[1] Jawad, M., (2023) Insinuation of Arrhenius Energy and Solar Radiation on Electrical Conducting Williamson Nano Fluids Flow with Swimming Microorganism: Completion of Buongiorno's Model. East European Journal of Physics, p. 135-145.

[2]  Sharma, B.K., et al., (2023) Entropy generation and thermal radiation analysis of EMHD Jeffrey nanofluid flow: Applications in solar energy. Nanomaterials. 13(3): p. 544.

[3]  Jeelani, M.B. and A. Abbas, (2023) Al2O3-Cu\Ethylene glycol-based magnetohydrodynamic non-Newtonian Maxwell hybrid nanofluid flow with suction effects in a porous space: energy saving by solar radiation. Symmetry. 15(9): p. 1794.

[4]  Ullah, M.I., et al., (2023) A fractional approach to solar heating model using extended ODE system. Alexandria Engineering Journal. 81: p. 405-418.

[5]  Jalili, B., et al., (2023) Squeezing flow of Casson fluid between two circular plates under the impact of solar radiation. ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik: p. e202200455.

[6]  Obalalu, A., et al., (2023) Two-Phase Numerical Simulation for the Heat and Mass Transfer Evaluation Across a Vertical Deformable Sheet with Significant Impact of Solar Radiation and Heat Source/Sink. Arabian Journal for Science and Engineering: p. 1-19.

[7]  Abbas, A., et al., (2023) Numerical simulation of variable density and magnetohydrodynamics effects on heat generating and dissipating Williamson Sakiadis flow in a porous space: Impact of solar radiation and Joule heating. Heliyon. 9(11).

[8]  Dawar, A., et al., (2023) MHD stagnation point flow of a water-based copper nanofluid past a flat plate with solar radiation effect. Journal of Petroleum Science and Engineering. 220: p. 111148.

[9]  Sharma, B.K., et al., (2023) Computational analysis of melting radiative heat transfer for solar Riga trough collectors of Jeffrey hybrid-nanofluid flow: a new stochastic approach. Case Studies in Thermal Engineering. 52: p. 103658.

[10] Hussain, S.M., et al., (2023) Chemical reaction and thermal characteristiecs of Maxwell nanofluid flow-through solar collector as a potential solar energy cooling application: A modified Buongiorno's model. Energy & Environment. 34(5): p. 1409-1432.

[11] Muto, Y., C. Kojima, and Y. Okura, (2023) Mathematical modeling of road heating system with underground distribution line based on nonlinear ODE model. Nonlinear Theory and Its Applications, IEICE. 14(2): p. 378-402.

[12] El-dawy, H., M.F. El-Amin, and Z.A. Raizah, (2023) Joule Heating and Viscous Dissipation Effects on a Stretching/Shrinking Cannel Filled by Micropolar Hybrid Nanofluid in Presence Thermal/Solar Radiation. Journal of Nanofluids. 12(3): p. 738-744.

[13] Jalili, P., et al., (2023) Study of nonlinear radiative heat transfer with magnetic field for non-Newtonian Casson fluid flow in a porous medium. Results in Physics. 48: p. 106371.

[14] Ho, C., C.-C. Chen, and W.-M. Yan, (2016) Experimental and numerical study on transient thermal energy storage of microencapsulated phase change material particles in an enclosure. Int. J. Heat Mass Transfer,. 94: p. 191-198.

[15] Ho, C., W.-L. Chou, and C.-M. Lai, (2016) Thermal and electrical performances of a water-surface floating PV integrated with double water-saturated MEPCM layers. Applied Thermal Engineering. 94: p. 122-132.

[16] Ho, C., et al., (2013) Performance assessment of a BIPV integrated with a layer of water-saturated MEPCM. Energy and buildings. 67: p. 322-333.

[17] Ho, C.-J., A. Tanuwijava, and C.-M. Lai, (2012)Thermal and electrical performance of a BIPV integrated with a microencapsulated phase change material layer. Energy and Buildings. 50: p. 331-338.

[18] Sharma, S., et al., (2016) Performance enhancement of a Building-Integrated Concentrating Photovoltaic system using phase change material. Solar Energy Materials and Solar Cells. 149: p. 29-39.

[19] Hasan, A., et al., (2015) Increased photovoltaic performance through temperature regulation by phase change materials: Materials comparison in different climates. Solar Energy. 115: p. 264-276.

[20] Maiti, S., et al., (2011) Self regulation of photovoltaic module temperature in V-trough using a metal–wax composite phase change matrix. Solar energy. 85(9): p. 1805-1816.

[21] Aelenei, L., et al., (2014) Building Integrated Photovoltaic System with integral thermal storage: a case study. Energy Procedia. 58: p. 172-178.

[22] Aelenei, L., et al., (2014) Thermal performance of a hybrid BIPV-PCM: modeling, design and experimental investigation. Energy Procedia. 48: p. 474-483.

