The Influence of Various Nano-Additives on Performance, Emission and Combustion Characteristics of Syzygium Cumini (Jamun) Biodiesel Fuelled DI Engine | ||
| Renewable Energy Research and Applications | ||
| دوره 6، شماره 2، مهر 2025، صفحه 213-220 اصل مقاله (437.75 K) | ||
| نوع مقاله: Original Article | ||
| شناسه دیجیتال (DOI): 10.22044/rera.2025.14460.1315 | ||
| نویسندگان | ||
| Saravanakumar V1؛ Balu P* 2؛ Saravanan C3؛ Navaneetha Krishnan P3 | ||
| 1Research Scholar, Department of Mechanical Engineering, Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu, India | ||
| 2Associate Professor, Department of Automobile Engineering, Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu, India. | ||
| 3Assistant Professor (Sr.Gr), University College Engineering -BIT Campus, Anna University Trichy. | ||
| چکیده | ||
| Renewable and cleaner diesel engine fuel has received a lot of attention recently as a result of the depletion of fossil resources. In light of this, biodiesel has proven to be a viable substitute for diesel fuel. The finest B20 Jamun blends were combined with three different types of nano-additives to create Syzygium cumini (Jamun) biodiesel, which was tested in a naturally aspirated diesel engine. Global researchers are increasingly developing novel nano-additives, recognizing them as a promising and effective approach for enhancing fuel properties and engine performance. This technology was combined with different biodiesels. Also included in this chapter is an examination of a test engine using three distinct nano-additives: titanium dioxide (TiO2), zirconium oxide (ZrO2), and cerium oxide (CeO2). These additives were combined to create the best blends of Syzygium cumini (B20), and the results were evaluated based on factors such as performance, combustion, and output emissions. Additionally, a proposal is made to further improve the construction of a realistic and economically feasible nanoparticle addition for diesel and biodiesel fuel. | ||
| کلیدواژهها | ||
| Syzygium cumini (Jamun)؛ nanoadditives؛ performance؛ combustion؛ emissions | ||
| مراجع | ||
|
[1] Mukul Tomar & Naveen Kumar (2019): Influence of nano-additives on the performance and emission characteristics of a CI engine fuelled with diesel, biodiesel, and blends – a review, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2019.1623347
[2] Chen, A. F., M. Akmal Adzmi, A. Adam, M. Fahmi, M. Kamal, and A. G. Mrwan. 2018. Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management 171:461–77. Elsevier. doi:10.1016/j. enconman.2018.06.004
[3] Khalife, E., M. Tabatabaei, A. Demirbas, and M. Aghbashlo. 2017. Impacts of additives on performance and emission characteristics of diesel engines during steady state operation. Progress in Energy and Combustion Science 59:32–78. Elsevier Ltd. doi:10.1016/j.pecs.2016.10.001.
[4] Nithya S, Manigandan S, Gunasekar P, Devipriya J, Saravanan WSR. The effect of engine emission on canola biodiesel blends with TiO2. Int J Ambient Energy 2019;40:838–841.
[5] Venu H, Madhavan V. Effect of diethyl ether and Al2O3 nano additives in diesel-biodiesel-ethanol blends: Performance, combustion and emission characteristics. J Mech Sci Technol 2017;3: 409–420
[6] Panda, J.K., Sastry, G.R., & Rai, R.N. (2018). Experimental analysis of performance and emission on DI diesel engine fueled with diesel-palm kernel methyl ester-triacetin blends: a Taguchi fuzzy-based optimization. Environmental Science and Pollution Research, 25, 22035-22051.
[7] Sudeshkumar, Moranahalli Ponnusamy, Joseph Raj Francis Xavier, Pandian Balu, Veerasundaram Jayaseelan, and Kumarasamy Sudhakar. 2022. “Waste plastic oil to fuel: An experimental study in thermal barrier coated CI engine with exhaust gas recirculation." Environmental Quality Management. 1–7. DOI: 10.1002/tqem.21853.
[8] Balu P, Vasanthkumar P, Govindan P, Sathish, T. 2023. “An experimental investigation on ceramic coating with retarded injection timing on diesel engine using Karanja oil methyl ester,” International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2161632
[9] Harigaran A, Pandian Balu. 2023. “An experimental study on the performance and emission characteristics of a single-cylinder diesel engine running on biodiesel made from palm oil and antioxidant additive.” International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2162577.
[10] Ramanujam Soundararaj, Joseph Raj Francis Xavier, Rajendiran Ramadoss, Pandian Balu, Veerasundaram Jayaseelan,2021. Surface Ignition using ethanol on Mo and Al2O3-TiO2 coated in CI engine for environmental benefits. Advances in Environmental Technology 1 19-27, DOI: 10.22104/AET.2021.4591.1261
[11] P. Balu, P. Saravanan, V. Jayaseelan.2020. “Effect of ceramic coating on the performance, emission, and combustion characteristics of ethanol DI diesel engine.” Material today-Proceedings Vol.39.
[12] Prabu, A & Anand, RB 2016, ‘Emission control strategy by adding alumina and cerium oxide nano particle in biodiesel’, Journal of the Energy Institute, vol.89, pp.366-372.
[13] Ray, S, & Prakash, O 2019. ‘Biodiesel Extracted from Waste Vegetable Oil as an Alternative Fuel for Diesel Engine: Performance Evaluation of Kirlosker 5 kW Engine’. In Renewable Energy and its Innovative Technologies, Springer, Singapore. pp. 219-229.
[14] Sakthivel Gnanasekaran, Saravanan N & Ilangkumaran, M 2016, ‘Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodiesel’, Energy, vol.116, pp.1218-1229.
[15] Seraç, M.R.; Aydın, S.; Yılmaz, A.; Şevik, S. Evaluation of comparative combustion, performance, and emission of soybean-based alternative biodiesel fuel blends in a CI engine. Renewable Energy 2020, 148,1065-1073, doi:https://doi.org/10.1016/j.renene.2019.10.090.
[16] Ali Basem, Habib Forootan Fard, Farruh Atamurotov, Application of hybrid renewable energy systems for supplying electricity demand of a water pump station of agricultural plants: a case-based research, International Journal of Low-Carbon Technologies, Volume 19, 2024, Pages 1766–1779, https://doi.org/10.1093/ijlct/ctae126
[17]Fard, HabibForootan, Alavi, Morteza,Fahim, Sharabaty, Hassan, Ahmadzadeh, Milad, Mahariq, Ibrahim, Technical Design and Economic Investigations for Reducing CO2 Emission considering Environmental Protection Agency Standards by Employing an Optimum Grid-Connected PV/Battery System, International Journal of Photoenergy, 2022, 7360159, 13 pages, 2022. https://doi.org/10.1155/2022/7360159
[18] Sharifpur, M., Salem, M., Buswig, Y.M., Fard, H.F., Rungamornrat, J. (2023). Modeling CO2 Emission in Residential Sector of Three Countries in Southeast of Asia by Applying Intelligent Techniques. Computers, Materials & Continua, 74(3), 5679–5690. https://doi.org/10.32604/cmc.2023.034726 | ||
|
آمار تعداد مشاهده مقاله: 143 تعداد دریافت فایل اصل مقاله: 114 |
||