[1]. Alam, J., Khan, M. A., Alam, M. M., & Ahmad, A. (2012). Seepage characteristics and geotechnical properties of fly ash mixed with bentonite. International Journal of Scientific Engineering Research, 3(8), 1-11.

[2]. CEA (Central Electricity Authority) (2023). Fly ash generation at coal/lignite based thermal power stations and its utilization in the country. CEA, New Delhi.

[3]. Singh, S. P., & Sharan, A. (2014). Strength characteristics of compacted pond ash. Geomechanics and Geoengineering, 9(1), 9-17.

[4]. Rout, S., & Singh, S. P. (2020a). Characterization of pond ash-bentonite mixes as landfill liner material. Waste Management & Research, 38(12), 1420-1428.

[5]. Ram, A. K., & Mohanty, S. (2022). State of the art review on physiochemical and engineering characteristics of fly ash and its applications. International Journal of Coal Science & Technology, 9(1), 9.

[6]. Nayak, D. K., Abhilash, P. P., Singh, R., Kumar, R., & Kumar, V. (2022). Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies. Cleaner Materials, 6, 100143.

[7]. Pradhip, V. P., Balu, S., & Subramanian, B. (2023). Pond ash as a potential material for sustainable geotechnical applications–a review. Environmental Science and Pollution Research, 30(46), 102083-102103.

[8]. Sharma, S., & Vyas, A. K. (2024). Evaluation of mechanical properties of cement mortars containing pond ash as partial replacement of river sand and prediction of properties by regression models. European Journal of Environmental and Civil Engineering, 28(11), 2679-2710.

[9]. Singh, C. K., & Kannari, L. D. (2024). Pond ash as a fine aggregate for controlled low-strength materials (CLSM): a study of its geotechnical and geoenvironmental aspects. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7(4), 3767-3781.

[10]. Nguyen, H. T., Nguyen, H. H., Nguyen, T. T. H., & Vu, Q. H. (2025). Experimental Study on Fly Ash-Cemented Soil for River Levee Overtopping Protection. Geotechnical and Geological Engineering, 43(2), 109.

[11]. Kedar, H. N., & Patel, S. (2025). Optimization and characterization of lime and GGBS treated fly ash for sustainable road pavement applications. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8(1), 91.

[12]. Simatupang, M., Edwin, R. S., Sulha, S., Putra, H., & Yanto, D. H. Y. (2025). The evolution of the hydraulic conductivity of fly ash-treated sand as a liquefaction countermeasure. Indian Geotechnical Journal, 55(1), 92-106.

[13]. Pani, A., & Singh, S. P. (2018). Effect of temperature on the strength of lime-stabilised fly ash. Environmental Geotechnics, 7(3), 189-199.

[14]. Rout, S., & Singh, S. P. (2020b). Influence of fibers on hydro-mechanical properties of bentonitic mixtures. Geotechnical and Geological Engineering, 38(3), 3145-3161.

[15]. Chowdhury, S., & Patra, N. R. (2021a). Experimental and numerical investigation on undrained behavior of geogrid reinforced pond ash. Indian Geotechnical Journal, 51(6), 1182-1194.

[16]. Chowdhury, S., & Patra, N. R. (2021b). Settlement behavior of circular footing on geocell-and geogrid-reinforced pond ash bed under combine static and cyclic loading. Arabian Journal of Geosciences, 14(11), 1063.

[17]. Chowdhury, S., & Patra, N. R. (2022). Undrained response of geocell-confined pond ash samples under static and cyclic loading. Geosynthetics International, 29(3), 229-240.

[18]. Chowdhury, S., Roy, S., & Singh, S. P. (2023). Performance assessment of three alkali-treated fly ashes as a pavement base-course material. Construction and Building Materials, 365, 130110.

[19]. Dandin, S., Kulkarni, M., & Wagale, M. (2023). Fly ash based subgrade reinforced with pet bottles as non-conventional geocell: a 3D finite element analysis. Geotechnical and Geological Engineering, 41(2), 1537-1556.

[20]. Kedar, H. N., & Patel, S. (2024). Complete replacement of granular base layer with stabilized fly ash for road construction. Indian Geotechnical Journal, 54(3), 1017-1031.

[21]. Pradhan, S. K., & Pothal, G. K. (2024). Experimental and cost evaluation of pond ash reinforced with polymeric geogrid. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7(1), 349-363.