[23] Park, J., T. Kim, and S.-B. Leigh, (2014) Application of a phase-change material to improve the electrical performance of vertical-building-added photovoltaics considering the annual weather conditions. Solar Energy. 105: p. 561-574.

[24] Brano, V.L., et al., (2014) Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: description and experimental validation. Renewable Energy. 68: p. 181-193.

[25] Biwole, P.H., P. Eclache, and F. Kuznik, (2013) Phase-change materials to improve solar panel's performance. Energy and Buildings, 2013. 62: p. 59-67.

[26] Hasan, A., et al., (2010) Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics. Solar Energy. 84(9): p. 1601-1612.

[27] Huang, M., P. Eames, and B. Norton, (2006) Comparison of a small-scale 3D PCM thermal control model with a validated 2D PCM thermal control model. Solar energy materials and solar cells, 2006. 90(13): p. 1961-1972.

[28] Huang, M., P. Eames, and B. Norton, (2006) Phase change materials for limiting temperature rise in building integrated photovoltaics. Solar energy. 80(9): p. 1121-1130.

[29] Huang, M., P. Eames, and B. Norton, (2004) Thermal regulation of building-integrated photovoltaics using phase change materials. International Journal of heat and mass transfer. 47(12-13): p. 2715-2733.

[30] Hausler, T. and H. Rogaß. (2020) Latent heat storage on photovoltaics. in Sixteenth European Photovoltaic Solar Energy Conference. Routledge.

[31] Häusler, T. and H. Rogaß. (1998) Photovoltaic module with latent heat-storage-collector. in 2nd World Conference on Photovoltaic Solar Energy Conversion, proceedings of the international conference held at Vienna, Austria, 6-10 July, vol. 1. 1998. Office for Official Publications of the European Communities.

[32] Ma, T., et al., (2015) Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook. Renewable and Sustainable Energy Reviews. 43: p. 1273-1284.

[33] Radziemska, E., (2003) The effect of temperature on the power drop in crystalline silicon solar cells. Renewable energy. 28(1): p. 1-12.

[34] Krauter, S. and R. Hanitsch. (1994) Actual optical and thermal performance of photovoltaic modules. in IEEE 24 th Photovoltaic Specialist Conference..

[35] Weakliem, H. and D. Redfield, (1979)Temperature dependence of the optical properties of silicon. Journal of Applied Physics. 50(3): p. 1491-1493.

[36] EIA, U., (2017) US electric generating capacity increase in 2016 was largest net change since 2011. Today in Energy. 27.

[37] Shamsundar, N. and E. Sparrow, (1975) Analysis of multidimensional conduction phase change via the enthalpy model. 1975.

 

[38] Farooq, U., et al., (2018) Transpiration and viscous dissipation effects on entropy generation in hybrid nanofluid flow over a nonlinear radially stretching disk. Entropy. 20(9): p. 668.

[39] Jalili, P., et al., (2022) Heat transfer analysis in cylindrical polar system with magnetic field: a novel hybrid analytical and numerical technique. Case Studies in Thermal Engineering. 40: p. 102524.

[40] Jalili, B., et al., (2023) Analytical approach for micropolar fluid flow in a channel with porous walls. Alexandria Engineering Journal. 79: p. 196-226.

[41] Jalili, P., et al., (2023) A novel technique for solving unsteady three-dimensional brownian motion of a thin film nanofluid flow over a rotating surface. Scientific Reports, 2023. 13(1): p. 13241.

[42] Azar, E.A., et al., (2023) An exact analytical solution of the Emden–Chandrasekhar equation for self-gravitating isothermal gas spheres in the theory of stellar structures. Physics of the Dark Universe. 42: p. 101309.

[43] Jalili, B., et al., (2023) impact of variable viscosity on asymmetric fluid flow through the expanding/contracting porous channel: A thermal analysis. Case Studies in Thermal Engineering. 52: p. 103672.

[44] Jalili, B., et al., (2024) A novel approach to micropolar fluid flow between a non-porous disk and a porous disk with slip. Chinese Journal of Physics. 87: p. 118-137.

[45] Jalili, P., et al., (2023) A Novel analytical investigation of a swirling fluid flow and a rotating disk in the presence of uniform suction. Arabian Journal for Science and Engineering: p. 1-17.

[46] Ahmadi Azar, A., et al., (2023) Investigating the effect of structural changes of two stretching disks on the dynamics of the MHD model. Scientific Reports. 13(1): p. 21833.

[47] Jalili, P., et al., (2023) The HAN method for a thermal analysis of forced non-Newtonian MHD Reiner-Rivlin viscoelastic fluid motion between two disks. Heliyon, 2023.

[48] Karimi, M., et al., (2017) A Spatial and Mathematical Based Model for Solar Energy Potential Assessment and Optimal Lands for Solar Power Plant Construction in Iran.