hayat N, Bashir MH, Khan AR, Ahmad KN, Khan S (2012) CFD applications in various heat exchangers design: A review. Applied Thermal Engineering 32: 1-12.

[2]  Wojciech L, Zając D (2017) Modification of a recuperator construction with CFD methods Chemical and Process Engineering 38, no. 4: 567-576.

[3]  Chun-Hsiang Y, Yu MT, Chen CH, Chen CH (2007) Performance simulation and thermal stress analysis of ceramic recuperators formed by SiC and MAS. Numerical Heat Transfer, Part A: Applications 53, no. 7: 709-725.

[4]  Krzysztof W (2016) Simulation of deposit growth onto recuperator tubes in pit furnaces. Engineering Transactions 64, no. 4: 417-424.

[5]  Kayabasi, E, Erdogan S (2017) Design and simulation of recuperator for hot stoves. Int. J. Mech.Product. Eng. 5, no. 3: 15-20.

[6]  Marchionni M, Chai L, Bianchi G, Tassou SA (2019) Numerical modelling and transient analysis of a printed circuit heat exchanger used as recuperator for supercritical CO2 heat to power conversion systems. Applied Thermal Engineering 161: 114190.

[7]  Bowen TL, Guimond DP, Muench RK (1987) Experimental investigation of gas turbine recuperator fouling. J. engin. gas turbines and power 109, no. 3: 249-256.

[8]  Wedekind GL, Kobus CJ (2001) Optimal design of a thermal recuperator." Page 6: 1.

[9]  Mediokritskii EL, Gaponov VL, Loginov VE (1997) Study of heat transfer in recuperators by computer models." J. engin. Phy. Thermophy. 70, no. 1: 119-124.

[10] Ozden E, Tari I (2010) Shell side CFD analysis of a small shell-and-tube heat exchanger." Energy Conversion and Management 51, no. 5: 1004-1014.

[11] Raj V, Aroul A, Velraj R (2011) Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applications. Int. J. Therm. Sci. 50, no. 8: 1573-1582

[12] Ji J, Yuling S, Zhang C (2011) Hybrid numerical simulation of large-scale gas-fired tubular heat exchangers. HVAC&R Research 17, no. 1: 118-130.

[13] Jaemin K, Sibilli T, Ha MY, Kim K, Yoon SY (2019) Compound porous media model for simulation of flat top U-tube compact heat exchanger. Int. J. heat mass trans. 138: 1029-1041.

[14] Patankar A, Deshpande A, Sapali S (2016) Design and performance evaluation of a compact recuperator for a micro gas turbine. Energy Procedia, 90, 254-261.

[15] Jang J, Lee H, Kim D (2019) Multi-objective optimization of a plate-fin heat exchanger using particle swarm optimization." Applied Thermal Engineering, 150, 616-625.

[16] Gupta A, Roy S, Saha S (2017) CFD analysis of a gas turbine recuperator with varying operating conditions. J. Therm. Sci. Engin. Apps, 9(2), 021009.

[17] Lal P, Subbarao PMV (2020) Numerical investigation on the performance of a cross-flow heat exchanger with different fin geometries. Int. J. Heat Mass Trans., 152, 119567.

[18] Yang L, Liu W, Zhang H,  Wang Z (2018) Experimental study on heat transfer characteristics of a ceramic recuperator for high-temperature applications. Energy Conversion and Management, 171, 239-247.

[19] Shang K, Xu H, Zhao W (2019) Influence of material properties on the thermal performance of plate-fin recuperators. Applied Thermal Engineering, 152, 732-740.

[20] Zhang X, Wu X, Yuan J (2017) Design and analysis of a recuperator-integrated solar-driven combined power and cooling cycle. Energy, 135, 652-662.

[21] Ghanbarpour M, Toghraie D (2021) Optimization and simulation of a combined heat and power system with a recuperator for residential applications. Energy Reports, 7, 1895-1905.

[22] Xie Y, Xu H, Zhang Y (2018) Transient thermal modeling of a recuperator for waste heat recovery in steel production. Applied Thermal Engineering, 140, 475-484.

[23] Hussain T, Rasul MG, Khan MMK (2020) Artificial neural network-based prediction of the performance of a gas turbine recuperator." Energy, 197, 117276.

[24] Žukauskas A (1972) Heat transfer from tubes in crossflow.  Advances in heat transfer, vol. 8, pp. 93-160.

[25] Khan WA (2004) Modeling of Fluid Flow and Heat Transfer for Optimization of Pin-Fin Heat Sinks. Ph.D. Thesis, University of Waterloo, Canada.

[26] Petukhov BS, Popov VN (1963) Theoretical calculation of heat exchange an fictional resistance in turbulent flow in tubes of an incompressible fluid with variable physical properties, High Temp. (USSR) 1, 69–83.    

[27] Dittus FW, Boelter LMK (1930) Heat transfer in automobile radiators of the tubular
type, Univ. California Publ. Eng. 2: 443–461.

[28] Sieder EN, Tate GE (1936) Heat transfer and pressure drop of liquids in tubes, Ind.
Eng. Chem 28: 1429.

[29] Gnielinski V (1976) New equations for heat and mass transfer in turbulent pipe and
channel flow, Int. Chem. Eng. 16: 359–368.

[30] Filonenko GK (1954) Hydraulic resistance in pipes, Teploenergetika 1: 40–44.

[31] Marchionni M, Chai L, Bianchi G, Tassou SA (2019) Numerical modelling and transient analysis of a printed circuit heat exchanger used as recuperator for supercritical CO2 heat to power conversion systems. Applied Thermal Engineering 161: 114190.

[32] Ganapathy V (2014) Steam generators and waste heat boilers: for process and plant engineers. CRC Press.

[33] Ganapathy V (2003) Industrial Boilers and Heat Recovery Steam Generators. CRC Press.

[34] VDI heat atlas (2010) Springer, Berlin Heidelberg. https://doi. org/10 1007: 978-3.

[35] Kays WM, London AL (2018) Compact heat exchangers, 3rd ed. MEDTEH.

[36] Kuppan T (2000) Heat exchanger design handbook. CRC press.