[22]. Biswas, S., & Chowdhury, S. (2025). Prediction of Bearing Capacity of Closely Spaced Footings: Multilayer Geogrid-Reinforced Pond Ash Perspective. International Journal of Geomechanics, 25(6), 04025087.

[23]. Fu, J., Wei, J., Haeri, H., Sarfarazi, V., Chehrepak, M. M., & Fatehi Marji, M. (2025). Investigation of Failure Mechanism of Geogrid Reinforced Porous Concrete Based on Experimental Test. International Journal for Numerical and Analytical Methods in Geomechanics, e70002.

[24]. Abharian, S., Sarfarazi, V., Marji, M. F., Rasekh, H., & Sadrekarimi, A. (2023). Effect of geogrid reinforcement on tensile failure of high-strength self-compacted concrete. Magazine of Concrete Research, 75(8), 379-401

[25]. Nalbantoğlu, Z. (2004). Effectiveness of class C fly ash as an expansive soil stabilizer. Construction and Building Materials, 18(6), 377-381.

[26]. Zha, F., Liu, S., Du, Y., & Cui, K. (2008). Behavior of expansive soils stabilized with fly ash. Natural hazards, 47(3), 509-523.

[27]. Bose, B. (2012). Geo engineering properties of expansive soil stabilized with fly ash. Electronic Journal of Geotechnical Engineering, 17(1), 1339-1353.

[28]. Kedar, H. N., Patel, S., & Shirol, S. S. (2024). Bulk utilization of steel slag–fly ash composite: a sustainable alternative for use as road construction materials. Innovative Infrastructure Solutions, 9(1), 21.

[29]. Fan, R. D., Du, Y. J., Reddy, K. R., Liu, S. Y., & Yang, Y. L. (2014). Compressibility and hydraulic conductivity of clayey soil mixed with calcium bentonite for slurry wall backfill: Initial assessment. Applied Clay Science, 101, 119-127.

[30]. Du, Y. J., Fan, R. D., Liu, S. Y., Reddy, K. R., & Jin, F. (2015). Workability, compressibility and hydraulic conductivity of zeolite-amended clayey soil/calcium-bentonite backfills for slurry-trench cutoff walls. Engineering Geology, 195, 258-268.

[31]. Rout, S., & Singh, S. P. (2021). Prediction of compressibility and hydraulic conductivity of bentonitic mixtures. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 174(2), 225-237.

[32]. Subhadarsini, S., Giri, D., & Das, S. S. (2024). Parametric optimization of bentonite-fly-ash composite core for earthen embankment using Taguchi coupled sunflower optimization algorithm. Innovative Infrastructure Solutions, 9(2), 43.

[33]. Gupt, C. B., Bordoloi, S., Sahoo, R. K., & Sekharan, S. (2021). Mechanical performance and micro-structure of bentonite-fly ash and bentonite-sand mixes for landfill liner application. Journal of Cleaner Production, 292, 126033.

[34]. Kantesaria, N., Chandra, P., & Sachan, A. (2021, May). Geotechnical behaviour of fly ash-bentonite mixture as a liner material. In Proceedings of the Indian Geotechnical Conference 2019: IGC-2019 volume II (pp. 237-247). Singapore: Springer Singapore.

[35]. Rout, S., & Singh, S. P. (2023). Effect of compaction water on strength and hydraulic properties of bentonite-based liner. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 177(3), 291-302.

[36]. Kumar, R., Kanaujia, V. K., & Chandra, D. (1999). Engineering behaviour of fibre-reinforced pond ash and silty sand. Geosynthetics International, 6(6), 509-518.

[37]. Hosseini, M., & Fakhri, D. (2021). Experimental study of effect of glass fibres on properties of concrete containing micro-silica and limestone powder. Journal of Mining and Environment, 12(3), 895-906.

[38]. Boominathan, A., & Hari, S. (2002). Liquefaction strength of fly ash reinforced with randomly distributed fibers. Soil Dynamics and Earthquake Engineering, 22(9-12), 1027-1033.

[39]. Ghosh, A., Ghosh, A., & Bera, A. K. (2005). Bearing capacity of square footing on pond ash reinforced with jute-geotextile. Geotextiles and Geomembranes, 23(2), 144-173.

[40]. Fakhri, D., Hosseini, M., & Mahdikhani, M. (2022). Effect of glass and polypropylene hybrid fibers on Mode I, Mode II, and Mixed-Mode fracture toughness of concrete containing micro-silica and limestone powder. Journal of Mining and Environment, 13(2), 559-577.

[41]. Das, A., Jayashree, C., & Viswanadham, B. V. S. (2009). Effect of randomly distributed geofibers on the piping behaviour of embankments constructed with fly ash as a fill material. Geotextiles and Geomembranes, 27(5), 341-349.

[42]. Ghosh, A., & Dey, U. (2009). Bearing ratio of reinforced fly ash overlying soft soil and deformation modulus of fly ash. Geotextiles and geomembranes, 27(4), 313-320.

[43]. Sreedhar, M. V. S., Reddy, Y. S., & Jyothi, A. (2011, December). CBR characteristics of pond ash with reinforcement in fabric and fibre forms. In Indian Geotechnical Conference December (pp. 15-17).

[44]. Kumar, D., & Sengupta, S. (2022). Liquefaction resistance of polypropylene strips reinforced sand-fly ash blend under strain-controlled cyclic triaxial test. Innovative Infrastructure Solutions, 7(6), 355.

[45]. Tangirala, A., Rawat, S., & Lahoti, M. (2024). A year-long study of eco-friendly fibre reinforced cementitious composites with high volume fly ash and industrial waste aggregates. Innovative Infrastructure Solutions, 9(5), 179.

[46]. Mishra, K., Behera, S. K., Patel, S. K., Singh, P., Buragohain, J., Hazra, B., & Kumar, R. (2024). Experimental Investigation on the Mechanical and Microstructural Properties of Cemented Coal Ash Based Paste Backfill Reinforced with Polypropylene Fibre. Indian Geotechnical Journal, 1-15.

[47]. Sun, L., Fu, J., Wang, D., Haeri, H., Guo, C. L., & Cheng, H. (2024). Investigating the effect of various fibers on plasticity and compressive strength of concrete samples. Strength of Materials, 56(1), 200-208.

[48]. Fu, J., Sarfarazi, V., Haeri, H., Wang, Z., & Fatehi Marji, M. (2025). Improving the tensile strength of reinforced concrete: evaluating the impact of different fiber additives through numerical and experimental analysis. Computational Particle Mechanics, 12(1), 775-792.

[49]. Maher, M. H., & Gray, D. H. (1990). Static response of sands reinforced with randomly distributed fibers. Journal of geotechnical engineering, 116(11), 1661-1677.

[50]. Fatani, M. N., Bauer, G. E., & Al-Joulani, N. (1991). Reinforcing soil with aligned and randomly oriented metallic fibers. Geotechnical Testing Journal, 14(1), 78-87.

[51]. Maher, M. H., & Ho, Y. C. (1993). Behavior of fiber-reinforced cemented sand under static and cyclic loads. Geotechnical Testing Journal, 16(3), 330-338.

[52]. Ranjan, G., Vasan, R. M., & Charan, H. D. (1996). Probabilistic analysis of randomly distributed fiber-reinforced soil. Journal of geotechnical engineering, 122(6), 419-426.

[53]. Diambra, A., & Ibraim, E. (2015). Fibre-reinforced sand: interaction at the fibre and grain scale. Géotechnique, 65(4), 296-308.

[54]. Mukherjee, K., & Mishra, A. K. (2019a). Evaluation of hydraulic and strength characteristics of sand-bentonite mixtures with added tire fiber for landfill application. Journal of Environmental Engineering, 145(6), 04019026.

[55]. Mukherjee, K., & Mishra, A. K. (2019b). Hydro-mechanical properties of sand-bentonite-glass fiber composite for landfill application. KSCE Journal of Civil Engineering, 23(11), 4631-4640.

[56]. Mukherjee, K., & Mishra, A. K. (2020). Undrained performance of sustainable compacted sand-bentonite–glass fiber composite for landfill application. Journal of Cleaner Production, 244, 118662.

[57]. Karki, B., & Kolay, P. K. (2024). Modification of bentonite clay using recycled glass powder and polypropylene fiber. Geotechnical and Geological Engineering, 42(6), 5051-5064.

[58]. Deka, A., Gupt, C. B., & Sekharan, S. (2021). Analysis of WRCC of fly ash-bentonite mixes based on combined shrinkage and suction measurement. Geotechnical and Geological Engineering, 39(5), 3889-3901.

[59]. Kumar, R., & Kumari, S. (2024a). A feasibility study of fly ash and bentonite composite mix for assessing its suitability as landfill liner material. Sādhanā, 49(2), 98.

[60]. Kumar, R., & Kumari, S. (2024b). Exploring the geotechnical and microstructural properties of composite mixtures for landfill liner materials: an experimental investigation. Environmental Science and Pollution Research, 31(22), 33011-33029.

[61]. Mukherjee, K., & Mishra, A. K. (2021). Impact of glass fibre on hydromechanical behaviour of compacted sand–bentonite mixture for landfill application. European Journal of Environmental and Civil Engineering, 25(7), 1179-1200.

[62]. Mukherjee, K., & Mishra, A. K. (2022). An assessment of the mechanical performance of a novel sand bentonite-glass fiber composite for the avoidance of catastrophic landfill failure. Construction and Building Materials, 348, 128644.

[63]. Rout, S., & Singh, S. P. (2017). Assessing the suitability of compacted bentonite-pond ash mixes as landfill liner. In International Congress and Exhibition" Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology" (pp. 314-327). Cham: Springer International Publishing.

[64]. Kumar, R., Gupta, L., Kumar, A., Kumar, S., Aslam, M., & Gupta, A. K. (2024). Abrasion resistance of glass fiber silica fume concrete. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7(6), 5149-5169.

[65]. Yaswanth, K. K., Vani, V. S., Biswal, K., Kumar, G. P., Manjula, C., Govindarajan, S., Bhavani, G.P & Prameela, U. (2025). A critical analysis of compressive strength prediction of glass fiber and carbon fiber reinforced concrete over machine learning models. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8(3), 178.

[66]. IS 2720 (Part-III) 1980. Methods of test for soils:  Part 3 Determination of specific gravity, fine, medium and coarse-grained soils. India: Bureau of Indian Standards.

[67]. IS: 2720 (Part-IV)-1975 (Reaffirmed 2006): Methods of test for soils: Part 4 Grain size analysis. India: Bureau of Indian Standards.

[68]. IS: 2720 (Part-V)-1985 (Reaffirmed 2006): Methods of Test for Soils: Part 5 Determination of Liquid and Plastic Limit. India: Bureau of Indian Standards.

[69]. IS 2720 (Part-XII) 1980 (Reaffirmed 2011): Methods of test for soils: Part 7 Determination of water content-dry density relation using light compaction. India: Bureau of Indian Standards.

[70]. IS: 2720 (Part-X)-1991 (Reaffirmed 2010): Methods of Test for Soils: Part 10 Determination of Unconfined Compressive Strength. India: Bureau of Indian Standards.

[71]. Haeri, H., Khaloo, A. R., Shahriar, K., Fatehi Marji, M., & Moaref Vand, P. (2015). A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension. Journal of Mining and Environment, 6(1), 73-93.

[72]. Haeri, H. (2015). Simulating the crack propagation mechanism of pre-cracked concrete specimens under shear loading conditions. Strength of Materials, 47(4), 618-632.

[73]. Haeri, H. (2015). Erratum to: “Propagation mechanism of neighboring cracks in rock-like cylindrical specimens under uniaxial compression”. Journal of Mining Science, 51(5), 1062-1062.

[74]. Haeri, H. (2015). Experimental crack analyses of concrete-like CSCBD specimens using a higher order DDM. Computers and Concrete, An International Journal, 16(6), 881-896.

[75]. Sarfarazi, V., Haeri, H., & Shemirani, A. B. (2017). Direct and indirect methods for determination of mode I fracture toughness using PFC2D. Computers and Concrete, An International Journal, 20(1), 39-47. DOI:10.12989/cac.2017.20.1.039

[76]. IS: 2720 (Part-XV)-1986 (Reaffirmed 2002): Methods of Test for Soils: Part 15 Determination of Consolidation properties. India: Bureau of Indian Standards.

[77]. Mitchell, J. K., & Soga, K. (2005). Fundamentals of soil behavior. Virginia Tech University, Blacksburg, Virginia, USA.